 |
Front Panel:
 |
8x input trim knobs, signal activity & clip LEDs |
|
8x low-cut filter switches |
|
8x pad switches |
|
2x 1/4-inch instrument input with 2x pads |
|
Phantom power (48 V) buttons for mic inputs |
|
Master volume knob |
|
Master mute switch |
|
2x 1/4-inch stereo headphone jacks with trim knobs for monitoring different input mixes |
|
2x dB-scaled VU meters with clip LEDs (software-assignable to any input/output pair) |
|
Power switch |
Rear Panel:
|
8x XLR balanced inputs w/ mic preamps |
|
8x 1/4-inch unbalanced line level input jacks |
|
8x 1/4-inch balanced line output jacks |
|
S/PDIF input and output RCA-type jacks |
|
2x 1/4-inch footswitch jacks for MIDI control of GearBox and 3rd party software |
|
Expression Pedal for MIDI control of GearBox and 3rd party software |
|
USB 2.0 connector |
|
Internal power supply and IEC cable |
Chassis:
|
2U metal rackmount design, 1/8-inch thick |
|
Durable black matte enamel with silver silkscreen for high legibility |
|
Chrome knobs, buttons and meter rings |
Software:
|
Built-in models of 18 guitar amps and 24 cabinets, 5 bass amps and 5 bass cabs, 6 studio-standard mic preamp models and 29 stompbox and studio effects |
|
ToneDirect™ Monitoring of your processed signal through the UX8 provides immediate responsiveness while you record - Watch the video here.
|
|
Hardware monitoring provides near zero latency |
|
Recording flexibility – monitor any pair of processed signals while sending either amp and effects, amp only, or completely dry signal to your recording software for later processing and effects bussing
|
|
Special TonePort UX8 software mixer provides cue-mix monitoring of up to 4 stereo pairs, ideal for live tracking |
AD Conversion:
|
16 bit and 24 bit |
|
44.1, 48, 88.2 and 96 kHz |
Measurements:
|
Max Input Level: 18.5 dBu |
|
12 dB more dynamic range for recording guitar than any similar interface |
|
Frequency Response: 20 Hz to 40 kHz +/-0.5 dB |
|
EIN: -125 dB A-weighted |
|
 |
Analog Input
Mic:
|
8x XLR rear panel balanced inputs with mic preamps |
|
8x front panel trim knobs |
|
8x 75 Hz low-cut filter switches |
|
8x -20 dB pad switches |
|
+48 V phantom power |
|
Impedance: 1.3 kΩ |
Instrument:
|
2x 1/4-inch front panel High-Z inputs |
|
2x -10dB pad switches |
|
Impedance: 1 MΩ |
Line:
|
8x 1/4-inch rear panel unbalanced line level inputs |
|
Impedance: 10 kΩ |
Analog Output
|
8x 1/4-inch rear panel balanced +4 dBu line outputs |
|
Analog main volume knob and mute switch |
|
Impedance: 600 Ω |
|
Max Output Level: 19 dBu |
|
Frequency Response: 20 Hz to 20 kHz -0.35 dB |
|
THD+N: 0.005% |
Headphone Output
|
2x 1/4-inch stereo headphone outputs |
|
2x front panel trim knobs |
|
Impedance: 50 Ω |
Digital Input/Output
|
S/PDIF stereo I/O |
|
RCA type connectors |
|
24 bit operation, up to 96 kHz |
|
 |
Mac:
|
Intel® or Power PC® based G4 1.5GHz or better (G4 1.67 or better recommended) |
|
|
OS X 10.4 or better
|
|
Host application that supports RTAS or Audio Unit (AU) Plug-ins |
|
512MB RAM minimum (1GB or more recommended) |
|
1GB free HD space minimum (10GB or more recommended for recording) |
|
Drive speed 5400rpm minimum (7200rpm or faster recommended) |
|
CD-ROM drive |
|
Internet connection required for activation (once activated, Internet connection is not required) |
Windows:
|
Pentium® 4 1.2GHz or better (2.5Ghz or more recommended) |
|
|
Windows® Vista and Windows® XP (with SP2 only) |
|
Host application that supports RTAS or VST Plug-ins |
|
512MB RAM minimum (1GB or more recommended)
|
|
1GB free HD space minimum (10GB or more recommended for recording)
|
|
Drive speed 5400rpm minimum (7200rpm or faster recommended)
|
|
CD-ROM drive
|
|
|
Internet connection required for activation (once activated, Internet connection is not required) |
USB:
|
One free USB 2.0 compatible port on computer (USB hubs not supported) |
|
