Community : Popular Threads - POD, Pocket POD, PODxt Family, FloorPODs, Bass PODs

MAC OSX 10.6 Snow Leopard x86 & Line6 Edit for PODxt Pro

support@line6.com — Mon, 28 Sep 2009 12:41:01 GMT

Guys,

I'm getting the following exception when trying to launch Line6Edit for my POD xt Pro on Apple's latest OS on a Mac Mini :

An exception was caught.

java.lang.UnsatisfiedLinkError: cmn.l6java.utils.L6EmbeddedUtils.nativeHideSplash()V

App info: Line 6 Edit 3.01 release - build 99 - Fri Oct 27 14:49:03 PDT 2006

Date: 9/28/09 1:37 PM

In thread: Thread[main,5,main]

OS: Mac OS X (10.6.1 i386)

Java VM Version: 1.6.0_15

Stack trace:

java.lang.UnsatisfiedLinkError: cmn.l6java.utils.L6EmbeddedUtils.nativeHideSplash()V

at cmn.l6java.utils.L6EmbeddedUtils.nativeHideSplash(Native Method)

at cmn.l6java.utils.L6EmbeddedUtils.HideLauncherSplash(L6EmbeddedUtils.java:39)

at line6editbase.app.L6EditorApp.Start(L6EditorApp.java:459)

at line6editbase.app.L6EditorApp.access$200(L6EditorApp.java:42)

at line6editbase.app.L6EditorApp$L6ELauncherBootstrap.OnLaunch(L6EditorApp.java:310)

at cmn.l6java.app.L6App.Launch(L6App.java:194)

Any ideas ?

Cheers,

Stricnine.

Windows 7 64bit

support@line6.com — Mon, 05 Oct 2009 04:31:17 GMT

Hi,

I just recently installed Windows 7 64bit operating system, this is final retail version.

I have POD XT live and Pod farm, etc and I installed the POD XT live drivers and Line 6 Monkey. However, whenever I play back an audio, it has a crackling sound.

I don't know why this is happening. I also browsed the forum and tried some of the suggested work arounds but this issue isn't resolved.

Can you please tell me what I should do to resolve this crackling sound?

Also the LIne 6 Monkey doesn't show anything listed all under Updates. I installed the Line 6 Monkey 64bit version that is supposed to be compatible for Vista 64bit but that

didn't make any difference and the crackling sound is still there.

Thank you for your help.

Charles Laub

email: charle39@gmail.com

POD XT Live ESN: 01466556

Pod XT Live Expression Pedal Failure

support@line6.com — Sun, 15 Nov 2009 17:47:30 GMT

My expression pedal has been giving me fits lately. During the last several performances (I play every weekend) it's been a guessing game with this thing. When I power up the unit it will perform as it always has in the past but lately after a short time the expression pedal will suddenly fail the result being full output of the particular patch down the line.. Sometimes if I power down and power back up the problem will go away but then reappear a short time later. It's unpredictable. Other times when I power up the expression pedal doesn't work at all, full volume. I've been running a cry baby down line to try to manage this but it very inconvenient and is certainly not what I want. I've read about recalibrating the pedal but that doesn't sound like thats the answer. The pedal does work SOMETIMES b ut only for a short time. Whats up?

Recording vids directly to PC using Mic or USB plug

support@line6.com — Thu, 19 Nov 2009 13:16:32 GMT

Hey I was wondering if this question/issue has came up in the past. I am trying to record a vid for youtube using my POD x3 live by using the webcam software provided with my PC. When I record direct, (mic or USB connection), there seems to be an audio clipping/dropout/chopping going on. I have adjusted the recording volume and that has cured the clipping issue so it records the full spectrum of the sound but it hasnt fixed the other problem. The volume dips on the recorded track and does not stay consistent. I think I have found a way to circumnavigate this issue but its somewhat of a headache by recording the video on mute and recording the track on Audacity Beta 1.3 (which is an awesome software!!) and then using windows movie maker to combine the two to overlay the tracks. If you have any ideas on how to remove that step I would greatly appreciate it. Thanks

Lee

PS When is line 6 going to produce a cabinet/amp to support the POD family similar to the Tech 21 and the Atomic? You guys make great amps and modelers and I think you are really missing out on a great market niche.

Line 6 Edit Errors and Crashes

support@line6.com — Fri, 20 Nov 2009 02:29:32 GMT

Hi everyone, it seems there's probs to use Line 6 Edit on MAC.

Line 6 Monkey and Line 6 audio drivers work well.

Line 6 Edit can't open and say an error message when open :

An exception was caught.

java.lang.UnsatisfiedLinkError: cmn.l6java.utils.L6EmbeddedUtils.nativeHideSplash()V

App info: Line 6 Edit 3.01 release - build 99 - Fri Oct 27 14:49:03 PDT 2006

Date: 20/11/09 03:00

In thread: Thread[main,5,main]

OS: Mac OS X (10.6.2 i386)

Java VM Version: 1.6.0_15

Stack trace:

java.lang.UnsatisfiedLinkError: cmn.l6java.utils.L6EmbeddedUtils.nativeHideSplash()V

at cmn.l6java.utils.L6EmbeddedUtils.nativeHideSplash(Native Method)

at cmn.l6java.utils.L6EmbeddedUtils.HideLauncherSplash(L6EmbeddedUtils.java:39)

at line6editbase.app.L6EditorApp.Start(L6EditorApp.java:459)

at line6editbase.app.L6EditorApp.access$200(L6EditorApp.java:42)

at line6editbase.app.L6EditorApp$L6ELauncherBootstrap.OnLaunch(L6EditorApp.java:310)

at cmn.l6java.app.L6App.Launch(L6App.java:194)

Tried to download Java Environment on SunnSystems webpage, it says concerning Apple MAC System/OS

that the java on MACOSX is included and should check MAC UPDATE for the plateform but it cant find anything new or updates.

I just can't use my gears on my laptop. Especially my POD PRO XT (Updated and full ModelPacks options)

So what now ?

Best regards

Jesse

forgot password, deleted email.

support@line6.com — Fri, 13 Nov 2009 04:12:09 GMT

i forgot my email password,deleted it. finally wanted to get back to my line 6 pod xt live and now i cant register it under a different user name cuz i cant remember my password to the old line 6 account. Help!

Getting hum when I plug my usb cable into my computer.

support@line6.com — Tue, 27 Oct 2009 20:47:05 GMT

I think I may have an unwinnable situation here. I get alot of hum whenever I plug in my PODxt to my computer via usb.
I can alleviate these problems by

Removing power from the laptop and having it run on battery power alone (I've tried different outlets and different power strips)

Not using a tone setting with a lot of overdrive

unplug the usb (duh), but that makes recording slightly impossible (I think)

If I touch either pickup (humbucker) the hum goes away

I've done some reading, and appears as though this is a ground loop issue that there isn't a solution for (or one I found)
Granted I am on some heavy meds and my focus isn't the best.
Now this does not happen on all guitars equally

So, does anyone know how I can have my USB and eat it too?

Thanks in advance. Oh yea, I can control the hum with volume as well, but I lose the dirt if I lose the volume.

I was looking at this http://www.amazon.com/Monster-MP-HTS850-Theater-PowerCenter/dp/B00006343O/ref=sr_1_17?ie=UTF8&s=electronics&qid=1256675022&sr=1-17

A power conditioner was recommended to me, but looking at the prices of them, there's no way I can afford one, unless I am looking at the wrong place.

Recording Music

support@line6.com — Wed, 18 Nov 2009 12:54:42 GMT

Hello,

I bought the line 6 pod farm for my boyfriend so he could record his music and burn it to a CD. When I went to Guitar Center, that is what I told them I was trying to do and they sold me the Line 6 Pod farm. And while he absolutely loves it and all that he can do with it, he still cannot seem to get it to actually record his playing to his computer in any format that can be shared or burned to a CD. Is he missing a step or is he missing some other system or program that is needed to actually be able to accomplish that part?

Thank you!!!

Pocket Pod Footswitch! Anyone know what this is?

support@line6.com — Tue, 17 Nov 2009 12:36:32 GMT

Found it poking around haphazardly.

http://www.youtube.com/watch?v=2sDm5nYn4kA&feature=channel

Pod 2.0 to laptop connection freak-out and frustration!

support@line6.com — Sat, 07 Nov 2009 01:26:25 GMT

I have been trying to download Line6 edit and Line6 Monkey, and I am way past frustrated. One of the main reasons I bought the Pod 2.0, was to go online and download custom tones. I can't even get the edit and monkey software to load...keeps asking me to make sure I am connected to the Internet because Java runtime environment needs to be installed, or to connect my Pod to my computer; I am, it is, but it won't.

...$200 for this Pod, and then I find out I have to buy a MIDI to USB cable in order to use it with my computer (seriously, how hard would it have been to have a freakin' USB port on the Pod 2.0? Should I really have to pay $300 for the Pod XT to have it. Come on, seriously???!!!). I'm a little annoyed until I find out the cable costs about 50 bucks, and "a little annoyed" turns into: really, really annoyed. I mean, come-on, 3 more cables and I could have bought another Pod 2.0!!

I've downloaded installed, uninstalled, and reinstalled edit, monkey, Java, and JRE a dozen times. I even completely reinstalled Windows XP on my computer to start fresh. NOTHING WORKS AND YOUR SUPPORT INSTRUCTIONS ARE CONFUSING AND INCOMPLETE!!!

Now, having said all this, I love the Pod 2.0 itself...great sounds. But can someone please help me GET THIS THING HOOKED UP AND TALKING TO MY PC BEFORE I GO COMPLETELY NUTTS?

Sincerely,

Alan

POD 2

support@line6.com — Sun, 15 Nov 2009 14:34:22 GMT

Have an original pod and software. Just got a macbook and tried to use software. Says, "Classic environment no longer supported". Is the software no longer useful? Is there something I can do to remedy the problem? Not a big techy and only need the capabilities that came with ver. 2. Thanks.

Upgrade not working properly

support@line6.com — Sat, 07 Nov 2009 23:31:30 GMT

I have a podxt live which is 4yrs old now. The problem that i am facing is that when i upgraded its flash memory with the newer version, line6 edit showed me the added amps and all but the thing is the patches dont work properly anymore. The reverb and delay didnt work for any settings. So i again rollbacked my version and now the delay and reverb are working properly and line6 is showing the earlier no. of amps.

New to Line 6....Need Help!

support@line6.com — Thu, 12 Nov 2009 17:37:36 GMT

Ok…I’m new to Line 6 products so forgive me if I sound ignorant & naïve about these products. I really could use some advice as to what products I need and how they work together. Any help and suggestions would be greatly appreciated.

Ok…first, what I am looking for:

1. I want to plug my guitar directly into a PA and be able to get great sounds from it.

2. I also want to do some desktop recording. I currently use Garageband 09 and I really like the Pod Farm interface and would love to be able to integrate it with garageband for my guitar tones.

3. I need to use some of the patches from the custom tone site in order to replicate specific tones when performing covers.

4. While I really want to use a unit for performing live, I don’t like the idea of having to be hunched over my unit trying to dial in tones. I would love to be able to have all of the tones I will need worked out ahead of time and just be able to trigger them later by stepping on a pedal.

5. I am confused between the line 6 monkey, pod farm, and gear box software. I want to be able to control my unit with the computer and then take the unit to a gig to recall what I created on the computer.

Some questions I have:

What is the difference between using a Pod X3 or XT with a FBV Shortboard instead of the X3 & XT Live models? I like the idea of being able to play with the pod without bending over and still have triggers to use with my feet.

When using custom tone, is it as simple as downloading the patch from the site and triggering when stepping on a pedal?

Thanks for any input…I’m new to this world of Line 6 and multi effect units and amp simulators.

Monkey doesn't show Pocket POD 1.01 flash update

support@line6.com — Wed, 18 Nov 2009 18:13:04 GMT

Hello,

I'm a customer from Germany and bought a Pocket POD back in December, 2007.

Today I read about the 1.01 flash upgrade for my Pocket POD and downloaded the Monkey software v1.31.

I connect my Pocket POD to the power adaptor first and after this connect it to my PC with the Line 6 USB cable, no other cables are connected to the POD.

The POD works fine with the Vyzex v1.17 software, so I launched the Monkey (after closing the Vyzex software). It connects to my Line 6 Account but shows "There are no updates available" :-(

[img]http://imghost.glorp.de/i/7515363356a7.png[/img]

The Pocket POD is registered within my account and the Monkey doesn't show any message about device registration either.

The POD shows "Version 1.00" at startup...

[img]http://imghost.glorp.de/i/22593416da5b.png[/img]

Thank you for any help.

IRELAND + UK Power Supply for POD 2.0

support@line6.com — Fri, 20 Nov 2009 14:46:40 GMT

The power supply for my 2.0 is crocked. I know this cus I took the unit into a shop in Derry and he took the power supply out of another POD on sale and plugged my unit in which worked perfectly. The shop has no power supply units in stock for sale on their own. Of course they can order them in but because we're not a major metropolitan area it could be weeks before the shop needs to place an order for stock with Line 6.

Every music shop between here and Galway I've visited and no one stocks Line 6. This fruitless drive around the country has peeved me right off.

Someone please sell me a UK (240/9V/1200w) Line 6 AC Power Supply or I'm gonna have to emmigrate. I'll buy it on line right now if you can point me in the right direction.

Pocket POD registered to my Account - Line6 Monkey says it is not.

support@line6.com — Sat, 14 Nov 2009 18:47:14 GMT

I purchased a Pocket POD a few weeks ago. I have registered it to my account and it appears in my account correctly (see attached image: line6_registration_page.jpg Note: username in web account & Monkey the same; serial number blurred out intentionally). I used the Serial # from inside the battery compartment. When I launch Line 6 Monkey v1.31 and log into my account, it give me a dialog box stating, "It appears you have not registered your Pocket POD with your user account." (see attached image: line6_pocketmonkey.jpg). If I click "Register Now...", it takes me to my account page where it shows my device registered to my account. I followed your FAQ and ensured my serial number was in the form 'XXXNLNNNNNNNNNN'. I have tried the following with no success:

Logged out of Line 6 Monkey and log back in.
Waited 1 week to see if the serial number just needed time to associate.
Installed latest version of Line 6 Monkey on a different computer.
Deleted my registered device and re-registered it.

Current state of affairs: My device is currently registered to my account through the website, however Line 6 Monkey still shows it as unregistered.

Although the device is not registered it has allowed me to update to the latest firmware: 1.01, however I would like to ensure that my device is properly registered.

OS Info:

I have tried on 2 different machines running:

Windows Vista x86_32bit Professional and Ultimate.
Both are single boot systems.
The POD is recognized on both systems.
The Vyzex editor recognizes the device and I can control the POD through it.
Both machines are Intel Core 2 Duo, but running 32 bit versions of OS.
Both machines have 3 2.0 USB ports. I am connecting the POD directly to the computer.

Software Installed Machine 1:

Clean install with following software added
Reason + Record
EMU Patch Mix for a EMU 1616m
ASIO4All
Line 6 Monkey 1.31

Software Installed Machine 2:

Old OS install Vista 32bit Ultimate
Business Apps (MS Office)
Reason 4
Ableton 7
NI Kore
Sound Forge 9.0
Reaper
FruityLoops Studio
ASIO4All
ProTools 8.x
Digi002 Rack
Digi MBox2 Micro

Please advise on how to associate my POD correctly with Line 6 Monkey.

I've switched my email addres...

support@line6.com — Fri, 06 Nov 2009 04:15:09 GMT

my user account: "timothyclee" was created when I purchased my POXT live, but I can't remember my password, and the email me my password function does not work since I no longer have that email address associated with this account. Please help

Pod XT ASIO drivers stop working in Cubase

support@line6.com — Mon, 09 Nov 2009 12:22:38 GMT

I'm using a pod xt with Cubase SX. I need to run Monkey every time I use Cubase to get any sound in or out from the pod. When I don't do anything for a while, then try to use Cubase, I get no input or output until I run Monkey again, then it works. I don't need an internet connection for monkey to connect to - just firing it up lets Cubase use the pod again. Any ideas? cheers

Is there a video anywhere that shows how to navigate the buttons on my pocket pod

support@line6.com — Tue, 17 Nov 2009 04:01:53 GMT

Is there any documentation or better yet, any video that better shows how to navigate the buttons and knobs on my pocket pod. The instruction book doesnt explain how to navigate it clearly enough for me.

Thanks for any help

I have just downloaded Edit but it will not work.

support@line6.com — Thu, 19 Nov 2009 21:59:58 GMT

I have just downloaded Edit but it will not work. First problem; "unable to download Java Runtime.

Then downloade Java (V6.17) from Sun site. Edit still unable to find Java.

From the FAQs files this seems to be a problem that has been around for at least 6 months. When are you going to fix it Line 6?

Free Pod Farm Plug-in for PODxt Pro owners?

support@line6.com — Fri, 13 Nov 2009 17:10:21 GMT

I recently was made aware of the fact the certain owners of the PODxt Pro were eligible for a free POD Farm plug in. Was a notification sent out to registered owners of this? I did not see any. Am I able to receive this gift as well as a registered PODxt Pro owner?

Thank you

Kevi aka camtah

user ID is: 458855

AUX input on floor pod plus

support@line6.com — Wed, 18 Nov 2009 00:16:55 GMT

Connected mp3 player to aux input using stereo jack; comes through rt channel only of headphones - is this expected? Uncomfortable listening to anything through only one channel of a headphones. Any advice? Thanks. N.

E-prom chip for pod

support@line6.com — Sat, 29 Aug 2009 23:52:47 GMT

I called and requested an updated e-prom chip for my pod. Any idea on how long before it ships?

Windows Vista 64 bit problems with ASIO Pod XT

support@line6.com — Mon, 09 Nov 2009 19:56:26 GMT

When I run a DAW (cubase SX or Reaper), I get no input or output (even though I've selected the correct ASIO Pod XT drivers) until I start Monkey. Once Monkey starts everything works, for a while. Occasionally it'll stop working until I start Monkey again, and sound is once more. I can't recall having this trouble with these programs using Vista 32 bit.

Anybody know of any issues here?

Cheers

update usb firmware pod xt from 1.01 without MIDI USB interface?

support@line6.com — Mon, 16 Nov 2009 13:20:15 GMT

Hello

I have a pod xt and want to use it for things like reamping. I'm working on a macbookpro snow leopard. I can't connect the pod via USB, I have an error message on the preference panel. The gearbox tells me to update the usb firmware, but I can't do that with line6 monkey because ot the version of the firmware that does'nt allow to update with usb!

I found this workaround but I don't want to spend money just to update the firmware. Is there another way to get my pod xt working on snowleopard?

Q: My unit cannot update via USB, and I have Flash Memory 1.01. How do I update from Flash Memory 1.01 to a newer version?

A: First, verify if you have 1.01. Please hit the TUNER button and scroll using the SELECT knob to the last page. If you have a version later than 1.01, you can use your USB connection.

In order to update your PodXt from version 1.01 to the latest version, you will need to download Line 6 monkey (as described above) as well as a MIDI to USB interface. We recommend the MIDI SPORT UNO from M-AUDIO. Install the drivers for your interface, then run LINE 6 MONKEY with your POD XT unit connected to your interface. Click on the CONNECT USING MIDI CABLES button, and make sure that you see the MIDI IN and MIDI OUTS set to your interface. Then go through the FLASH MEMORY installation as described above. After this is done, you will be able to update your PODxt series unit using USB. See the following link for more information on connecting to your Line 6 unit via Midi:

Line 6 pocket pod, something doesn't work

support@line6.com — Wed, 11 Nov 2009 00:32:27 GMT

Hi,

my name's Jacopo Tropia, I'm an Italian customer, I bought some days ago your product "line 6 pocket pod" I think it's really nice for a musician, but I got some problem with that: I'm using a small laptop, I would like to have, to download or to play with new customized sounds. As is written on the instruction manual, your "pilot's guide" I downloaded "Vyzex Pocket Pod" and I dowwnloaded also "line 6 monkey". I had the following problem, and I would like if is possible more information,advice or othe; I really like your product. 1) My laptop doesn't reach to connect with the pocket pod,

2) I don't have midi because my computer is a simple and common laptop, so Vyzeks doens't work 3) line monkey asked me what kind of instruments I have but it's not written pocket pod 4) It's impossible don't know why to register the product.

I like the poket and I'd like to use that how is written, I would like to download, customize and create sound. Pleas if is possible for you to answer to my email address jacopomasterx@yahoo.it I wwould like to solve the problem with my laptop, you can send me if it's possible all the prograamss and the way for solve it. I'm lookin forward to hear from you

Second-hand PODxt Live Registration

support@line6.com — Thu, 19 Nov 2009 18:15:32 GMT

Hi,

I recently bought a second-hand XT Live but I am unable to register it as it has been registered by a previous owner. (I contacted the guy I bought it from but he claims he bought it second-hand himself and it was already registered. I now have no way of contacting the guy who registered it.) The serial number is 21FPD3P5528002676. I would appreciate if I could get this resolved. Thank you.

Regards,

Eoin.

help request

support@line6.com — Sun, 15 Nov 2009 08:55:14 GMT

hello
i have purchased the floor pod plus about two weeks ago and the store i bought it from (your only importer in israel) didnt had a case(gig bag) for it.
they told me to came back in two weeks for it because they supposed to get a new shipment ,but after one week the store was closed and probably for good.
i hope you can help me with this problem because i dont have anyone to turn to.
i dont know if u r the person that can help me and if not please pass this to the right hand .
i hope for replay any time soon

thank you

lior

Pocket POD: Is Cabinet Tuning of Amp Out jack Independent of Direct Out/Phones jack?

support@line6.com — Sat, 24 Oct 2009 10:41:41 GMT

Here's the scenario: Let's say I want to feed the Amp Out into my Amp's FX Loop Return while simultaneously feed the Direct Out/Phones jack to the PA. I want the Amp Out sound to be without cab emulation, but I want the Direct Out/Phones sound to have cab emulation. Is this now possible given the recent fix of the Cab Tuning feature? If so, how do i set it up? The manual is silent as to whether this scenario is possible and it implies further that the Cab Tuning feature is specific only to the the Amp Out jack. If this is not the case, what did the fix really do?

PODxt Soundcard Problem

support@line6.com — Fri, 13 Nov 2009 16:43:08 GMT

I get random clicks, pops, static bursts every once in a while when I use PODxt as a soundcard. It happens when I am using my recording software and when playing music with wmplayer or winamp etc. More when I am making music though. I believe it has got nothing to do with CPU because it sometimes goes clean for a long time when I am working on a project with tons of recordings, VSTis, automation and stuff; then it suddenly makes a killing sound burst on a project with just one midi track and a simple VST. I have three USB (2.0 I guess) ports on my laptop. I've got a midi keyboard, a wireless mouse and PODxt attached to them. Disabling my onboard soundcard and wireless LAN won't help. Trying different settings for ASIO stuff (sample rate, bit depth etc.) won't help either. The laptop had Vista 64 bit installed. I had the above problem and i decided to install XP and make the machine dual boot as Vista is no good for making music (and anything else as a matter of fact). The problem persisted in XP too. Then I read somewhere in the site that as dual-boot machines are instable (?) Line6 does not provide support for them. I hoped maybe this was the problem and made a format, and I installed only XP SP3 this time. Nothing changed. I would really appreciate any help, I tried everything I could think of. Peace.

windows 7 compatability with podxt live, variax, workbench

support@line6.com — Tue, 17 Nov 2009 17:18:22 GMT

I am looking to upgrade my computer to windows 7.

i wanted to make sure before i did if the programs to run podxt live and the workbench software are supported.

i did a search before making this ? and did not find a thread that answered my question.

I know that I can try running the programs in compatability mode, but I found a few responses saying they had problems with that also.

sorry if this is already somewhere you can just post the link to the thread for me if your a better searcher than me.

thanks

About Recording of Pocket Pod

support@line6.com — Mon, 16 Nov 2009 02:39:36 GMT

Hi,

Can I record music on my Macbook with Pocket Pod? I try it last night but I didn't hear anything.

I had a PodxtLive too. I used to record a music in GarageBand with it. Just plug in the USB cable.

Or I have to do it another method or software?

Thank U very much!

Regards

Keith

Permanently saving a custom tone to my Pocket Pod

support@line6.com — Tue, 17 Nov 2009 03:56:40 GMT

I just got a Pocket Pod. I hooked up the unit with the USB cable and it is functioning through the software.

What numbers are the empty presets in a new pocketpod and how do I permanently save a custom tone that I like to one of those presets. I assume that I would want to be saving the custom tone to an empty preset?

Thank you!!!

Phaser effect in POD XT live

support@line6.com — Fri, 23 Oct 2009 19:31:04 GMT

Hi,

I can't find a phaser patch in the POD XT live. I used to have the HD Spider Valve HD100 (GREAT amp) and it had a great phaser effect, but I can't find one in the XT live.

Thanks,

Richard

Substitute for Line 6 EX1 Expression Pedal

support@line6.com — Thu, 03 Sep 2009 17:00:11 GMT

Can anyone recommend a substitute for Line 6 EX 1 Expression Pedal for the POD XT Live !?

I read the reviews for the Line 6 pedal and they are really poor. So I thought may as well go in for a different brand of external expression pedal to attach to my Line 6 POD XT Live !

Bass pod

support@line6.com — Wed, 11 Nov 2009 20:35:19 GMT

can anyone tell me what the impedence of the headphones output is..?

XT Live driver installation problem

support@line6.com — Fri, 13 Nov 2009 23:06:32 GMT

I have followed all the necessary steps to install the drivers for my LINE 6 XT Live serveral times and on three different computer. The sofware installs on the computer via windows but at the finish screen it states that 'This device cannot connect'. I am well skilled in IT - can you please help.

re: Pod XT Live and installing line 6 edit

support@line6.com — Thu, 12 Nov 2009 23:11:17 GMT

Hi,

I've got a new laptop and trying to install Line 6 edit.

Windows Vista home premium.

During the install procedure, I get a msg at the end which says "unable to download the Java runtime environment".

I tried installing Java after this was done, but L6 edit still does not open.

I tried un-intalling L6 edit and re-installing, but still get the msg.

There are many, many posts to the forum about this issue, so many that I don't know what I'm supposed to do.

Please advise.

Thanks very much. This product rocks with my U2 cover band!

-Bob

PodXT not connecting on OS X via USB

support@line6.com — Wed, 29 Apr 2009 13:48:02 GMT

Hi,

I have a PodXT and I am trying to get it connected to my mac. I have a new MacBook (unibody one). Its running Leopard 10.5.6

I have downloaded the latest drivers, 4.1.0.

Its not detected in either Gearbox or Line6 Monkey.

I can connect to the PodXT using midi but GuiterPort Online doesn't support midi.

I've looked at a few posts on here and there are similar problems. Some have been solved by connecting directly to the mac rather than using a USB Hub. I have tried both and neither work.

Any help would be great.

Thanks,

Jamie

Bass pod pro

support@line6.com — Mon, 16 Nov 2009 05:26:05 GMT

My unit recently began to cut out signal. It looks like it is re-booting almost, and then the sound will come back temporarily and it all starts over again. Is there a battery for this unit that might cause it to freak out like this??? If so, where can I get a replacement and find instruction on how to change it?

Cannot register my PODxt

support@line6.com — Fri, 13 Nov 2009 17:23:30 GMT

I wish to register my PODxt to my current account because I do not remember what my previous account was.

Bass Pod xt live warranty question

support@line6.com — Sun, 15 Nov 2009 01:58:18 GMT

My Bass Pod XT Live has reverted to esn 000000000 and usb 0.0, and will not connect via usb.

I've read on threads that a secure memory chip may have to be replaced(?).

Is the repair covered under the warranty in Canada?

Can't register my used PodXT Live...

support@line6.com — Wed, 18 Nov 2009 21:07:25 GMT

Tried unsuccessfully to contact previous owner, please help!

Bass PodXT Midi Timeout

support@line6.com — Wed, 25 Mar 2009 01:58:07 GMT

Well I finally figured out my first problem, that was caused by having the device plugged into a hub.

So on to my second problem, again everything has been updated and computer meets specifications.

Now, everything is showing that the connections are good, and the pod shows up when I start Line 6 Edit, but when the Tone Locker tries to connect I am getting a midi timeout. At the same time the process bar is showing it trying to connect the display on the pod fade in and out not completely out just dim a little.

I also received the following message;

MIDI Timeout while requesting manual mode patch

cmn.l6java.patch.L6PatchManager$DeviceNotConnectedException: null

App info: Line 6 Edit 3.01 release - build 99 - Fri Oct 27 14:49:03 PDT 2006

Date: 3/24/09 7:15 PM

In thread: L6Thread - 'L6MIDIJava dispatch thread' - started at cmn.l6java.midi.L6MIDIJava.L6MIDIJava.Start - line 206

OS: Mac OS X (10.5.6 i386)

Java VM Version: 1.5.0_16

Stack trace:

cmn.l6java.patch.L6PatchManager$DeviceNotConnectedException

at cmn.l6java.patch.L6PatchManager.AcquireDevice(L6PatchManager.java:658)

at cmn.l6java.patch.L6PatchManager.RequestDeviceEditBuffer_Sync(L6PatchManager.java:717)

at cmn.l6java.patch.L6PatchManager.RequestEditBuffer(L6PatchManager.java:391)

at line6editbase.editor.L6Editor.SetCurrentPatch(L6Editor.java:673)

at line6editbase.editor.L6Editor.SetCurrentPatch(L6Editor.java:601)

at line6editbase.editor.L6Editor.OnMIDIPatchChange(L6Editor.java:932)

at cmn.l6java.patch.L6PatchManager.NotifyListenersOfPatchChange(L6PatchManager.java:886)

at modules.sharctone.device.L6SharcTonePatchManager.OnPC(L6SharcTonePatchManager.java:133)

at cmn.l6java.midi.L6MIDIManager.OnPC(L6MIDIManager.java:626)

at cmn.l6java.midi.L6MIDIManager.HandleTrackedPC(L6MIDIManager.java:307)

at cmn.l6java.midi.L6MIDIManager.OnMIDIEvent(L6MIDIManager.java:173)

at cmn.l6java.midi.L6MIDIJava.L6MIDIJava.DispatchMIDIData(L6MIDIJava.java:550)

at cmn.l6java.midi.L6MIDIJava.L6MIDIJava.Run(L6MIDIJava.java:612)

at cmn.l6java.core.L6Thread.run(L6Thread.java:158)

No me funcionan los models packs en el POD FARM con mi POD XT Pro

support@line6.com — Sat, 14 Nov 2009 04:23:13 GMT

Tengo un POD XT Pro con todas las actualizaciones de los models pack y bass comprados desde hace tiempo. He instalado el POD FARM usando la licencia que compré del Gearbox plug-in y funciona pero no me autoriza a usar los extra models.

¿Cómo puedo conseguir que funcionen????

problems with FBV Shortboard recognition, and older product registration

support@line6.com — Mon, 16 Nov 2009 05:15:39 GMT

in trying to use my brand new FBV Shortboard MKII, 1 #1. the Windows [found new hardware]Wizard cannot find the driver # 2. Line6 Monkey can't locate the FBV Shortboard anymore [ the Shortboard is receiving power from the USB Cable, and Windows initially notes "FOUND NEW HARDWARE" but the Wizard can't locate theFBVdriver.

in going to the line6 website, i noticed that most of my line 6 equipement is not registered - i registered all of it by mail and on liune. when i tried to re-register the stuff. i was told it was already registered to someone else. about 1-1 1/2 years i had trouble with my password and i called you guys up and i thought we cleared all that up. it's all under the same email address . i swear there is so much trouble with the software\computer side of using your stuff, sometimes i can hardly get to the music

POD 2.0 and PODxt are the

support@line6.com — Sun, 15 Nov 2009 00:44:17 GMT

Presets compatable? If someone sends me a preset from their xt and I have a 2.0 will I still be able to use the preset?

If this question is idiotic I am sorry, I still want to know but...sorry!

Thanks for your help...

Mark

Ran Line6 Monkey on new computer, now the Metal pack add-on is gone from my PODxt.

support@line6.com — Mon, 16 Nov 2009 11:57:45 GMT

I just bought a new computer (Intel core i5, Asus p7d55d motherboard, 4 gb ram, Windows 7 home premium 64-bit)
I istalled the latest Line 6 drivers for Windows Vista/XP since there was none for Windows 7 (why?). Anyway,
it all went nice and smooth.
When I try to re-activate the add-on (Metal pack) in Line 6 Monkey 1.31, the progress bar when "programming
hardware" goes up to about 80%, then an error message appears;

"Transaction failed.
Reason: (Code 80007104) Failed write to firmware"

I know it's not my hardware that is failing (USB ports, cable whatever).
In the Help & Info bar the following message appears:

      "There was an error determining which Add-Ons you have installed. ((Code 80007506) The asset table in the hardware is corrupt.)
      Click the 'Reinstall' button to fix this problem (you must be connected to the Internet)
      Call Customer Service if you click 'Reinstall' and still see this error.

So, this re-activation B***S*** has actually corrupted the software in the PODxt,
and made the Metal pack disappear from my POD?
Sorry, i'm really disappointed.

Please help

Line 6 Edit Problem

support@line6.com — Wed, 22 Apr 2009 01:35:44 GMT

I just downloaded line 6 Edit 3.0 for my XTLive. When I try to open it, I get this error message:

An exception was caught.

java.lang.UnsatisfiedLinkError: cmn.l6java.utils.L6EmbeddedUtils.nativeHideSplash()V
App info: Line 6 Edit 3.00 release - build 96 - Wed Apr 19 17:14:08 PDT 2006
Date: 4/21/09 6:30 PM
In thread: Thread[main,5,main]
OS: Windows Vista (6.0 x86)
Java VM Version: 1.6.0_13

Stack trace:

java.lang.UnsatisfiedLinkError: cmn.l6java.utils.L6EmbeddedUtils.nativeHideSplash()V
at cmn.l6java.utils.L6EmbeddedUtils.nativeHideSplash(Native Method)
at cmn.l6java.utils.L6EmbeddedUtils.HideLauncherSplash(L6EmbeddedUtils.java:39)
at line6editbase.app.L6EditorApp.Start(L6EditorApp.java:459)
at line6editbase.app.L6EditorApp.access$200(L6EditorApp.java:42)
at line6editbase.app.L6EditorApp$L6ELauncherBootstrap.OnLaunch(L6EditorApp.java:310)
at cmn.l6java.app.L6App.Launch(L6App.java:194)

I'm not sure what to do. Can someone please guide me.

Pod 2 audio cuts out when in A.I.R. amp mode

support@line6.com — Wed, 11 Nov 2009 02:58:19 GMT

My POD 2.0 audio cuts out intermittently ONLY when in AIR- Amp mode (not when in direct mode). My Line 6 authorized service person suggested I reload the firmware to eliminate software issues before I bring it in for hardware troubleshooting. I downloaded the Motopod 2.54 file. I have updated Monkey and Line 6 Edit. How do I reinstall firmware through MIDI?

Reamping issues W/ PodXT Pro

support@line6.com — Sat, 07 Nov 2009 17:24:04 GMT

Hi there-

I'm attempint to capture affected trackes(S/P-DIF L&R) for RT performance/BU and a clean track for reamping which is coming from Unprocessed Guitar Out, but am having problems with my PODxt Pro sending a sample rate of 96k/24b through S/P*; When I set Digital Out to 48k, I get signal, but not at other rates. I've tried to sync to the host with 'Match SPDIF', and it doesn't lock. So I've attempted to achieve a lock by putting the input to SPDIF, with only inf. feedback loop when 48k is selected. no results with any other rate. My host session (interface driver) is set to internally clock at 96k. The interface is an M-Audio Profire 2626 (firewire, not that the connection is relevant).

The audio engine is Sonar8 producer. I do have POD Farm plugin, but latency is an issue until post-tracking.

Capturing the affected tracks arn't extremely critical, but would limit my options to capture & revert to my client's 'original' sound, since reamping at this sample rate (as well as time) is at issue, and jitter is introduced on the analog outs..

If you need more info, let me know.. Any help is greatly appreciated!

Thanks!

ToFue

how to upgrade pod 1.x to 2.0?

support@line6.com — Wed, 04 Nov 2009 09:53:34 GMT

I bought a second hand pod ( thought it is 2.0). but turn up is pod 1.x. and i read throught infro, found out i can get some chips to upgrade my pod to 2.0. but there is problem, that i need to register the gear first, when i try to registed it, there is not a pod 1.x option. i try pod 2.0, but error message" gear not match with product code). so what can i do with it?

is that possible to buy the chips in new zealand?

cheers

Already registered?

support@line6.com — Fri, 20 Nov 2009 09:26:51 GMT

Hi there, it turns out my second hand PODXT LIVE pedal is already registered... the seller has never used this pedal with a PC so has never registered the number online before. Is someone hacking my rego number? whats the deal?

hopefully you can help me out with this one

Thanks!

-Jordon

pod farm + podxt pro + win 7 64bit

support@line6.com — Fri, 16 Oct 2009 11:35:46 GMT

I have line6 pod xt pro and pod farm ;and I just installed windows 7 64 bit ultimate.
I downloaded:

pod farm 1.11
Line_6_Drivers_v3.4.3.8_Installer
Line_6_Monkey_v1.31_Installer
Line 6 Edit v3.02 Installer

1---line 6 monkey can not see my pod xt pro.
2---Line 6 Edit does not work
3---how can I put the License keys for pod farm?

Please advise

thank you in advance

info@3rdeg.com

have some problem

support@line6.com — Fri, 13 Nov 2009 00:25:25 GMT

I got bass pod xt live at 1years ago.

and I want to register. so I joined www.line6.com and downloaded monkey

I was entering sirial number but before owner had been enter sirial number I don`t know his phone number T.T

FBD2P5538005387

that is my bass pod xt live sirial

please check it

and while useing pod xt live, I think this is very good! I love use more line6 product thank you ^^

Connecting POD 2.0 to the computer

support@line6.com — Fri, 20 Nov 2009 20:14:04 GMT

Hi.

I am new with all this. I bought a POD because I met someone that recently began playing electric guitar(a customer).

He told me that POD 2.0 was cool, because I could download effects and stuff.

Now I'm standing and not knowing "how" to download these effects.

The problem is not how to install the program or actually download the effects.

The problem is that I don't know how to connect my POD to the computer.

I tried using a jack cable connected to the right and left output slots in the POD and then

I used the other side of the jack and connected it to what seemed like the "line in slot"

to my sound card. It says Line In at the back of my cabinet. We are talking about a static computer.

I tried using that filemonkey software but it couldn't detect that my POD was in.

Should I use another software or am I doing it all wrong?

I also bought a stealthplug because I was told that it could help me to connect the POD to my computer

and edit the music.

I don't know how to activate my sound card to communicate with my POD. How do I do that?

Am I even writing the right place? All this is very confusing and I could really need some support from someone.

And I use windows XP.

I really want to download some metal effects or maybe some effects with Eric Clapton so it could be cool if someone could link a guide

that I need or at least tell me what to do :=)

Thanks in advance.

Bass PODxt Pro as an FX looped device

support@line6.com — Mon, 16 Nov 2009 03:52:44 GMT

I am looking at a Bass PODxt Pro and want to use just the rear connections as the FX unit via my Hartke amp FX loop. This may be knit picking but I wan't to use the Hartke 12AX7 preamp before I hit the PODxt. Is it possible to leave the FX loop out to the line in on the POD and send the processed signal to the FX return on the amp?

Greetings...

support@line6.com — Fri, 13 Nov 2009 20:23:01 GMT

I am looking for a solution that would allow me to have a solid, dependable, quality USB connection to my PC but also give me the most distance from the PC that I can get. The simplest thing would be to find some sort of USB Hub or USB extender that is 100% line6 compatible so I could have say a 6ft-8ft USB cable from my computer go to the hub, then the std. distance from the Hub to the Toneport. The idea is to get everything except the laptop off the stage but still use the toneport for Vocals & Audio output to the mixing board.

Has anyone any ideas on the best way to achieve this type of setup?

PODX3Live

support@line6.com — Fri, 20 Nov 2009 17:42:45 GMT

Hello,

I can't find anywhere to specifically address this issue. I'm thinking of selling my current PODxtLive and BassPODxt so I can get a PODX3Live. I just love the 'everything in one place' idea, with both guitar and bass as well as vocal options, and mixing and matching them, plus dual tone. But, you know all this, don't you?

What vexes me is not knowing, before I do this, whether I can use the Varriax input for ALL my Variax guitars. I've got the Variax700 Electric, Acoustic AND Bass guitars. Will I be able to plug them all in to the PODX3Live (Obviously, not at the same time)? If the answer is 'yes', then that puts me over the edge. Thanks for your time.

Geoff Ginter

pod xt factory reset

support@line6.com — Sun, 13 Sep 2009 11:29:45 GMT

Hi.

Help wanted! I can factory reset pod xt.How made?Thanks

De-Register problem

support@line6.com — Thu, 19 Nov 2009 19:48:00 GMT

Hey I just sold a XT Live to another guy and I want to de-register it from my name so he won't have problems when he goes to register. I tried using the option but it comes back with "there's a service attached to this device". I don't know if he has an account yet so I can't give you the user name of the buyer. Can you guys please de-register it from my list of stuff ? Thanks.

probleme maj

support@line6.com — Fri, 20 Nov 2009 11:05:40 GMT

je voudrai mettre mon pocket pod en version 1.01 mais quand je lance le logiciel line 6 mokey je n'ai pas la ligne Flash Memory (voir screen shot)

Pourtant mon pocket pod est bien en version 1.00... que faire?

Where is the Bassamps located in my POD xt LIVE?

support@line6.com — Thu, 19 Nov 2009 08:14:12 GMT

Hi,

I bought the bassexpansion bundle over internet, it must have installed right in my pod because... When I using Internet I have an "internetpc". I am downloading, save it on an USBmemory and then install on my MUSICPC wich is not hooked up with Inet. Now when I open Gearbox in my MusicPC I have the BASSbundle and can manipulate the sounds as with the guitarsounds, but in my physical POD xt LIVE I don`t see any of the BASSAMPS wich make it difficult to use the XT Live without a computor What am I doing wrong?

Best regards Micke S./Sweden

pod xt pro 4 buttons innoperante

support@line6.com — Wed, 18 Nov 2009 09:11:41 GMT

hi all

i have a little problem with my pod

i have installed the lastest versions of the firware and all is upgraded

but the 4 buttons under the screne are innoperante i cant use those buttons, it's very very .......

PodXT USB Firmware Update

support@line6.com — Fri, 23 Oct 2009 16:23:24 GMT

I am the original owner of PoDXT SN:21SPD1H5250014583.

I have tried in vain to update via Monkey to USB Firmware 1.12 from 1.00.

I was able to update the flash memory to 3.01 but the USB firmware upgrade says that it completes but then I get this error:

"There was an error communicating with your device. If it is a USB device, try disconnecting then reconnecting the USB cable."

Error:(Code 8000900C) MIDI device timed out waiting for response."

Duh!

I have tried from both Vista and Win2kPro with the same results.

What's the dealio?

Pod XT Live into Engl Invader 150

support@line6.com — Tue, 03 Nov 2009 18:25:23 GMT

Hey guys,

Well I bought my Pod around a year ago when I was playing a Marshall MG100HDFX - going through the FX loop I pulled a decent sound out of it. I have since upgraded to an ENGL Invader 150 (good lord, I cannot describe how perfect that head is!)

Now when I connect my Pod to my head (I've tried running it in the front as well as through the FX loop) it literally cuts my tone in half. The ENGL has amazing distortion, but even with EVERYTHING off (Amp modelling, Effects, Compression etc.) it completely destroys my tone.

Help! While my guitar sounds amazing through the head alone, and it's not the guitar (PRS Custom 24), but I miss my effects!

Cheers,

Tristan.

How do I Register a second hand POD 2.0

support@line6.com — Tue, 17 Nov 2009 11:07:56 GMT

Hey,

Just got a POD 2.0 from eBay.

If I cannot contact the original owner, how can I register it under my details?

cheers,

Andy

Blank Yellow Screen....most times

support@line6.com — Tue, 20 Oct 2009 22:55:55 GMT

About two weeks ago or so I noticed that sometimes when I flipped on my POD XT Live the yellow screen would light up blank; nothing else woudl come on. It happened more and more frequently since then and now that is all that happens. Except, sometimes the AMP, STOMP, and MOD pedals light up red as well.

I've tried everything (unplugging, different power outlet, starting it holding down SAVE and EDIT, etc.) I'm growing very frustrated because I have an audition coming up.

I contacted the only service guy in my area (Kansas City....really? Only one?) and he said if it as something that needs work it would probably cost $400 or so. Are you kidding me? That's more than I paid for the thing.

Somebody...give me the fix. Tell me how to fix this thing. I'm desperate....please!!!

PODxt Flash Memory Installed Version Listed as "-" in Monkey

support@line6.com — Sun, 26 Apr 2009 14:33:17 GMT

Monkey says the newest version of Flash Memory is "3.01", but that my installed version is "_". The "Update Selection" button is greyed out. Instead of a Green Checkmark, or a Yellow Exclamation Point, there's a Grey Question Mark.

My PODxt version information lists "v3.01", USB 1.12.

I'm not sure if I have to do anything, or can.

registro de usuario

support@line6.com — Thu, 19 Nov 2009 07:27:37 GMT

Compre un POD xt Pro pero nunca lo di de alta en internet, (por falta de tiempo, etc.) No. de Serie 21PPX1P5731002043.

lo quize registrar pero me dice que ya esta dado de alta por otro usuario sindo que yo lo compre directamente con un distribuidor autorizado de Mexico Hemes music estoy buscando la factura de compra que si la tengo.

Solo quiero saber si despues de 2 años de haber comprado el equipo lo puedo registrar para poder descargar gratis el software para editar efectos y las galerias.

Muchas gracias por su atencion.

Error in reactivating

support@line6.com — Tue, 27 Oct 2009 14:39:40 GMT

On trying to reactivate my add-ons (after having to reinstall my software) I get the following:

"There was an error in determining which Add-ons you have installed (Code 80007506) The asset table in the hardward is corrupt"

Any ideas?

Trouble with POD 2.0 MIDI connection...

support@line6.com — Thu, 19 Mar 2009 07:01:25 GMT

Ok, so I've had my POD 2.0 for about 2 years now and I just found out that it's possible to connect it to a computer and download custom tones. My problem is that I cannot find a MIDI interface cable that gets the job done. I went to Guitar Center (where I purchased said POD) and asked if they carried the correct cable to which they replied, "I don't know, none of us has ever done that before." I've been to every other music shop in Spokane and I'm amazed to find that none of them knows anything about my POD 2.0 or how to connect it to my computer. I bought a cheap Chinese (the packaging literally has no manufacturer logo or name on it whatsoever) MIDI to USB cable from a local cable shop and it doesn't work at all. If anyone knows of a MIDI to USB cable or other interface setup that actually works I would very much appreciate the input. Oh, and I'm running Windows Vista 64 on my PC. Please don't ask why... I ask myself that very same question every time I start up my machine and I don't have an answer yet.

Thank you.

win7 support

support@line6.com — Fri, 20 Nov 2009 05:31:07 GMT

support for win7 cant seem to connect to podxt i think is a driver iss. thank you for your time in this matter

Problems with Download Java Runtime Environment for Line 6 Edit v 3.02

support@line6.com — Sat, 07 Nov 2009 21:00:29 GMT

Hi,

I have Java 6 Standard Edition (Version 6, Actualization 17) on my computer.

Trying to download from Monkey v1.31 the Line6 Edit 3.02 brings the following errors:

'Unable to download the Java runtime environment 1.5.0 .Setup will continue. Line6 will not work until JRE is installed.'

When I try to download tones from customtone I get the error:

'Cannot find valid JRE'

and

'Could not init JNI Loader'

What shall I do? Without being able to download tones, my POD XT Live is not worth a lot for me.

Would be nice if you have a idea. If I have to install another Java Software, pleas tell me exactly where I get it. On the SUN-Website are so many versions. I feel lost.

Thanks for your help

Thomas Schneider (thomas.schneider@img.com)

Im not receiving password resets!!

support@line6.com — Thu, 19 Nov 2009 20:49:07 GMT

Hi, I have another account Username: Gibbo47n which I think is linked to email account Gibbo47n@yahoo.co.uk. I have been trying to log in for the last week or so to download Variax Workbench as I have recently purchased a Line 6 Variax 700 Guitar, but unfortunatly I m having trouble remembering my password and Iv reset it several times but still I have not received an email with my password reminder to the above email. I have tried to re register myself and I have been successful but when Iv tried to re register my POD XT LIVE Iv been unsuccessful as it is currently registered with other username. Can you please advise me of what I need to do to be able to reset my password? I can supply other security information iif neccessary. Thanks

Original Bass Pod

support@line6.com — Fri, 20 Nov 2009 19:36:47 GMT

I have an original Bass Pod and I would like to update to the latest software version, and bring this baby up-to-date. What do I need to do?

Need help to register a used PODXT Live

support@line6.com — Wed, 18 Nov 2009 22:06:14 GMT

I bought a used PODXT Live (like many) on EBAY February 2, 2008. Today I tried to register it but it is registered to someone else (probably Steve Bruening). The serial number is 21FPD1P5535003806. I have a copy of my Paypal receipt which I can sendt. Can you help me Line6***?

Thank you
Richard.

POD xt shows: USB: 0.00 ???

support@line6.com — Wed, 18 Nov 2009 10:45:27 GMT

Hello

My pod XT shows the informations (when I push Tuner and select the informations)

PODxt: 2.01

USB: 0.00

ESN: 0000000

And in fact I can't connect it to my pc with usb...

Can anyone help me?

Pod 2.0 and Floorboard

support@line6.com — Tue, 17 Nov 2009 00:39:52 GMT

I have been using a POD 2.0 for about two years now and love it along with the floorboard. The Wah stopped working -- no sweep -- so I took it to an electronics place in Rochester, NY -- worked for a short time. Now nothing. I bought a new Floorboard that was at House of Guitars last week. Again, no wah. Is it possible it's my POD that is causing this to happen? I find it unlikely that two floorboards, one fresh out of the plastic in a new package, don't work.... wondering if it's possible it's my POD 2.0.

POD effect pack addons

support@line6.com — Mon, 09 Nov 2009 22:06:14 GMT

Just a quick question :

I own a POD XT and use that for recording through a splitter to get both a clean and a distorted signal into ProTools.

Recently I purchased PODfarm, in order to be able to re-amp my clean tracks within ProTools. And it works just dandy.

So the question is : If I buy, say the Metal Shop effects pack for the POD XT - will this pack also be available in PODfarm, or do I have to purchase the pack twice?

- sorry if this is a silly question, but it occured to me that the addons you buy, register to the hardware you choose, so I was just wondering.

Thanks in advance,

/Nick

PODXT FVB Shortboard wont switch banks??

support@line6.com — Thu, 12 Nov 2009 22:00:48 GMT

Hi, I have a pod xt and a fvb shortboard. When I plug in the fvb shortboard the board lights up to channel one, but will only switch the banks DOWN and when it does lets say switch to bank 34 it starts blinking and I cant change from patch 1 to 2 and so on. the fx loop doesnt light up either... but the fx switches seem to still turn the FX on and off.

if you try to switch the banks up nothing....if you switch down it just starts blinking the channels.

The unit hasnt been dropped or banged around at all in fact it has a case ...

I have switched RJ45 cables ...no diffrence

I have used a 2 channel footswitch in place of the fvb shortboard ...it changes the banks up and down fine.

Is there some kind of calibration I can reset or have any of you heard about an issue like this.

Thanks for your advise.

No sound on new POD UX1 Windows vista PLEASE HELP!!!

support@line6.com — Sat, 15 Aug 2009 19:47:21 GMT

Hey guys,

So i just bought this POD UX1 yesterday and I installed it last night, it was all set up and everything looked good. I plugged in my guitar to the instrument input, but i had no sound. I think I am getting an audio signal, the green bars are going up when i play a note but there is no sound whatsoever. I have the Line 6 POD farm disc in, it is installed and everything, i have the USB cord attached from the POD UX1 to my computer. If someone could help that would be awesome.

Thanks

I am getting very frustrated i bought this thing for 210$ and it doenst even Freakin work...

FBV2 Troubles

support@line6.com — Tue, 10 Nov 2009 06:09:10 GMT

Does anyone have a schematic?

I really can't afford to send it in, and I have the skills and tools to fix it my self. but i need a schematic.

Thanks in advance.

Line 6 studio ux2 question.

support@line6.com — Tue, 17 Nov 2009 18:09:18 GMT

Would I be able to use passive studio monitors with the ux2? Does it have an amp built in to [owere the monitors? Or will i just have to use powered monitors...?

Thanks

Brandon

bass & 6 string

support@line6.com — Thu, 05 Nov 2009 05:36:36 GMT

I need to switch quickly on occassion from bass to 6 srting electric. Is it possibe to install a few basic 6 string patches on my bass pod XT Live. i would like to just unplug my guitar cable from one instrument to the other and select an appropriate patch on the pod. I'm playing direct through the PA - no amp on stage. Sound tech would be resposible to adjust each instrument for the mix. I monitor through aviom.

Not a technical question, but functional

support@line6.com — Tue, 17 Nov 2009 09:49:12 GMT

Hi,

I bought my Pod 3rd hand and have no receipt what so ever. I still would like to register. How can I do this?

Kind Regards,

Honestytwo

Pocket pod

support@line6.com — Thu, 29 Oct 2009 20:02:12 GMT

Hello i download in 2 mac computers Mac os X version 10.5.6 and also in a G4 and still not working what can i do i reinstall it and it same thing what can i do thank you for your help.

POD Question

support@line6.com — Sat, 14 Nov 2009 18:58:06 GMT

I own a POD that I upgraded with the newer EPROM (It reads pod 2.0 when depressing the manual button and turning on the power and then it goes to 3, so I guess it is 2.3 software?).

I have a Line 6 Floor Board as well. These were purchased at different times.The POD case has a plug -in that is marked "PEDAL" so the POD should not be compatible?

My dilemma is that the board does work in every aspect except that I have volume issues with some selections. That is to say that some selections are very loud and some require volume increases through either the guitar or the floor board pedal. Many are the same volume however.

Would the board not work at all or is it possible that it could function "partially" as in the volume issue?

What would you suggest I do if I need to replace one or both of these components?

I am not a gearhead so could use some very simple advise on the above question as well as the best way to connect the POD to my Peavey Classic 30 amp & 112 extension cab.

I would greatly appreciate your help.

Thanks!

Bass POD XT registration

support@line6.com — Sat, 07 Nov 2009 08:13:01 GMT

Hello

I bought the bass pod over 5 years ago and thought it was time to register it.

Unfortunately I foung out that the previous owner was still registered.

What is the procedure to undo the previous registration?

Thanx a lot

George Kakavas

Can my XT Live do this?

support@line6.com — Mon, 16 Nov 2009 23:21:15 GMT

Pardon me if this is a really dumb question. I have a laptop running Windows XP that is replacing an old desktop computer. I will be installing some music recording/editing software (vendor not yet selected - but something very easy to use). I plan to connect my drum machine and synthesizer module to the computer and control them with the software. My old desktop had a game controller to MIDI port that was used to send MIDI information to these devices. My laptop only has USB. I was going to purchase a USB-to-MIDI adapter. But it occurred to me, can I just use the XT Live to act as the USB-to-MIDI adapter? That is, can I connect the laptop to the XT Live via USB and then chain the drum machine and synth to the XT Live via its MIDI ports?

pod xt live's tuner/tap tempo button

support@line6.com — Fri, 20 Nov 2009 20:52:34 GMT

my button no longer works is there a fix for this? it slowly stopped working i would have to press harder and harder, as time passed, to get the tuner to engage and now it doesnt work. any help?

Voltage for podxt live

support@line6.com — Thu, 12 Mar 2009 16:47:45 GMT

the ac/dc power converter for my xt live says that it is rated for an input voltage of 100 volts. Is that right? Nothing is wired at 100 volts.

it just stopped

support@line6.com — Tue, 17 Nov 2009 08:21:46 GMT

on my gig we set up and did sound check,the pod pro xt worked great like italwats did, so it was our turn in an hour so we waited then we got up to play. my guitar made no sounds so i turned it off then i turned it back on. the monkey did not show up or anything. the screen is just lit up, the tap button is on the clip light and so is the signal light is on. can you guys help me out i connected it to my computer to get it checkd out but the minkey on the computer says everything works fine, i also tried to save a bundle and that did not work it saud error. im really bumed out i have had this for years and now its doing this. i hope you guys can help me and have a great day, my name is roman and my email is synystersoloest@aol.com

PODXT Line 6 Edit Java Error Under OSX 10.6.1

support@line6.com — Mon, 28 Sep 2009 23:53:23 GMT

I received the following error when attempting to run Line 6 Edit (POD XT) on my Mac, OS X, 10.6.1 Snow Leopard ..........

An exception was caught.

java.lang.UnsatisfiedLinkError: cmn.l6java.utils.L6EmbeddedUtils.nativeHideSplash()V

App info: Line 6 Edit 3.01 release - build 99 - Fri Oct 27 14:49:03 PDT 2006

Date: 9/28/09 6:54 PM

In thread: Thread[main,5,main]

OS: Mac OS X (10.6.1 i386)

Java VM Version: 1.6.0_15

Stack trace:

java.lang.UnsatisfiedLinkError: cmn.l6java.utils.L6EmbeddedUtils.nativeHideSplash()V

at cmn.l6java.utils.L6EmbeddedUtils.nativeHideSplash(Native Method)

at cmn.l6java.utils.L6EmbeddedUtils.HideLauncherSplash(L6EmbeddedUtils.java:39)

at line6editbase.app.L6EditorApp.Start(L6EditorApp.java:459)

at line6editbase.app.L6EditorApp.access$200(L6EditorApp.java:42)

at line6editbase.app.L6EditorApp$L6ELauncherBootstrap.OnLaunch(L6EditorApp.java:310)

at cmn.l6java.app.L6App.Launch(L6App.java:194)

Please advise what I must do to successfully run Line 6 Edit under this version of Mac OS X Snow Leopard.

Expansion packs mutually exclusive?

support@line6.com — Tue, 10 Nov 2009 15:11:26 GMT

For the Pod XT Live, I purchased a special a while back for the Collectors Classic and the metal shop. Installed those OK and they worked fine. Later, I wanted the bass pack, and noticed it was cheaper to buy the bass pack with the collectors classics, than it was to just buy the bass pack. When I installed that, the metal shop rigs dissappeared. Is there a way with what I've purchased to get all three to work together? Thanks.

bass pod pro

support@line6.com — Fri, 20 Nov 2009 21:10:15 GMT

Which, if any, of the fbv series pedals will work with a bass pod pro rack unit. It is not the xt series. I am looking to add a pedal board to mine.

Pod 2.0 - Noise every time "Tap(Hold)" button flashes

support@line6.com — Wed, 04 Nov 2009 13:42:14 GMT

Hi, just a quick question. When the "Tap(Hold)" button flashes, there is a pulsing noise with each flash. Is there a way to eliminate that sound? The POD Version 2.0 has been great in the studio apart from that noise that is very distracting during quiet parts, so much so, that it makes the unit unusable. Thanks in advance for the reply and, hopefully, the solution.

Sincerely,

PODxt Live & Windows 7

support@line6.com — Tue, 20 Oct 2009 11:56:02 GMT

Are both the software (Gearbox) and PODxt Live drivers available for Windows 7? If so, are there any known issues?

Thank you.

Feedback problems with POD

support@line6.com — Sun, 08 Nov 2009 16:07:56 GMT

For both my solo and gain sounds I have a lot of feedback trouble. I need to have the noise gate settings very tight (decay around 15% and threshold 15%). I use the Spinal Puppet amp, but i dont have more than1 o clock gain.

I think most of the noise comes from me using the screamer stomp box. I need this to get the sound I want and in the start I had it set on 100% for both level, gain and tone. Now I have reduced both to 60% but still it makes a lot of noise. And when I say noise, I really mean it. It's pretty extreme. If I just turn of the noise gate the POD immediately starts to make a lot of noise even if I mute all the strings...

I think it's very strange I need to use this much noise gate because it reduces all sustain... Honestly it's my only problem with the Pod.

What is the reason for all the noise? Can it be reduced somehow??

POD XT Mount

support@line6.com — Fri, 06 Nov 2009 09:43:39 GMT

I recently bought myself a POD Mount, one of these:

https://www.globalfulfillment.net/gfsnet/line6/10Expand.aspx?ProductCode=98%20POD%20MOUNT

Whilst I love the product in theory, in practise the rubberized pins that push into the holes on the POD don't seem quite big enough. There is a bit of friction when you push them in, but if I pick the POD up without supporting the Mount, the Mount instantly falls away under its own weight. I presumed the rubber pins would fit more snuggly than this so that the POD would be a little more securely attached to the Mount. So I wondered what your opinion is on this and - if you think it sounds faulty - whether I might be able to get four more rubber pins to try out with the Mount?

Also, I understand that you can use screws to attach the POD to the Mount. Should the Mount have come with some screws (mine didn't), or is it up to us to source them? If it is up to us, do you have any details about what type of screws need to be used - in terms of diameter, and more importantly length (I don't want to use screws which are too long and end up interfering with or breaking the PCB or electronics inside).

I would really appreciate any help on this

Many thanks

Max

Cannot load drivers for POD XT LIVE Using Windows 7

support@line6.com — Sat, 04 Jul 2009 21:45:26 GMT

I have tried using earlier versions of Monkey. I am using a 64 bit computer. I got monkey to recognize my toneport kb37 but not my xt live.

iLok License

support@line6.com — Thu, 19 Nov 2009 15:04:24 GMT

Hello-

When I purchased my X3 Live, I was told that I would eventually be able to get a free iLok license for Pod Farm. I've had it over a year now and haven't been able to find a way to get the iLok license deposited to my account. Any help would be most appreciated as the X3 does not work well with my Logic / 002 rig.

Thanks-

Chris Arias

Atlanta, GA

404-964-6231

How do you reset a second, added on expression pedal

support@line6.com — Sun, 13 Sep 2009 04:11:12 GMT

I had a problem with my podxt's expression pedal. I wanted it to go to zero so I tried the recalibration steps which line 6 kindly gave me in a ticket for support. It did go back but seemed to wander slowly and eventually wandered up to around 16% as the minimum - useless for tweaking some stomps such as pitch bender. So I bought a second expression pedal, an M-audio. I tried it and at first the second pedal, the add-on was at zero. However it wandered so I tried recalibration - oops, I forgot to unplug it while doing the recalibration process. Now amazingly the first pedal does zero and does it normally, BUT the second one is now way off so that I couldn't even use it for a volume, minimum is about 20-30%.

I tried to do a factory reset. No good. Reinstalled all the latest stuff, even though I had it, from the line 6 monkey. No good.

My Question is: If there is a process to recalibrate the first expression pedal, which I guess resets something like 'firmware' or software maybe, WHAT is the process to recalibrate that same firmware or software for the second, added on expression pedal.

After the problems with the first pedal line 6 told me to get the podxt to a repair person. If it was the physical pedal or pivot for the pedal I would have to do that, but if it is just some kind of software reset, why should I pay the big bucks for $50 an hour or more work, when I may have found a question or issue that isn't yet explored. I believe they call it finding a bug in the programme.

Anyone out there help me, or at line 6, please?

Thanks in advance. Aidan.

UX2

support@line6.com — Sat, 07 Nov 2009 13:19:19 GMT

Hi,

I am currently using my macbook to record tracks on Logic Express (Version 8) and garageband.

I have no difficulty in recording guitars and midi instruments. However, I have recently purchased a soundtronics STC-2 condenser mic and can't get it to work. I know the mic s working - but can't get anything out of it using the ux2 with logic express or garageband. I assume this will have something to do with settings, altough I expcted to see some response on the level monitors on the ux 2. I would welcome any suggestions.

Many thanks

Howard

no funciona el banco ¨d¨ ni el tap

support@line6.com — Wed, 23 Sep 2009 06:46:08 GMT

buenas noches lo que pasa es que intento e intento cambiar el efecto al banco d y no cambia empezo no funcionando bien no me respondia hasta que queria, primero fue el tap pero como no lo utilizo mucho lo ignore y ahora esto, bueno es todo el problema que tengo y gracias por su ayuda

p.d. me refiero a que es externo en el hardware el problema por que cambio el efecto mediante la computadora y no hay problema cambia el efecto pero mediante el footswith pedal no

Pocket Pod and Line6 Monkey

support@line6.com — Sat, 11 Jul 2009 11:31:20 GMT

What are the steps to select the device in Line6 Monkey for my new pocket pod?

I don't see an option to select Pocket Pod in the list of devices. Also if I select Pod 2.0 - it doesn't update the firmware.

I am using a macbook. How do I know if the USB cable is bad? The lights are on, on the Pod so I am guessing it is powered.

Just bought a Pod 2.0

support@line6.com — Tue, 28 Jul 2009 16:45:21 GMT

Hi there,

I recently purchaesd a used Pod 2.0 Guitar unit. The device powers on and cycles through the PoD2.0 on the display, then the screen sits at 0 with the c lit up next to it. None of the buttons respond to pressing, and no sound comes out either the main outputs or the headphone out.The cables I am using are known to work, and I am using unbalanced connectors. I have tried outputting to my amp and straight into my mixing desk.

If I keep powering off and powering on, maybe 1 in 100 times I may have one of the buttons light up, e.g. the 'Manual' button, and the 'Tap (Hold)' button will flash when pressed, and a noise is produced from the unit. However, only the 'Output Level' dial will have any effect, and none of the others make any difference. Powering off and on again in this situation results in the original problem described.

Have I been sold a unit that is beyond repair, or is there anything that may be a likely cause to this?

Much appreciated.

Thanks

Factory Reset for PODxt Pro

support@line6.com — Wed, 25 Mar 2009 17:53:26 GMT

Hi all,

I'm new to the Line 6 range and the Pod family.

I've just bought an XT Pro that is a few weeks old. I know the first owner adjusted a few settings, is there any way I can do a Factory Reset as is possible on other products?

I'd like to make sure everything is as it should be before I start enjoying myself.

Cheers
Barry

POD 2.0 hardware not detected by Line 6 Edit Software

support@line6.com — Sun, 14 Jun 2009 13:12:55 GMT

Hello,

I have a POD 2.0 and I have been trying to connect it to the Line 6 Edit software by using a MIDI / USB cable. I did connect the MIDI OUT inlet of the POD with the MIDI IN cable and the MIDI IN inlet of the POD with the MIDI OUT cable. These two MIDI cables end in a little box hardware device provide with 3 LED lights, red, yellow and green. The red LED light is on when I plug it on my computers USB port. However the other yellow and green are always off.  When I install the Line 6 software it asks me to plug the POD with the MIDI / USB cable to the computer and asks to select the MIDI in and OUT ports and type of device. My POD is turned on. I press the MIDI key in the POD and select A, meaning to select all MIDI channels. Which channel should I use? Which is the channel of the PC or Line 6 Edit software? In the software I cannot select any MIDI in port since it does allow me to choose any option. I can select the MIDI out port, I select “Creative USB Soundfont Synth” since I have a Soundblaster creative soundcard. The other option is to select “Microsoft GS Soundfont Synth” whatever I choose does not work. When set any of these parameters it tells me that the MIDI ports that I have selected can not be opened. Therefore I do not succeed to establish the connection. What should I do?

my e-mail is ae285@cam.ac.uk

Thank you very much

product registration

support@line6.com — Sat, 07 Nov 2009 11:42:43 GMT

hi ive jusr bought a podxt on ebay and want to register it but the system says its already registered can you help please

How can I register an idem registered already?

support@line6.com — Sat, 22 Aug 2009 04:20:54 GMT

I bougth an used pod xt live at guitar center that is already registered by the previous owner and I'm not able to contact him, how can I register it then?

the serial number is : (21)FPD1P5502005816.

Midi Controller with PODxt when using amplitube JH?

support@line6.com — Sun, 28 Jun 2009 18:39:47 GMT

Hey guys, I was just wondering if this would be possible.

I have a PODxt which I have been using as an audio interface for use with amplitube Jimi Hendrix. I have only downloaded the demo version but I love what I'm hearing. What I would like to be able to do is to switch the effects on and off and also have an expression pedal so I can control wah or univibe speed. I don't want to spend the money getting the full version if I then have to go and buy one of IK's stealth pedals and the extra boxes to go into it. Would something like the behringer FCB1010 plug into the PODxt and then be able to control the effects on amplitube?

I'm really not up to speed MIDI and I would really appreciate anyones thoughts on this.

Mirrorball

POD 2.0 connection to computer = PROBLEM

support@line6.com — Thu, 13 Aug 2009 13:40:36 GMT

Hello !

So, i have a problem connecting my POD 2.0 to my computer. It just simply doesn't work !

When i open Line6 Edit i have absolutely no device to choose from, and when i open Line6 Monkey the POD 2.0 isn't listed...

Here's what i have tried already and the gear i'm using:

First i bought a Midi to USB cheap cable (Swissonic). It didn't work, so i sent it back and got a M-Audio Midisport UNO, which is more expensive, and should work properly.

I have tried different versions of Line6 Monkey and Edit. None of them work. I have installed both the Midisport drivers from the CD and from their website (not at the same time ofcourse) and it doesn't work.

I have tried plugging the cable with the POD turned off and turning it on on the device choice page, or doing it with the POD anlreay plugged in, neither worked.

I have downloaded the Flash thing but i don't know where to put it or how to open it.

There's simply no way to make it work

podfarm plugin with ux1 logic 8 mac

support@line6.com — Wed, 12 Aug 2009 21:10:43 GMT

I got podfarm and gearbox to work in logic pro 8, but i hear no sound from the guitar, I don't know if i own podfarm plugin, it doesn't show in the Line 6 Monkey app but it is funcional in logic pro 8. Does this mean I have to buy the pod farm plugin to make it work? The thing is, I don't want to buy pod farm plugin and figure out that I already have it and that I had the wrong settings. Isn't pod farm plugin suppose to be free with ux1s anyways?

Thanks

EDIT** I don't hear sound and there's no indication that my guitar is going through the input, and my ux1 is the soundcard

FBX Wah Volume pedals broken help!

support@line6.com — Sun, 23 Aug 2009 08:52:24 GMT

Ok. I just started playing one day, engaged the wah and realized that it was working. The pedals engage and the led's come on but no response. I am using it with a PODxt. It is a fbx longboard. I have tried to recalibrate it and it seems to reset the pedals but still doesn't calibrate or respond at all to the pedal movement. I am nowhere near a service place because I am in Japan and there is only ONE. I have tried many things, but just want to get it fixed. Any suggestions? I assume that I need new sensors or something, but it is wierd. Looking for any help, but be specific please, I have already tried most things.

Thanks.

POD XT stuck on a preset

support@line6.com — Fri, 24 Apr 2009 07:05:51 GMT

Hi,

I was using my POD XT for about an hour today and then it suddenly got stuck on a preset. The "select page" knob doesn't seem to work, nor do any of the other soft buttons. I've tried restarting, reinstalling the flash memory, but nothing has worked. Help!

I lost the cable that came with my Pod xt

support@line6.com — Fri, 03 Jul 2009 06:10:47 GMT

What type of usb cable is need to connect my pod xt to my pc so I can install monkey?

XT Live USB output level much too high

support@line6.com — Thu, 07 May 2009 22:26:08 GMT

Hi,

my POD XT Live produces a way too high recording level through the USB / ASIO connection. Audacity, Riffworks, Ableton all heavily distort because the the level hits maximum.

On my old Win XP machine, this all worked fine. Now, on my new XP machine, with the POD being unchanged, it doesn't. I have to reduce the volume with the pedal to about a fourth to get a normal recording level.

- The output mode is studio direct

- The output switch is in "line" position

- POD is connected via USB to the computer

- Replaying formerly recorded songs through the POD works fine

- The headphone level is perfectly ok and the little black knob is in its usual position.

- I tried reinstalling the latest drivers, rebootet, etc..

- The guitar is a Variax connected digitally to the POD.

- I checked all the Asio driver setting and couldn't find anything unusual.

POD Firmware is 1.12, Drivers are 3.4.3.1 (tried 3.4.3.6 also)

I am kind of desperate, since I cannot do any recording properly.

Any ideas?

Hermann

How can I control 2 PODs with 1 floor board?

support@line6.com — Mon, 29 Jun 2009 07:24:50 GMT

Hello,

I have a POD 2.0 and a PODPRO. I also have the Floor board and the 4 switch floor board.

However, I would like to able cycle through Banks and Channels for both PODs using a single floor boad control.

Any info would be greatly appreciated

POD Studio UX2 drivers - ASIO vs WDM question

support@line6.com — Sun, 28 Jun 2009 18:15:05 GMT

I recently purchaced my first Line 6 product, the POD Studio UX2. My current recording set-up includes: a Dell running XP (SP2) / M-Audio Delta 1010 / Sonar 5. I have spent many hours over the last few days trying to get everthing working together and my question is about UX2 drivers.

Here is a description of what I have figured out so far:

When I have the driver mode in Sonar set to ASIO I can enable the drivers for 1 sound card at a time. As a result I can use either the Delta 1010 OR the UX2 but not at the same time. In this configuration (i.e., the UX2 using ASIO drivers) the UX2 will record with a bit depth of 24 and it supports a sample rate of 48000hz.

When I have the driver mode in Sonar set to WDM, I can enable both the Delta 1010 AND the UX2 but when I do this, the whole project is reset to a sample rate of 44100Hz.

My question is this:

Do the WDM drivers for the for the UX2 support a sample rate of 44100Hz? I am assuming they do and I am just missing something obvious.

Thanks in advance for any help,

Dave

POD XT - Lack of bass

support@line6.com — Tue, 25 Aug 2009 19:37:59 GMT

I recently bought myself a new amplifier, the VOX AC4TV, since I wanted to add a bit of tube creaminess to my POD XT.

However, I stumbled upon a problem almost immediately...

When running the guitar through the POD XT to the amplifier I lose a serious amount of bass power compared to connecting directly to the amp.

Using my old amplifier, the transistor based Hüghes & Kettner Edition Blonde, I have no such problem at all. In fact there can be a bit too much bass, but that's just the voice of the amplifier.

I've tried using the built in EQ to correct things, but to no avail. Even at +12,6dB at 100Hz there's a serious lack of bass. In fact there's not much difference at all from the default flat value, not at all close to 12dB.

By the way, I'm using the Studio Direct setting in the POD, since the other settings just scream of digital distortion regardless of the amp I'm connecting to.

What I would like to know is this:

Is this a compatibility issue between the output impedance on the POD XT and the input sensitivity on the VOX AC4TV?

If so, is there any way at all to fix it?

POD XT Live, No Power

support@line6.com — Thu, 02 Jul 2009 00:49:51 GMT

I recently sent in my Pod XT Live to be repaired (I got both menu selection knobs replaced). I recieved the unit back, it worked for a day, and now it will not power on. When I plug it in, the only sign of life is the LCD display's back light comes on. There is no text, just the backlight. Any ideas?

Model packs in standalone mode for POD xtPro

support@line6.com — Thu, 12 Nov 2009 22:01:32 GMT

Hi there,

I have a question about POD xt Pro and model packs. At this time I'm using a UX1 with metal shop and PodFarm. I'm looking forward to buy a rack gear for using it as amp on stage or on studio without the need of my laptop.

The point is : if I buy a POD Xt Pro and I register the metal shop for using with it in my Line6 account, will I be able to shape a sound with Podfarm on my laptop (like a Deity), load it into my POD xtPro and use it on stage without the need of the computer ? I mean, does the POD xtPro work as a standalone unit as soon as the concerned liscences are registered on my Line6 account ?

Second thing : I red nowhere POD xtPro can manage dualtone feature. If I create a dualtone preset using PodFarm on my laptop, will I be able to load it in my xt Pro for a standalone use ?

(for "standalone use" I mean using the POD xtPro as a preamp in front of a poweramp on stage or into the mixing desk on studio)

Thanks guys, I like the POD X3 but I've already my metalshop and I don't want it to be useless...

syel1984@live.fr

HARDWARE WILL NOT START (CODE 10)

support@line6.com — Tue, 18 Aug 2009 00:42:30 GMT

I cannot install the drivers for my BASS POD XT Live. I am running XP and have installed Monkey, but I cannot install the driver v3.4.1.0 without getting this message.

Model Pack Bass Expansion : Patch not working ?

support@line6.com — Mon, 27 Jul 2009 08:39:05 GMT

Hi,

Been a long time that I didn't asked for support there ... ^^

Actually, I just bought the Bass Expansion for my Pod Xt and I'm experiencing problems with tones :

- Tones that I'm downloading for Bass Pod Xt from Custom Tone are not working.

- Factory bundle from Custom Tone for Bass Pod Xt is not working

(http://line6.com/customtone/packs/BassPODxt214.l6b)

- Seems just Bass Tones from the Line 6 Tone Collection File bundle are working ...

(http://line6.com/customtone/packs/GuitarModelPacksCollection214.l6c)

Is there an incompatibility between Bass Pod Tones and Pod Xt with Bass Expansion Tones ? (Sounds weird to say ...)

If it's the case - assuming the fact that this pack cost 100$ - is there a way to share / get tones from the community on the Custom Tone website for this modelpack or am I 'alone' with just the tones integrated to the Tone Collection File ?

Last but not the least, is there another place than Custom Tone we're I can find Bass bundles for Pod Xt with Bass Expansion ?

Hope you guys will be able to help me ^^

Best Regards,

Warfare

Line 6 POD 2.0 Weird Sounds

support@line6.com — Mon, 23 Mar 2009 16:22:47 GMT

Hi! Im having these weird sounds coming from my Pod 2.0. When I turn it on, it starts to swish or something. I dont really know the word, but something like swish. Turning the volume down doesnt help it at all. It overrides the Pod 2.0 sounds. I hope you can help me with this cause I really like Line 6 products and I would like to make it work again.

Sincerely

Tuukka Kolkka

change owner registration

support@line6.com — Fri, 23 Oct 2009 23:16:44 GMT

can I change my owner registration? I had an open ticket but ran into some issues at home and it was closed.

I have a reciept that I can send you in .pdf. The old ticket was 94771.

Cannot rename patch using FBV Shortboard / PodXT

support@line6.com — Fri, 03 Jul 2009 02:21:23 GMT

Hi folks, I am trying for the first time to rename a patch name using the FBV shortboard connected to the POD XT. The XT manual says to hold down the COMP button on the FBV until Name Edit displays. I do this and NAME EDIT comes up on the FBV display, but I assumed it would then show the patch name so I could use the cursors etc. But NAME EDIT just stays there (on the shortboard) and I cannot see any cursor or name characters to edit.

If I check the POD XT display the patch name and cursor are visible and using the cursor and character selection buttons on the FBV I can change the name normally. But surely I could do this on the FBV shortboard without having to refer back to the POD XT display?

Everything else seems to work on the FBV, if I press a channel button it will save the patch name to that channel and any editing I have done with help of the POD XT display will be saved, and operation resumes normally. If I push Tap it cancels. All buttons and rocker pedal work.

Is this behaviour normal? Thanks for any advice.

Using Bass PODxt Live as midi foot controller with Ableton...

support@line6.com — Tue, 04 Aug 2009 08:17:32 GMT

Hi there...I'm attempting to use my Bass PODxt Live as a midi foot controller linked directly to my mac via USB and using Ableton 6. I installed the monkey...but am finding myself quite confused about how to get the two to interact so as to produce the end product i am after (which is hands-free control of ableton's clips and scenes). I'm wondering if there's some resource out there specifically addressing this...or maybe someone who has done this that I can ask a few more detailed questions to? Incredibly grateful for any advice anyone can offer me with this one!

registration problems.......

support@line6.com — Sat, 25 Jul 2009 04:05:18 GMT

G'day guys ,how are we???

I purchaced a pd xt pro online about 12 months ago and I was unable to register it online because it was registered in another name. The only form of reciept I have is the persons username and and the bpay transaction from the purchace. The sellers name was Adam A Ederbach and I have the serial number of the pod. Can Iregister this item????????? Please help so I can use the online functions that I am missing out on.

look forward to your reply

Cheers Pat Mclister

Line 6 Edit won't run due to Java

support@line6.com — Sat, 10 Oct 2009 15:32:49 GMT

I have Java 6 update 16 (latest) on my computer. Line 6 Edit won't start and tells me "Could not find valid Java runtime!". Any idea why and what I need to do to fix it?

No Device Detected - POD xt

support@line6.com — Wed, 19 Aug 2009 13:12:58 GMT

Hi I've got the PODxt and the Bass PODxt and since I downloaded POD Farm I can't get my PODxt detected, now even by Line 6 Monkey! I've even tried the same USB and the same cable as my Bass PODxt which is detected with no issue, can you please help as this is extremely annoying and I can't get any work done because of it,

Cheers,

Dave

PODxt LIVE & stereo delay

support@line6.com — Tue, 30 Jun 2009 01:18:59 GMT

Hello,

I'm trying to find a way to use Stereo Delay of 20-30ms as my main sound, but with tap tempo, so I can have longer delays for solos, and then after the solo just re-select my preset to get back to the 20-30ms. The problem is, I cannot get the tap tempo to get anywhere near as quick as 20-30ms; and if I use the delay's 'Time' instead of 'Tap Tempo' option, I will not be able to tap-tempo-extend the delay for solos.

Is there a way around this?

Thanks! - Dan

The POD mounting bracket screws

support@line6.com — Sat, 09 May 2009 02:28:31 GMT

The POD mounting bracket description mentions screwing the bracket to the POD. What size and length screws should be used, before I screw something through something that shouldn't be screwed through, if you get my meaning? Also, is there a carrying case for the POD 2.0?

"Cannot lock to input" message although I am connected by S/PDIF

support@line6.com — Thu, 19 Mar 2009 02:32:45 GMT

I am trying to connect to my MOTU traveler interface via S/PDIF, but can't seem to get any input signal to it. Under the I/O & Dig select menu I chose to match S/PDIF in, but when I press it twice for the "what are you connecting to?" screen, it does not let me choose anything other than studio direct, and there is no option for fx loop or digout. Dest is all that appears but I can't change it. My MOTU interface appears to be set up and working properly. Any help would be greatly appreciated.

Hardware registration.

support@line6.com — Mon, 02 Nov 2009 14:44:17 GMT

Hi, my name is Ricardo and I bought a POD xt pro from a fellow on a online forum. I'm having some trouble into contact him so he can 'unregister' the pod so I can register it to my profile.

Is there anything that you guys can do?

Thanks

Amazing Service, Line6 UK

support@line6.com — Thu, 18 Jun 2009 10:57:50 GMT

I just thought I'd post this, as even a forum regular like me, suggests to many people to get their hardware serviced, but hadn't actually had any experience of service from line6 until a few weeks ago.

I've had my X3L in for the USB drop out, which took juat under a week... which when you think 2 of the 5 working days were shipping it there and back... so a 3 day turn around was really good I think. also it's a real personal service. the engineer even called me to say he was shipping it back, but they couldn't do my footswitch mod at the same time because the footswitch stock was late coming in...

so I waited a few weeks called back to book it in again, and it was returned within 2 working days... I'm not sure how they were able to manage it so fast with the shipping back and forth, which should have taken 2 working days without any time to fix it... but I'm well chuffed... although I've not tested it after this last service, I can't imagine there'll be anything wrong... their first repair left not a single mark on the POD, and it was well packed for the return, etc.

well done line6... 2 service trips, both faster than I expected (one faster than should be humanly possible) and all it took was a couple of short phone calls, and line6 organised the rest...

now that's what I call service!

thanks Line6

p.s. has anyone else had a really good experience like this??

FBV channel change resetting PODxt

support@line6.com — Tue, 06 Oct 2009 06:59:56 GMT

Hi,

I have recently purchased POD xt and FBV on eBay. I connected to Line6 SW sites through Line6 Monkey and updated the firmware, drivers and Line6 Edit, GearBox. I also installed the POD Farm, which I got with my (new) POD Studio. I arranged some sounds and stored uploaded them to my XT. All without a FBV pedal connected.

Yesterday we had a rehearsal with the band and I connected the FBV (a shielded CAT5 cable)

It worked fine for about 2 hours but then, when I tried to switch from ch. C to ch. B, the POD reset. First I thought it was an electricity problem, but then I found out, that it is a FBV problem, since whenever I tried to switch channel, POD reset. Changing banks worked, but changing channels did not. As far as I remember now, all switches worked OK, only channels did not.

Then I unplugged the FBV and tried to change banks and channels on POD. Worked OK. Switched FBV back on, Reset.

I unplugged the electricity from POD and left it for a while. Plugged back the electric cable, hooked up the FBV, ... worked OK for about 5 min. and then started resetting again.

Any advice? Can I solve the problem by changing the cable? Take FBV to service center? Buy a cable from LINE6?

Thanks for your help, Tom

XT Live wah pedal switch hard to push..

support@line6.com — Sun, 11 Oct 2009 19:18:17 GMT

Hi,

Just got myself an XT Live, and I'm finding the toe switch REALLY hard to activate. I tend to play sitting down mostly, and I have to stand up and apply a lot of pressure on the switch to get things going.

Is there anything I can do, ie mods etc, to make things a little easier to use?

Thanks,

Test your ears: PodXT or Roland COSM/AdrenaLinn combo? ANSWERED!!

support@line6.com — Fri, 28 Aug 2009 04:37:37 GMT

I just added 2 new songs to my music website: "What You Want" is the song on top, and "Half Truth" is the next song down. One song has a simultaneous combo of Roland COSM amp model and AdrenaLinn amp model & effects on the guitar(s), and the other song has all PodXT on the guitar(s). One song has Bass Pod(non XT) on the electric bass, and the other song has Bass PodXT on the electric bass. Your goal is to figure out which devices go with which songs. Whoever gets the most correct gets this months virtual Golden Ear Award. Please tell me how you like these songs and how they can be improved. Here is the link:

http://www.soundclick.com/bands/default.cfm?bandID=224436

BASSPOD LIVE XT AND RIFFWORKS

support@line6.com — Wed, 28 Oct 2009 04:41:01 GMT

ARE THERE ANY BASSIST OUT THERE THAT HAVE BEEN DARING ENOUGH TO TRY RIFFWORKS WITH Basspod live xt? or any recording enthusiasts? Considering purchaseing for quick recording. Please advise.

a bit lost on how to get patches

support@line6.com — Sat, 02 May 2009 07:37:54 GMT

New owner of a 2.0 POD here & am still groping my way around using it.

I've seen a few patches I'd like to download & use for it, but am in the dark as to how.

Would I need one of these?:

http://www.synthtopia.com/content/wp-content/uploads/2007/07/usb-midi-cable.jpg

If so, then what?

Thanks for any help.

Bass PODxt no will no longer power up after doing flash upgrade

support@line6.com — Tue, 16 Jun 2009 00:02:37 GMT

Apologies for duplicating this message, but I just realised I did not mark it as a question.

I recently bought a Bass PODxt second hand.

The initial problem was that none of the front panel buttons were responding - everything else seemed to be working okay.

Then the buttons suddenly started working .... then not working .... then working again etc. etc..

As I already own (and have registered) a Bass PODxt live, I hooked up the Bass PODxt to my PC USB.

Now, using Line6 monkey, I connected to the Bass PODxt and re-loaded it with flash version 1.04 (which it already had).

Followed the instructions to power off - the power on again.

The unit no longer boots up - error code #01.

I can still see the status in the Line6 monkey ... so I try re-flashing it again.

Now, after powering off and on again, the unit just keeps going throgh the following cycle :-

LCD back-light comes on

After 1-2 seconds the SAVE, MOD, DELAY/VERB and CAB/A..I.R. buttons light for about 0.5 seconds.

Then they go very dim for about 3 seconds.

Then off for about 0.5 seconds.

Process now keeps repeating.

I did not have this product registered when I tried to re-flash it (only the Bass PODxt live is registered to me) - could this have caused my problem ?

Is it fixable without sending it to authorised repair centre.

Or should I return it to the person I bought it from (although this may be difficult as it now has a different fault to the original "buttons not responding" problem.

Any help would be fantastic thanks.

PodXT - Recording via USB in Sonar creates a staticy wave

support@line6.com — Tue, 30 Jun 2009 05:28:56 GMT

I'm trying to explore the option of using the usb output on the podXt to record a dry track while recording a wet track from the analog outs. To start I'm just trying to record 1 clean track from the USB, not a simultaneous recording. When I do this in sonar 8, as the wave is recording the waveform looks normal and healthy. As soon as I stop the recording, the wave form changes to a solid bar. When I play it back, it's mostly really loud static with a hint of guitar in the distance. Looking at the wave in an editor confirms that it's the wave file itself that is somehow corrupting. I've tried setting the output of the podXT to 48khz (what I'm recording with in sonar) and it didn't make a difference. I'm using WDM drivers in sonar. Any ideas what could be causing this?

Pod Xt

support@line6.com — Sun, 01 Nov 2009 15:31:11 GMT

I purchased a POD xt on ebay and I am trying to register the unit but it is still registered to the former owner...I am not sure if I can still reach this person. What do I do?

Thanks for your help,

Eddie

pod x3 live

support@line6.com — Sat, 12 Sep 2009 22:36:12 GMT

is the pod x3 live any good people say it drops to bits can someone tell me if this is true

Pod 2.0 Limited Edition

support@line6.com — Fri, 30 Oct 2009 14:38:41 GMT

How many of the Pod 2.0 Limited Edition (chrome) units were made? Other than the finish, is there anything else unique about them?

POD X3 Live - Scrolling through presets by itself

support@line6.com — Tue, 13 Oct 2009 07:21:47 GMT

I just recently got my POD X3 back from repairs now everytime I'm playing a song the pod just scrolls through all the presets and keeps on going over and over again eg:

1A 2A 3A 4A etc etc

How do I fix this problem?

pod xt 1 mono pa speaker?

support@line6.com — Tue, 13 Oct 2009 00:52:19 GMT

this post is elsewhere. i was hoping to email line6 but i'll post this here:

hi,

i have had my pod running straight into a 15" pa speaker with no amp inbetween. the signal is coming from the headphone socket. i use it for low volume practice. the speaker is 8 ohm. am i ok to do this?

the signal from the other outputs is not powerful enough. i currantly have a mono cable from the headphone socket to the pa speaker is this a normal mono signal in this case? thanks.

Wah and Dumble

support@line6.com — Sat, 14 Nov 2009 15:03:55 GMT

Hi, I have a Pod xt Live and have two questions. I can't seem to get the wah to work correctly. Once it is engaged the pedal will not go on and off when pressed. Secondly how can I download the Line6 Boutique 1 amp which is the Dumble? Thanks, Joe

Which comes first in the pedal chain?

support@line6.com — Mon, 31 Aug 2009 23:41:10 GMT

Okay...newbie question here that I haven't found an answer too yet..so be gentle: I have a Line 6 POD, and just purchased the ToneCore Echo Park. Intuition tells me I should connect guitar to Line 6 POD, then out of the POD and into the Echo Park, but I want to make sure. Educate me please.

bill

POD Studio KB37 Model Pack

support@line6.com — Fri, 30 Oct 2009 14:58:24 GMT

Hello!!

I have a POD XT LIVE with FX Junkie Model Pack + Metal Model Pack and i am thinking to buy a POD Studio KB37.

My Question is....it is possible to get the Metal Model Pack in POD Studio KB37 since i already bui it to POD XT Live??

Than You.

Best Regards.

Nuno Pinto.

Unable to Download Java Runtime Environment

support@line6.com — Tue, 27 Oct 2009 23:18:36 GMT

I just re-installed Line 6 Edit on my new PC and I get the error message 'Unable to download Java Runtime Environment' Can you help?

Greg

Podfarm cant find my PODxt as plugin with PTLE7.4

support@line6.com — Sun, 01 Nov 2009 19:29:32 GMT

I know that podfarm can only be used as a plug-in with the podxt, but when i open a session and check podfarm as a insert,

it tells me that its no authorized device connected. When thats being said, i cant go into preferences in podfarm and change to the podxt cause of its plug-in interface.

My pod is up-to-date with the monkey program, and shouldnt have this problem.

I also want to mention the gearbox crash PTLE when i record enable the audio track, but as standalone it works perfectly.

I rather not use a cable from my POD to the mbox2, cause the soundquality gets noticeable worse

Pocket POD & Line 6 Monkey

support@line6.com — Tue, 21 Jul 2009 14:31:14 GMT

Dear Line6 support:

Pocket POD In-Depth Reference Manual (Rev A), page 1-5:

You’ll also want to visit www.line6.com/monkey to get Line 6 Monkey, the free intelligent software update utility that makes it easy to get the latest firmware updates for your Pocket POD. [...] Once you’ve got Line 6 Monkey, run it and follow Monkey’s lead to get any available updates for your Pocket POD.

The current version of Line 6 Monkey (version 1.27) does not support Pocket POD. When is the release of a version that supports it?

Further, what is the target date for the release of the announce firmware update for the Pocket POD?

Many thanks in advance!

-- Martin

attempting to download monkey

support@line6.com — Tue, 17 Mar 2009 02:24:23 GMT

I've owned the xt live for a while and just got around to attempting to download a few custom tones. After choosing pod xt live under the product menu, am I to download drivers under the software menu before installing line 6 monkey or are the necessary drivers included in monkey? Thanks for the help.

Factory Settings on a PodXT Pro with a MAC

support@line6.com — Wed, 06 May 2009 05:16:31 GMT

Can't find anything to help me out on this one. I've tried to follow the direction posted in regards to Windows, but it didn't work. I just want to reset my PodXT Pro to the factory settings, I'm using an iMac, everything is up to date and the PodXT Pro is communicating with my computer just fine...I can't figure out why it won't work (resetting, the thing works fine but there's a load of the previous users presets I just don't want). Can anyone help me out? Thank you in advance.

USB connection?

support@line6.com — Wed, 08 Jul 2009 00:04:26 GMT

Greetings,

I have purchased a "Bass Pod XT Live" and am trying to use the "LIne 6 Edit" software to work with the tones.

Can't get it to set the device. I registered it and used "Line Monkey" to check all the drivers etc. I also have a "POD X3 Live" and use "Gear Box" without any problems at all.

I am using a Mac running the latest version of Leopard.

The only thing I get with the "Edit" software is the unit with a "USB" and a "Question Mark".

Reset everything to factory settings thinking maybe something was redirected in the unit with no luck.

Your products (I am expecting a new Variax 700 tomorrow) are great but I am stumped.

Help?

Dr. C. David White

Why can't we buy an interface like that, for Pocket POD, from Line 6????????

support@line6.com — Wed, 29 Apr 2009 22:26:21 GMT

http://www.youtube.com/watch?v=2sDm5nYn4kA&feature=channel

???

Podxt(L) powers up but will not work.

support@line6.com — Sun, 16 Aug 2009 12:42:46 GMT

I have a PODXT(L) that powers up but doesn't work. I only get the STOMP, MOD and AMP lights to light up and the orange display that only lights up but there is no writing on the screen. I've can't even do the reflash procedure because the flash icon in Monkey isn't clickable, just grayed out. I've done a search on this and the only comparable problem that I've seen resulted in a "send it in for service" recommendation. Is that what I need to do?

Thanks in advance.

Pod xt live very quiet

support@line6.com — Wed, 20 May 2009 05:56:57 GMT

yesterday my pod xt live worked great now when i plug my guitar or computer into i have to turn my amp all the way up and put my ear to the speaker just to faintly hear what im trying to play. and i actually mean all the way up. i reinstalled everything off line 6 monkey but nothing worked. any suggesstions?!?

PodXTPro All Lights are Blinking and the Display is Blank

support@line6.com — Wed, 10 Jun 2009 19:56:17 GMT

HOw Does one create a support ticket So that The factory People answer??

Dear Support Group

I am using a PODXTPRO rackmount bought in Florida in 2004 it is a 110v Model and I am now using it to gig

in Lima Peru ( voltge is 220V/60Hz)

after my last jam The POD XTPRO panel started blinking on and off and the clip light is on permanently

as well other lights which just blink and wont let you change or hear anything.

Also the display just shows the background light with no text.

I might add that i am using a 110-220 Converter and Power stabilizer to clean
the supply.

Do you think I could fix this by changing the 110v to 240 V( 500ma SB fuse as well)?

I have been trying to do a *hard reset*the unit but unlike my GSP2102 by digitech
in PODXT you do need to have the LED screen up and runnin....

Do you know if there is a combination of buttons that could be pressed in conjunction
with the Power button on the PODXT to do a reset sort of speak?

I will await your advice

Regards

Omar Porto

resetting factory settings on pod xt

support@line6.com — Mon, 07 Sep 2009 21:12:40 GMT

Hi. I am having trouble resetting my pod xt to factory settings. I have followed the instructions in my manual but have no luck please could someone help.

MY POD XT LIVE IS FROZEN!

support@line6.com — Fri, 10 Jul 2009 00:37:22 GMT

I have a bass pod xt live which now does not work.

I have read all forums and non-one helped.

The window in my device does not show any words; it looks frozen.

When I open the Line 6 monkey the software recognizes my pod, I connected via a USB connection.

On the Updates tab, my Flash Memory is not install and a question mark is shown.

I try to reset it to factory mode but in order to do that I have to be able to read any instruction or any word in the window and it's just blank.

Every 10 sec the leds for the amp, stomp. mod, dly/vrb pedals start flashing continually and then stop.

Registro POD XT Live

support@line6.com — Sat, 31 Oct 2009 01:34:55 GMT

Compré el producto hace 2 años y quiero registralo ahora. Seguí las indicaciones pero no se registró. Aparece el siguiente mensaje.

There was an error processing your submission.
Serial #cannot be validated.

¿Como lo puedo registrar, si coloqué el serial correcto y la fecha en que lo compré en una tienda en Chile?

i need to know why i should keep my pod 2.0 after buying the spider jam and pedal .. is there any options to keep it

support@line6.com — Fri, 19 Jun 2009 22:37:09 GMT

I just bought a spider jam and have also purchased the short pedal .. now what do Ido with my pod 2.0 .. is there a reason to keep it and why .. please think about it before replying .. it is not about money but about sound

Thanks

Bluesman

FBV2 does'tn work

support@line6.com — Thu, 16 Jul 2009 14:11:34 GMT

Hi everybody,

I recently bought the FBV2 controller for my POD XT and as i can't find any discussions of my problem, even in older discussions, i decided to open a new discussion.

My problem is:

When i connect the FBV2 into my POD XT, it doesn't work, it can't change the presets between banks A to D or D to A, when i press the buttons. I changed the cable and keeps the problem. I don't know if i'm doing something wrong.

I'm using with my POD XT and the POD XT sometimes is conected in my Motu 8Pre interface and sometimes is conected with my amp and both cases the FBV2 doesn't work. The seller told me that he already contact someone at Line6 and someone said him that i have to programming something, so i would like your help.

Thank you.

Readyness for Windows 7/64 bits

support@line6.com — Sat, 12 Sep 2009 09:39:40 GMT

Hello,

I am a proud owner of a POD XT Live. Can you tell me if the driver and software are ready for Windows 7 in 64 bit mode ?

Thanks

Lucien

HOLD/TUNER light keeps blinking

support@line6.com — Thu, 06 Aug 2009 07:17:35 GMT

The foot switch light keeps blinking. Even After tuning the guitar the light continues to blink all the time.

What is the problem here ?

Pod xt

support@line6.com — Sat, 07 Nov 2009 15:29:39 GMT

Hi how can i tell what version my pod xt is please?

Trying to Get Validated Using Beta Drivers and 1.31 Monkey on OSX Snow Leopard

support@line6.com — Sun, 08 Nov 2009 04:46:32 GMT

I've gone through the validation sequence a couple of times.

1. I Press Activate Features. The progress seems to be normal.

2. The Turn Off/On device dialog appears.

3. I power off/on the PodXt

4. A Transaction Complete Dialog appears, and I press the OK button.

5. A dialog appears that says

"Warning: The transaction verification failed."

The problem is persisting so I'm contacting support as directed. Thanks.

Sound Problem With UX1

support@line6.com — Mon, 07 Sep 2009 19:10:56 GMT

Hello,

My Problem with the UX1 is, that if it is connected to my MacBook Pro 17* the sound that i hear out of the UX1 is very crunchy. I mean it is just not clean... something like krrrkkrkrkkkrkrkkkrrrrkrkrk.

Sometimes when i restart my machine it's proper again...

Is there a special driver i should install (i installed the newest available on your site some minutes ago)...

thanks for your help

nicolas

Pod XT as MIDI controller - not passing notes

support@line6.com — Tue, 24 Mar 2009 09:14:21 GMT

Hey there,

I was hoping to use my Pod XT as a MIDI device on my laptop. I've got my FCB1010 programmed to send NOTE data but it doesn't seem to be getting through. Midi Ox shows CCs and PCs coming through but not notes. I can also control the Pod itself directly using the FCB, just as I would expect.

Setting MIDI channel to 1-16 or OMNI has the expected effect but notes still don't get through. Also, neither setting for MIDI Output, Thru or Output, has passed notes. I've double checked the FCB with another MIDI device to verify the data is being sent.

Has anyone else got experience with using the Pod as a MIDI device with Live, Reason, etc, and had success passing notes?

Thanks!

Tom

is the fbv express compatable with pod 2.0

support@line6.com — Mon, 04 May 2009 20:55:45 GMT

is the fbv express compatable with pod 2.0?

How do I rid of this loud squeak (mechanical sound) from my POD XT Live pedal???

support@line6.com — Tue, 07 Apr 2009 18:29:47 GMT

I took it in to a local authorized line 6 repair shop to get it fixed. Line 6 was kind enough to authorize the repair even though my unit is out of warranty. It started squeaking again in a couple of days after I took it home. I contacted the repair facility and they said they performed the recommended factory fix and I should contact line 6 again. Line 6 responded by stating my unit is out of warranty. WTF?? I just want to use my pedal without the SQUEAK! HELP!

Community : Popular Threads - POD, Pocket POD, PODxt Family, FloorPODs, Bass PODs

MAC OSX 10.6 Snow Leopard x86 & Line6 Edit for PODxt Pro

Windows 7 64bit

Pod XT Live Expression Pedal Failure

Recording vids directly to PC using Mic or USB plug

Line 6 Edit Errors and Crashes

forgot password, deleted email.

Getting hum when I plug my usb cable into my computer.

Recording Music

Pocket Pod Footswitch! Anyone know what this is?

Pod 2.0 to laptop connection freak-out and frustration!

POD 2

Upgrade not working properly

New to Line 6....Need Help!

Monkey doesn't show Pocket POD 1.01 flash update

IRELAND + UK Power Supply for POD 2.0

Pocket POD registered to my Account - Line6 Monkey says it is not.

I've switched my email addres...

Pod XT ASIO drivers stop working in Cubase

Is there a video anywhere that shows how to navigate the buttons on my pocket pod

I have just downloaded Edit but it will not work.

Free Pod Farm Plug-in for PODxt Pro owners?

AUX input on floor pod plus

More Line 6 edit Java Problems....

E-prom chip for pod

Windows Vista 64 bit problems with ASIO Pod XT

update usb firmware pod xt from 1.01 without MIDI USB interface?

Line 6 pocket pod, something doesn't work

Second-hand PODxt Live Registration

help request

Pocket POD: Is Cabinet Tuning of Amp Out jack Independent of Direct Out/Phones jack?

PODxt Soundcard Problem

windows 7 compatability with podxt live, variax, workbench

About Recording of Pocket Pod

Permanently saving a custom tone to my Pocket Pod

Phaser effect in POD XT live

Substitute for Line 6 EX1 Expression Pedal

Bass pod

XT Live driver installation problem

re: Pod XT Live and installing line 6 edit

PodXT not connecting on OS X via USB

Bass pod pro

Cannot register my PODxt

Bass Pod xt live warranty question

Can't register my used PodXT Live...

Bass PodXT Midi Timeout

No me funcionan los models packs en el POD FARM con mi POD XT Pro

problems with FBV Shortboard recognition, and older product registration

POD 2.0 and PODxt are the

Ran Line6 Monkey on new computer, now the Metal pack add-on is gone from my PODxt.

Line 6 Edit Problem

Pod 2 audio cuts out when in A.I.R. amp mode

Reamping issues W/ PodXT Pro

how to upgrade pod 1.x to 2.0?

Already registered?

pod farm + podxt pro + win 7 64bit

have some problem

Connecting POD 2.0 to the computer

Bass PODxt Pro as an FX looped device

Greetings...

PODX3Live

pod xt factory reset

De-Register problem

probleme maj

Where is the Bassamps located in my POD xt LIVE?

pod xt pro 4 buttons innoperante

PodXT USB Firmware Update

Pod XT Live into Engl Invader 150

How do I Register a second hand POD 2.0

Blank Yellow Screen....most times

PODxt Flash Memory Installed Version Listed as "-" in Monkey

registro de usuario

Error in reactivating

Trouble with POD 2.0 MIDI connection...

win7 support

Problems with Download Java Runtime Environment for Line 6 Edit v 3.02

Im not receiving password resets!!

Original Bass Pod

Need help to register a used PODXT Live

POD xt shows: USB: 0.00 ???