Community : Popular Threads - POD Farm / POD Studio / TonePort

Line 6 device and AMD Turion X2 Mobile Processors Investigation

support@line6.com — Tue, 23 Jun 2009 18:44:45 GMT

Guys,

I'd like anyone who is having issues with pops and clicks with these sepcific processors and our drivers to please post on this thread EXACT computer specs and a concise and detailed recipe of how you are able to reproduce these pops and clicks.

I've been streaming music now on an HP DV9 laptop with an AMD Turion 64 X2 Mobile processor on Vista Home Basic 32 bit now for about an hour without one pop, click or CPU spike. Help me reproduce this so I can help you guys get up and running! Thanks.

Line6Miller

Pod farm

support@line6.com — Fri, 20 Nov 2009 01:30:21 GMT

I bought a freakin pod farm, and it demanded an ilok, then I bought an ilok and it would not work with reaper, I am ****** off! How much crap do I need to go through to get this piece of **** pod farm working on my computer????????

Jesus ******* christ

Crackling in monitors, using Toneport UX1

support@line6.com — Sun, 08 Nov 2009 02:26:48 GMT

I've tried the recommendations that have already been posted, including optimizing my computer settings, downloading the latest drivers and software versions, and trying different settings for buffer size, bitrate, and so on. I've checked all the hardware (monitors are brand new, cables are new/not damaged). My computer should be plenty fast enough (and when I'm not using monitors, it handles the recording software fine, with processing and memory to spare). So I've kind of reached my wits end...I just spent a bunch of money on these monitors and I can't hear anything but crackling static.

Hardware:

Laptop (Windows Vista, 64bit, 2.10GHz, 4.0GB RAM)

Toneport UX1 (connected by USB 2.0)
M-Audio Studio Monitors (connected by two 1/4" cables to Output from Toneport)

Guitar or Amp (into 1/4" Instrument input on Toneport)

Software:

Line6 Gearbox (usually set on bypass, if I'm recording direct from an amp)

Ableton LiveLite 7.0

POD farm vs Guitar port

support@line6.com — Tue, 10 Nov 2009 03:21:04 GMT

Trying to decide which to purchase. Basically a beginner and just want to record some rhythm tracks and play lead over. Maybe send a file or CD to friends to listen to if I get something that sounds good. Also interested in software to assist with learning the fretboard and maybe has some exercises to improve rhythm, timing, etc.

Pops & clicks issue

support@line6.com — Wed, 11 Nov 2009 19:54:49 GMT

Hello,

i'm unlucky to experience the TonePort pops & clicks issue.

I've been said to start a new topic and post my pc's specs, so it could help.

So:

ASUS k50AB (notebook)

Windows XP SP3, 32-bit, slightly modified (just for the looks +few program installed, not important)

AMD ATHLON X2 QL-64 (2.10 GHz, 1MB cache)

4 GB RAM (Windows reads only 3,25 GB because it's an XP, still)

ATI Radeon 4570 (i doubt that's important, but whatever)

250 GB HDD

WiFi IEEE 802.11b/g/n
LAN 100 Mbps

So you can see i experience the common noise problem on Windows XP and having an Athlon, not Turion.

I've got TonePort UX1.

None of the solutions posted helped.

Please do something, i hope you guys will be able to fix this.

Sidus

Sound suddenly choppy/distorted

support@line6.com — Mon, 16 Mar 2009 18:28:02 GMT

Hey Guys,

Got my Toneport UX2 running through my Mac via USB, and have the main audio running out of that to monitors. When using it sometimes, the audio suddenly becomes choppy and distorted, almost at a rate of 1 'blip' per second. I restart the mac and everything is fine again until it happens. What is going on??

Macbook 2.4ghz 4gb Ram 160GB Hard drive

Thanks!

TonePort DI-S No Sound

support@line6.com — Fri, 20 Nov 2009 20:51:23 GMT

I just received my TonePort DI-S from my GuitarPort bundle. I installed all of the software. I have the TonePort plugged in. I have a green light. I have re-installed drives more than once. I have restarted the computer more than once. I have switched USB port, computer front panel not a hub. I have all of the up to date Drivers, USB, Gear Box, etc.

I am getting no sound through my computer speakers from the Guitar. I see needles moving on Gear Box. I have twisted knobs, pushed buttons, tried combinations of things. I can hear the video tutorials played from the embedded browser at the bottom of gear box just fine.

I know there is something super simple that I am not seeing here. Why can't I hear my guitar played through my PC speakers?

thanks

koolaide

High pitched whine

support@line6.com — Thu, 05 Nov 2009 02:29:17 GMT

While recording a kawai k5000 I get a high pitched whine this also happens if I even turn on gearbox or podfarm. So far I have tried 2 different computers, running the laptop off battery power, switching outlets, switching the power cord on the Kawai, using all ports on ux8, switching the ux8 and k5000 to different outlets, using new audio cables and using a new usb cable on the ux8.

Some strange details: usually I run things through a mixer and effects before going into the ux8, even with the voulme down to 0 on everything the whine perists. Plugging the audio cable from the k5000 1/4 of the way into the mixer and there is no whine, but I can't change the volume! It's only the k5000 that is doing it. The whine is there even with the k5000 off, but goes away if it is unplugged. I tried using a behringer ufo interface and it is fine, plugging straight into the onboard sound card it is fine, plugng right into a zoom h4n it is fine as well. In some ways it seems like a k5000 problem, but all other recording interfaces have no whine.

Any other ideas?

Thanks.

UX1 MIC INPUT NOISE

support@line6.com — Tue, 17 Nov 2009 04:27:11 GMT

Hello

My MIC entrance in my UX1 makes a lot of noise for itself, even if i have nothing plugged to it!!

Here are the printscreens (again, nothing plugged into MIC)... the noise is, as you can imagine, quite a lot, especially because the only way of hearing myself decenlty without licking the microfone is pushing up the gain up to almost 10dB.

0dB - 7dB - 8dB - 9dB - 10dB -

Please note the noise is independant from the setup i choose, it appears in the dry input as you can see. My guitar input works perfeclty, without any noise, wich makes this even stranger

How do i get my Pod XT Live to work with Pod Farm?

support@line6.com — Wed, 11 Nov 2009 15:27:38 GMT

I have a xt live and i really wanna get it to work with pod farm so i can record stuff with garageband. I have connected my xt live to my com, updated everything possible through monkey. I opened pod farm and it said no compatible devices detected. So now what?

Direct Monitoring Problem

support@line6.com — Mon, 16 Nov 2009 16:11:50 GMT

I am unable to enable "direct monitoring" in cubase. I have only acquired the PODFarm plugin recently so I didn't notice this before. This was happening under cubase 3 sx and now under 5. All steinberg has to say about it is the driver doesn't support it. This is highly frustrating! I have reinstalled all line6 software/drivers and the cubase 5 is a fresh install.

Any ideas?

kb37 as a real sound card

support@line6.com — Sat, 07 Nov 2009 19:55:25 GMT

so your telling us that we have to use the pod farm or some audio software to hear the line inputs on the kb37? this again is misleading in your advertising. and if I use podfarm I am getting distortion on the line in even when I delete all amps and other devices from the podfarm audio chain. I also don't get a dry channel it still runs through the amps or whatever else is in the audio chain. also I am using the line 1 and 2 inputs, why am I getting audio on the 3 and 4? I am not using an spdif input????

Pod Studio UX1 Not Working With Windows 7

support@line6.com — Thu, 19 Nov 2009 18:10:28 GMT

Greetings,

I've gone through all of the support FAQs/discussions so this is a last-ditch attempt. I am getting sporadic performance from the UX1 on my laptop (brand new, core i7 processor, Win7, 4g ram). Playback stutters, system sounds only happen sometimes (e.g. - running the "test" function on the sound devices control panel only plays sounds less than half the time) - thus I know it's not an issue with my DAW software. Following the manual and support FAQs, I have:

1. disabled antivirus

2. disabled all wireless/bluetooth network adapters

3. disabled the computer's sound card

4. adjusted sound settings (buffers, size, etc.)

Still, the stuttering problem when playing back and the sporadic appearance of system sounds persists. I have the latest Line6 drivers and software. Any other tips?

Thanks.

loud pop,scratch type, white noise on playback and record.

support@line6.com — Tue, 10 Nov 2009 23:25:11 GMT

I have contacted sonar support and have completed all of their trouble shooting steps. They say it must be my input device. I have tried switching over to my computers sound card and the noise does stop. I have updated all my drivers and have completely reinstalled my ux2 software. I have tried changing all my buffers, driver selection......nothing works. I have had it for over a year. Previously no issues. I have added no new hardware or software. What is going on? -thanks,

UX2 Crashes when receiving a powerful signal?

support@line6.com — Sat, 14 Nov 2009 16:06:58 GMT

I've had my UX2 crash on me three different ways, all related to high input levels, or so I believe.

Running a bass into the instrument input, had it turned up loud, needles were over on the right. The UX2 shut down. I unplugged/plugged it back in but Reaper wouldn't recognize it. Had to reboot everything. Creative inspiration killed instantly.

Running 2 mics into the UX2, setting levels on guitar amp. It was loud and the mic gain was up. The UX2 shut down, similar results.

Playing a mix back via Reaper, some of the levels were set high and before I could drop them, the UX2 shut down...

Is this supposed to happen when the UX2 receives too strong a signal or do I have a bad unit? I can't imagine that any level of audio input would physically damage the UX2.

Running Windows XP on a laptop, Reaper, POD Farm. This seems to happen intermittently...which makes me wonder if I have a bad piece of hardware (yet again).

UX8 turns on, cannot connect, and can't turn off

support@line6.com — Mon, 09 Nov 2009 06:17:47 GMT

Hello,

I have a UX8 that suddenly stopped working, when i pluged a guitar in INST, port 1

What happened, is that the UX suddenly froze, some clip lights were on, others were dim red, it simply felt like my system was twitching.

So i tried to turn it off, but it didnt work.

I unpluged it and when I pluged it back in and turned it on, the clip lights were going form left to right ( the two clip lights next to the meters were not on nor were they flashing).

and i cannot turn it off, so I have to unplug it again..

I thought it was a tough piece of hardware..

Can anybody please tell me what has gone wrong?

thanks!

Hiro

( Sorry for the double post)

Pod Farm Platinum + M-Audio profire 610

support@line6.com — Fri, 13 Nov 2009 11:43:04 GMT

Hello,

I have Pod Farm Platinum which was unlocked through my pod x3 live, working as a plugin in sonar/nuendo/cubase. I want to be able to use the plugin with my M-audio profire 610, without having to hook up the x3 live, (which i only use for amp situations). I travel a lot and I can't carry a lot of gear with me, so it would be very convenient for me to use pod farm platinum with my m-audio.

can you let me know how can i unlock it?

Awaiting your reply!

Alex

Can i monitor myself through speakers using Line 6 GX

support@line6.com — Mon, 16 Nov 2009 00:39:12 GMT

Hey,

I'm using an M Audio Fast track pro interface, to send my output signals to my monitors, however, i can't seem to find a way to do it, when using my Line 6 GX. Is there any possibility i could still use the Line 6, but use my m-audio interface, to carry on sending output signals to my speakers, so i don't constantly have to use headphones when i'm playing/recording guitar?

Cheers,

Will

how can i get a manual inspanish of my toneport ux1

support@line6.com — Tue, 17 Nov 2009 17:45:29 GMT

i need information in spanish for my toneport ux1,i use cubase thank

pod farm for x3 user (for use without x3)

support@line6.com — Thu, 19 Nov 2009 22:45:27 GMT

Hi..i have a question..i'm a pod X3 owner and i have the pod farm plug in that i use only with the pod x3 connected..is there a way to use pod farm without the pod x3 connected?i think that is necessary a new registration or i lok version,but what type of pod farm and what the price to have all the amps and stomp that i have in the pod x3?thank you very much and sorry for my bad english..

POD x3 Amp Emulations and Tones

support@line6.com — Sat, 14 Nov 2009 22:17:14 GMT

Does Line 6 have any plans to do emulations of the Randall T2/V2 amp heads or the Sound City 120 amp head? What are the closest amp emulations/tones on the POD x3 series that can be comparable to the Randall T2/V2 amp heads and Sound City 120 amp head? Any information that you can provide about this would be greatly appreciated.

POD Farm Plugin Audio Cuts In/Out When I Edit- But Works Otherwise???

support@line6.com — Tue, 17 Nov 2009 19:13:38 GMT

I have a registered POD XT Live, which I use (as a dongle, effectively) with the basic POD Farm, which was a free download in September. When I instantiate the plugin inside Cubase (4.52), all is well. The sound is fine and works as it should.

THE PROBLEM: When I open the POD Farm Plugin GUI to change an amp tone, or otherwise edit the sound, I get audio dropouts lasting several seconds at a whack, interspersed with an occasional (brief) bit of sound. It makes editing the tone virtually impossible. Once I close the GUI, the plugin works fine again.

THE SYSTEM: It's a Quad Core AMD 2.8 w 4 gigs of RAM. I have Guitar Rig 3 and a few other amp sims that work perfectly at the 256 buffer setting I use. The size of the project doesn't matter, I get this problem even if it's the only track in the project.I also have a UAD Duo and Liquid Mix, which both operate without issues. Bottom line is that the system is brutally powerful and this is the only glitch. I have uninstalled/reinstalled the POD Farm, as well as all of the other drivers.

I would really appreciate a fix for this, as I'm very pleased with the sound of the POD Farm and would like to be able to rely on it. As it sits, it's worthless. Please help.

Blue screen with POD Studio UX1

support@line6.com — Tue, 17 Nov 2009 11:52:45 GMT

Hi there,

Recently i'm on Windows 7 (Ultimate Version) and now I've got 'Blue screens" showing the following Stop Message :

L6UX1.SYS Address 9237B0B1 base at 9236A000, DateStamp 4a53c2b9

The first times, bluescreens appear while I was listening MP3 ine Windows media player, then in Winamp. My UX1 is my default sound material.

I had the bluescreen a few times when watching Videos on MPC Home Cinema and another time whereas I do nothing on my computer.

The message on bluescreen is always the same and showing an UX1 conflict. I think it can be an incompatibility problem with Win 7 and UX1 Driver. When I was on Wondows XP, I never had such problem.

Thank you for your help.

Intel E6600

Asus P5N 32-E SLI Plus

ATI Radeon 4870 1Go

4 Go RAM corsair.

DD maxtor 300 & 160 Go

Windows 7 intégrale.

French Version :

Bonjour,

Je suis récemment passé sous Windows 7 (version intégrale) et depuis, je rencontre un problème de type "écran bleu windows" (blue screen) m'affichant le stop message suivant : L6UX1.SYS Address 9237B0B1 base at 9236A000, DateStamp 4a53c2b9

Les premières fois le bluescreen est apparue durant l'écoute de MP3 sous Windows media player puis sous Winamp. A savoir que mon UX1 est mon périphérique audio par défaut.

J'ai rencontré le problème plusieurs fois en regardant une video avec MPC Home Cinema puis, à nouveau le même problème sans faire quoique ce soit.

L'erreure ne se produit pas intantanément et de façon aléatoire. Le message d'erreur du bluescreen étant toujours le même et indiquant le UX1 comme conflit, je soupçone un problème de compatibilité entre le Driver du UX1 et Windows 7. Je n'ai jamais eu de tels problèmes sous Windows XP.

Merci de bien vouloir m'aider à résoudre ce problème bien embettant.

Intel E6600

Asus P5N 32-E SLI Plus

ATI Radeon 4870 1Go

4 Go RAM corsair.

DD maxtor 300 & 160 Go

Windows 7 intégrale.

TonePort UX2 - Windows 7 / 64 bit

support@line6.com — Sun, 25 Oct 2009 14:28:33 GMT

Unfortunately I could not install the latest GearBox SW for TonePort UX2 on my new Laptop with Windows 7 operating system, 64 bit Version.

When will a suitable Upgrade SW Package be available?

Thanks in advance. Wilfried

pod farm

support@line6.com — Tue, 17 Nov 2009 13:06:52 GMT

Two weeks ago I purchased the line 6 ux 2 (the version with the gearbox.new version still unavailable in my country...). when I installed the gearbox it didn't work as a plug in and it told me to download the pod farm fron your website....It works only as a standalone and the plug in costs extra. On the box of your product it specificly sais i can RECORD using this product and it doesn't say I need to purchase an additional thing in order to make it work(also in your website). I paid over 200 american dollars for your product and I think That's totaly unfaire twords your customers. Please reply I am getting desprate with this thing.

fifofow user id 1002242

Is the KB37 all I need?

support@line6.com — Fri, 20 Nov 2009 13:45:00 GMT

Hi guys,

I'm looking to have a really simple and portable studio setup. I read about the KB37 and I'm really curious as to whether it (Along with a laptop, Cubase, instruments/mics and a set of headphones or studio monitors) is everything I'd need to do record/mix an entire project. Does the KB37 act as a low latency ASIO sound card? Or would I also need an external soundcard like an M-audio Fast track Pro or a Presonus Firebox to get the full mix output (including midi vsts and all inserts) to headphones or monitors? Also, can you completely bypass all the Line6 software and just use it as a digital interface to record dry and then use other plugins like Guitar Rig or are you forced to always have extra Line6 software running?

It seems potentially really powerful but if I'd need another DI Box or couldn't just bypass all the Line6 Software when I would like to just record and use other tools, I'm probably better off to just buy a small USB sound card and midi keyboard. Thoughts?

Thanks!

Please help!! No signal or level from Toneport UX2

support@line6.com — Mon, 05 Oct 2009 02:44:26 GMT

I'm running two SM 57s through the mic inputs on the toneport, and into my Macbook pro via USB. The computer sees the toneport, but the toneport doesn't seem to register any signal (the "level" meters on the unit do not move, and the software (garageband) also doesn't show any signal coming through. I have updated the drivers and the firmware to the latest versions.

Thanks in advance!

UX2 recording

support@line6.com — Tue, 17 Nov 2009 12:16:31 GMT

I recently bouhgt an UX 2 from someone else.

I wanna record 3-4 instruments at once an than also that recording goes to seperate channels.

I didn't get the Ableton application or do I have to download this.

Thanks for answering.

R. van de Velde

Netherlands

HP laptop vs. POD Studio UX2

support@line6.com — Wed, 01 Apr 2009 01:05:19 GMT

Hey, I have a Line 6 POD Studio UX2, and also have a HP laptop. But everytime i got to use my UX2, theres big time glitches comming from my headphones. I tried everything that other people told me, and also what the manuels told me to do, i also called the support line, and still didnt help. So now im wondering if there something i can change in my computer, for it to not have any glitches sound? Because one of the guys told me from support is that POD studios dont work well with HP laptops, witch I find rediculouse, so any help would be awsome. Thanks.

Gearbox plugin connction problem after Podfarm install

support@line6.com — Tue, 27 Oct 2009 11:30:02 GMT

Is there some kind of conflict between these 2 programs. I have owned GB plugin since it came out(using it in Cubase). I have it installed in Podxt and I installed the free Podfarm plug in Toneport ux2.

Now the GB shows as not connected in cubase. Podfarms size is just too big to use in my DAW or I would just use that. I like GB's small size--thats why I bought it. I uninstalled Podfarm on UX2 and refreshed my GB in Monkey but still no luck. All my drivers are up to date and I am familiar with connection trouble shooting/rebooting/unplugging usb and so forth.. I have mixes to do.

any ideas?

thanks

I tryed to activate pod farm platinum but I can't did it

support@line6.com — Tue, 17 Nov 2009 19:06:19 GMT

I already have Pod studio Ux2.I bought Pod farm Platinum, I bought Ilok Usb key, I activated the program on web site, i download it on my ilok the license, I download pod farm from line6, I tried to open it with the usb key, but the pod farm that i opened was the normal pod farm. What do I have to do for pod farm platinum? Please help me!

Kind regards

Stefano from Italy

Switching to another preset with UX2

support@line6.com — Fri, 13 Nov 2009 13:00:15 GMT

Dear Sir,

It is regarding POD Studio UX2 operation. Currently owning UX2 and Variax 600. Typically when playing a song, will switching the Variax 600 to acoustic guitar and set the Gearbox's amp and effect to a configuration for the acoustic guitar. Down the song, when come to the 'solo' part, which typically will switch to electric guitar on the Variax 600, will also wish to switch to another set of configuration for the amp and effect. Any advise on this endeavor with the current devices I own or is there any additional device I will need to make this endeavor possible?

Read about footswitch in the UX2 and MIDI cc on the Gearbox. Seem like these features are relatively close to making the job above. Any advise on the procedure if these features are possible to do the job. Thanks in advance.

Regards,

Singapura

Line 6 Toneport UX1 Makes Noise and Pops

support@line6.com — Fri, 20 Mar 2009 18:46:40 GMT

Hello,

I´ve been using my UX1 with an Intel-based laptop running WXP Sp3 and it worked perfectly for the last months. One month ago, I got an HP TX2000 series laptop (AMD Turion X2, Ati Radeon 3200, 2gb RAM) running Vista and my UX1 just can´t seem to work. I´ve updated everything to the latest drivers, tried disabling Wireless, Onboard Soundcard and everything that has been sugested in this forum, but nothing seems to work. When I change buffer sizes I get some difference (some sounds I play in the guitar are recognizable) but it´s still no good. Is there any known issue with Toneport UX1 and Vista or AMD?

UX2/Pod Farm: Volume Pedal & Footswitch use?

support@line6.com — Sun, 18 Oct 2009 12:18:37 GMT

Hi,

I am trying to use a volume pedal with my UX2. Can someone confirm that this is possible at all? The UX2 has 2 'footswitch' outputs and I have tried connecting various volume/expression pedals to both of them, including a genuine Line6 volume pedal, but it does not work. In fact, I can't get any footswitch to do anything..... It would be good to be able to use a latch-type footswitch to do punch-in and out during recording/overdubbing. I would be grateful for any hints and tips. I read all the documentation I could find, but to no avail.

Many thanks in advance!

Udo.

Problems with UX2 and video+audio

support@line6.com — Sat, 14 Nov 2009 17:34:30 GMT

Alright, so basically I have this damn annoying problem with my UX2.

It overruns my normal soundcard, which is what it's supposed to do of course. I disabled my internal soundcard. I had some problems with crackling but I thought I solved that by changing USB port and optimizing my PC.

Turns out, the audio starts crackling hard when I, like watch a video on youtube, or when I play music out of anywhere in general whilst something on the screen in moving. Even when I scroll in IE, it starts crackling. When someone comes online on MSN while I am typing this, it is enormous crackle. And the stupid thing is, CPU usage doesn't go above like 20% or something. I just want to be able to properly watch video's on YouTube, or listen to some music while surfing the internet, without having annoying crackles. Oh and it doesn't crackle when I'm using podfarm (which also moves, but apparently doesn't affect anything... UX2 is set as soundcard everywhere, so any interferring is not possible)

tl:dr; audio starts crackling whenever something on the screen is moving.

What do I do? I already tried adjusting stuff in the MIDI control panel (you know, Control Panel -> Line 6)

Specs: Acer Aspire 9414ZWSMi

Intel Pentium Dualcore 1.86 GHz, 120 GB harddrive, 2GB DDR2, GeForce GO 7300 up to 400 mb.

THanks!!!

Hooking up an external mixer to the toneport ux 2

support@line6.com — Sun, 15 Nov 2009 20:21:24 GMT

I really need assistance with this matter. Is it possible to hook an external mixer to the ux 2? I have a yamaha mg 12/4, now can I go from the main outs of the mixer to the line inputs of the ux2? if so how do I do this? cause in pod farm you have to select the line input 1 or 2 right? I want to hook up a mic pre amp too, so is it possible to hook these things up?

Thanks for your time it is very appreciated. ;-)

Ryan

Issues getting Pod Farm to work in Sonar 8 with Guitar Port interface

support@line6.com — Thu, 05 Nov 2009 15:38:07 GMT

I have been struggling for quite a while to get Pod Farm to work in Sonar 8.0. If I run Pod Farm stand alone it works great. As soon as I attempt to use Pod Farm as a Plug-in in Sonar the tone goes from great to horrendously awful. I have done all of the obvious things that I can think of, including updating to the latest version of Pod Farm, making sure the firmware on the Guitarport is up to date, checking and adjusting the buffers in Sonar, and so on. I'm not sure what to do next. If someone has a list of systematic steps to follow so that I can identify and resolve my setup I would be very, very appreciative. Here are some details about my computer:

Pentium D dual core running at 3.00ghz

3 GB ram

Plenty of SATA hard drive space

Delta 66 Audio card with most current M-Audo drivers

Guitar Port interface

Pod Farm with fully activated plugin packs

Latest Line 6 divers (verified by Line 6 monkey v. 1.31)

Sonar 8.3.1 installed

Symptoms when I use Pod Farm in Sonar:

Recordings are jittery, and break up.

Sound cuts out intermittently.

Has a tone similar to a ring modulator, even when I am using a basic setup (JC-120 model with no effects - no chorus or anything else)

I'm feeling very frustrated because I can't seem to figure out how to resolve this problem. Does anyone have any suggestions on what I should try next?

Thank you for your help!

Scott

Toneport UX1 - Monkey/Gearbox/Podfarm no longer detect it !

support@line6.com — Thu, 19 Nov 2009 14:02:03 GMT

I have a Toneport UX1 which has been happily connected to my PC and working for over a year.

Yesterday, I launched PODFarm standalone and it complained that no compatible device was detected.

I took the time to dowload the latest drivers, monkey, gearbox and podfarm and re-installed them all.

Still, no apps can see the Toneport.

Note :

The green light is on.

The Toneport is my audio interface - windows sees it and it works.

ASIO Drivers see the Toneport and work with it, too. I can still get sound out of it.

Anyone seen this before - any ideas of what to try next ?

Thanks,

Mark.

Bad Sound

support@line6.com — Tue, 10 Nov 2009 17:10:29 GMT

Hi.

I got the podfarm just above one week ago.

I was happy with sound etc. But wanted more bass amp.

So i bought expansion package.

And after downloading/following instructions

my pod farm lost its good sound.

Before the basspackage i was able to play along with songs,

but now i can hardly hear the bassguitar while playing.

I can almost hear it as well from my fingers then from my headphone.

This was not a problem before getting bassexpasnion.

After getting this troubles, i uninstalled everything in order to reinstall, got cd.

But nothing happend, just the same problems.

Actualy i was not able to install at all, so i downloaded the podfarm from your

netpage.

Whats up with my pod?

I notized while reading instruction, trying to figure out whats wrong, there are no plugins

in the folders where they are supposed to be according to instruction.

Plz help,...

chris

ux8 usb firmware unknown

support@line6.com — Sun, 15 Nov 2009 05:24:45 GMT

when im starting to power up my ux8, its working nicely. but after a few minutes turning on. the signal clips blinks on and off the line 6 monkey

detects that theres no usb firmware installed so i connect and reconnect again the usb, still the same. when itry to update that selection no response from the monkey

how can i resolve this? is my usb cable the problem?

Adjust Toneport UX2 to work at 24 bits

support@line6.com — Fri, 13 Nov 2009 15:21:46 GMT

Hello!

First of all, sorry for my english, I'm spanish.

I've been recording with Cubase at 44100Khz and 16Bits but now I'm going to start recording at 44100Khz and 24 bits.

I've setup Cubase to work at that frequency but I can't find the way to setup my toneport at 24bits.

Where can I do it?

P.D: It is an UX2 through USB with Pod Farm.

Thank you!

windows 7 bsod toneport ux2

support@line6.com — Sat, 07 Nov 2009 16:30:01 GMT

Hi,

I have been running windows 7 32 bit with beta drivers, podfarm, riffworks with a ux2 and keep getting BSOD at least twice a day. Windows reports the line6 driver / device to be the cause.....so what shall I do?

please help i'm finding it impossible to use my setup for music creation now.....which is sh1t as that is why I bought all this in the first place!

Windows 7/POD Studio UX2 compatibility

support@line6.com — Sun, 15 Nov 2009 12:16:40 GMT

Thinking of purchasing a new laptop and the UX2 for first time music recording. Concerned about compatilbility issues noted elsewhere. Can anyone confirm whether drivers for Win7 are now in place or dates for when this is expected? If Line 6 are struggling with this, I'll have to think about a different set-up, shame as really fancied a go with the UX2 and POD farm.

Pod 2.0, conneting to computer

support@line6.com — Mon, 11 May 2009 22:03:50 GMT

I'm trying to connect my pod 2.0 to my computer so i can download different tones/ effects. I have bought what i think are the correct midi cables ( its a MIDI USB IN and OUT... im not very familer with any of this). The cables connect into the pod easily and have put the MIDI IN cable and OUT in the correct slot in the pod.

I downloaded the Line 6 edit and Line 6 Monkey but have had problems getting it to recognise my Pod 2.0. When I insert the USB into an open slot in my computer, the computer recognises the device (a balloon comes up saying its recognised device and ready to use). BUT... on the line 6 edit when i try to configure i click "Refresh"... nothing happens, so i click add and select my Pod 2.0 and click "ok" and i get "no device" "Could not connect to pod 2.0, please check all MIDI and power connections and click 'refresh' in the tone locker" and i still cant get it to recognise.

On the MIDI cable i have the power LED light lit... but there are 2 other LED lights IN and OUT which arent lit. Everything seems to be connected fine.

Any ideas? any advice would be great!

Thanks

Bobsywobsy

PS. Look at the attached pictures if it helps. Thanks

POD Farm won

support@line6.com — Fri, 13 Nov 2009 00:37:23 GMT

Hi is there a way I can download something that will let POD Farm recognize my POD X3 Live? I want to be able to go into POD FARM and switch amps and effects and have them playable. Right now I have to see what POD Farm has and change it manually on my POD X3 Live. Thanks a lot.

New User enquiry

support@line6.com — Wed, 18 Nov 2009 05:57:31 GMT

Hi, we have had the Toneport Ux2 for over 12 months now and have not yet used it till today as been busy working and editing midi files on Cubase; We have mixed down our files to audio tracks now and I have been told that we should use the Toneport as an interface between the laptop and our mixer for playing back our music for live performance. I have connected the system as such; from USB on laptop to the USB on the Toneport, then from the two Analog Outs of the toneport to the channel inputs on our soundcraft desk. I have previously connected the laptop directly to the mixer via the headphone output of the laptop and have been able to play the files. However, on connecting the Toneport, we are unable to open the Windows Media Files to play the audio tracks we wish too; I have also tried connecting from the headphones output on laptop to the Line Inputs of the Toneport and have still had no success. Failing this I went to the section on the toolbox to load tracks into Toolbox and play them through there though it wouldnt let me do this either. I know there is something simple and silly that I have overseen but could use some help on this to use our Toneport.

podfarm as a plugin

support@line6.com — Sat, 07 Nov 2009 19:58:08 GMT

hi, i recently had to format my HDD and reinstall all my music software. I was wondering how I go about using podfarm as a plugin again as I paid my license a while back but now dont seem to have the option to use podfarm as a plugin anymore after the reinstall

any advice will be great

Purchased POD Farm license

support@line6.com — Thu, 12 Nov 2009 20:25:51 GMT

Hi.

I have the PODxt and I just purchased the POD Farm license. But When I start POD Farm I do not have the PODxt to choose in the POD Farm menu when starting the program.

Could you please let me know what I am doing wrong and what I need to do to have POD Farm recognise my POD xt.

Thanks..

Pod Farm keeps saying No Authorized Device ...

support@line6.com — Thu, 06 Aug 2009 21:30:28 GMT

I have the Gear Box Plugins Gold package and I'm using a Tone Port DI to run them ( I don't use it as a sound card )

I use the Tone Port UX2 for my sound card.

Mac OS 10.5.7

Logic 8.0.2

I keep getting this message..

Sometimes it works and sometimes it doesn't.

If I restart Logic it will work and then just the plugin will stop working at random times.

I've tried different usb ports as well.

This is a pain.

How can we fix this ?

Also all the line 6 drivers/software is up to date.

Thanks

Greg

POD Farm "Platinum" license for used POD X3

support@line6.com — Fri, 20 Nov 2009 17:56:31 GMT

I just got my first POD X3 from craigslist ( pod x3 and power supply only) and I'm newbie in this forum.

I installed all latest and greatest SW using Line6 monkey utility and basically I'm in a learning process.

The question is about POD Farm - looks like I'm having not a full version ( "Platinum" I beleive) which suppose to be compatible with my POD X3.

Is there any procedure how to re-activate ot obtain the license for POD Farm Platinum ?

Thanks much!

Using PodFarm and Gearbox as plug-in

support@line6.com — Sun, 15 Nov 2009 23:38:31 GMT

Bought a Toneport UX2 a couple of years ago. Been using it a lot lately with Garageband. Downloaded the latest version of Gearbox and added PodFarm. I just discovered it could be used as a plug-in. When I try to do so with either, Garageband recognizes them but I get Line6 error messages.

With PodFarm, it's the one that says something like "an authorized device is not connected or blah-blah-blah." Went to Monkey and tried to activate by typing in Refresh per a post I'd read. It goes to the server, downloads some add-ons and says transaction was successful. But then I have the same problem back on Garageband. Is it possible that I now need to purchase a license for this software for $49?

That's fine since PodFarm came out after my Toneport but I have the same problem with Gearbox. I would have assumed I was already licensed for Gearbox plug-in use when I bought the Toneport. When I open it in Garageband, I get a message that says I need to activate Gearbox and when I try to click it, it says that Monkey is not installed - which is incorrect.

So what do I have to do to get one or both of these guys going? Thanks in advance.

Toneport UX2 - Huge glitching problems on Windows Vista 64 and Windows 7 64 - HELP!

support@line6.com — Fri, 06 Nov 2009 16:33:39 GMT

I'm using a Toneport UX2 on my PC (Intel Core 2 Quad 2.83ghz with 8gb RAM).

I had been using this without issue on a 32bit Vista system up until recently. I'm getting "glitching" (cracking, popping) during playback of any audio (*including playing guitar, cd's, even windows tones).

I was using Vista 64 but today upgraed to Widnows 7; I thought Win7 might take care of these issues but they're still there. I;ve tried the new Windows 7 beta drivers. I;ve tried messing about with latency settings, 16 bit, 24 bit, 32 bit options etc. No Joy!!!

Can anyone help with this? I have read about others with this problem but posts seem old and nobody seem to have an answer in anything I've found to date.

I've spent alot of cash on this gear and the add-ons, I really dont want to have to buy something non-Line 6 just to get over this.

Any comments/thoughts would be appreciated.

Support Ticket: no respons

support@line6.com — Mon, 23 Mar 2009 22:00:00 GMT

Dear Line6,

A support ticket was opened for me over a month ago and I haven't had a respons up to now. When can I expect an answer?

Regards,

Rene

USB hub..??????

support@line6.com — Sun, 15 Nov 2009 00:20:41 GMT

HI..I want to use a USB hub...ONLY for dongle value...No need for audio drivers from L6...This should be totally OK..Correct ?? JON

UX2 totally useless due to crackling

support@line6.com — Sat, 04 Jul 2009 17:05:57 GMT

My laptop broke down some time ago so I got myself a new one. I installed Gearbox and Toneport UX2 drivers but I can't get them to work properly. I use FL studio as my main DAW and every time I start it I get massive amounts of digital crackling and stuttering. This also happens when I start Gearbox. I can't play mp3 music through UX2 either. I've tried maximazing all possible buffers, shutting down all the other audio devices and so forth and I have the latest drivers but nothing seems to work. Once after I booted the system I got a few seconds of proper operation, but then the crackling started again and I haven't been able to replicate this behaviour.

If anyone has any useful advice, it would be appreciated greatly. I'm getting rather desperate not being able to make music.

My laptop is HP Pavilion DV7-2050eo with an AMD Turion X2 dualcore processor and 4GB of RAM and my primary audio device is an "IDT Audio" high definition audio device.

Thanks,

Kaarlo

Pod Farm won't read Live X3

support@line6.com — Fri, 13 Nov 2009 00:37:56 GMT

Toneport problem with Mac OSX 10.5.8

support@line6.com — Thu, 12 Nov 2009 03:56:26 GMT

So I've had the toneport ux2 for about a year and recently bought an imac. I installed gearbox and when I connected the Toneport nothing lit up. I downloaded the drivers off of the Line 6 website and installed them and now the Toneport lights up, but does not read my guitar when I connect it and play (the knobs on the LED readers don't move and I don't get a sound/reading in gearbox.)

Help?

Thanks.

-Itamar

Software Replacement

support@line6.com — Sat, 14 Nov 2009 23:35:55 GMT

Is there any way possible to get replacement discs for Podfarm Platinum, Abelton Live, and Reason. I just purchased a TonePort KB37 and the box didn't include any of the discs. I paid $350.00 (US) for it and expected to be able to use it right out of the box, but I have no use for it if I have nothing to use it with. I specifically bought it for the PodFarm plug in. Anyhow, thank you and hopefully I'll get some good news.

Lagging / Delays

support@line6.com — Thu, 12 Nov 2009 21:23:12 GMT

I am running my UX2 through POD Farm and Reaper for my recording software. Lately I have been experiencing some lagging when I play, for example I'll play a note and it will be picked up half-a-second later. I noticed it starting to happen when my band recorded the drums and I set POD farm to dry input, after this when I changed it back to processed I started noticing the problem. I tried messing around with the buffering settings and muted the track while recording, this is what the Guitar Center employee told me, but it went to no avail. Any help would be much appreciated.

Does Pod Farm work with USB mixers or other interfaces?

support@line6.com — Sat, 14 Nov 2009 20:31:57 GMT

Hi, I was wondering if Pod Farm will work with USB mixers or other interfaces such as the M-audio fast track; or does it only work with Line 6 products?

pod farm platinum activation

support@line6.com — Wed, 18 Nov 2009 01:59:41 GMT

Hi line 6

I already have Pod Ux2 studio.

I bought Pod Farm Platinum and an ilok Usb Key.

I've registrated the program on web site, i've activated the ilok license and download it in the key.

I tried to open Pod farm Platinum with ilok plugged in but the program that run it's the normal Pod farm.

I'm sure that i missed a step.

Please show me what do i have to do for activate Pod farm Platinum.

Kind regards

Stefano

Ableton Live lite 4 limitations

support@line6.com — Mon, 16 Nov 2009 14:20:12 GMT

Planning on purchasing Studio UX2

The box includes Ableton Live lite 4 and I have a few question about this.

Once the 4 tracks have been utilised can I save as an MP3 or WAVE?

CAn this saved file then be reopened as a single track? Why format can I save projects in?

I'm not looking to be the next Phil Spector, I just wanna know if I can play around with multi tracks.

Used Toneport Ux1 Required Software?

support@line6.com — Fri, 20 Nov 2009 21:00:31 GMT

I will be recieveing a used toneport ux1 soon and would like to know what drivers and software should be installed first,here is a list of software programs i have downloaded:line 6 monkey ver.1.31,drivers ver.3.4.3.8,pod farm ver.1.11,riffworks 2 ver.2.22,gearbox ver.3.70,if there is any additional software i can download that will work with the toneport ux1 please let me know?thanks in advance.

UX 2 Help

support@line6.com — Sun, 15 Nov 2009 19:05:06 GMT

I recently bought the UX2 and I'm having some difficulty recording. Actually I'm not able to record anything at all. I'm using cool edit pro 2.0 at the moment. I am able to use pod farm and get sound through the headphones and output signals but when I try and record I have sound but no signal registering in my recording software. Thats is to say I have the sounds and tones I'm using in pod farm but nothing in my recording software as I record or when I try and playback the recording. It seems like this is just a simple error in settings but I haven't been able to fix the problem. Any help would be much appreciated.

Thanks,

Seth R

Unable to select Mic input

support@line6.com — Sun, 15 Nov 2009 04:46:00 GMT

I'm running PodFarm on OSX and when I plug in a mic on my KB37, I'm unable to select it in PodFarm. I'm only able to select Instrument. Logic and Garage Band don't seem to be too helpful in determining how to get the mic to work. The keyboard doesn't work in PodFarm or Logic, but I am able to use the keyboard in Garage Band.

POD farm AU validation failure

support@line6.com — Thu, 13 Aug 2009 19:15:52 GMT

I just bought POD Farm for my Mac running Logic Studio Pro 8. After running Line 6 monkey it informed me there was a newer version, which I downloaded and installed. Now upon booting Logic Pro POD farm v1.11 repeatedly fails the AU validation scan procedure and has to be disabled for Logic to run. So far I cannot use POD farm until this is resolved. See the text string below for details.

Thanks

VERIFYING SPECIAL PROPERTIES:

VERIFYING CUSTOM UI
Carbon View Components Available: 1
auvw 6PAU LSIX - Line 6: POD Farm
PASS

Cocoa Views Available: 0

VERIFYING CLASS INFO
WARNING: Preset name is not retained in retrieved class data
PASS

TESTING HOST CALLBACKS
PASS

* * PASS
--------------------------------------------------
PUBLISHED PARAMETER INFO:

# # # 162 Global Scope Parameters:
ERROR: Parameter did not retain set value when Initialized

* * FAIL
-----

System info:

Intel Mac Pro quad 2.66GB, 13 gigs RAM/OS 10.4.11/Logic Studio Pro 8.0.2

Line 6 UX2 Toneport/Mac problem

support@line6.com — Sun, 08 Nov 2009 18:31:28 GMT

Hi,

I just recently bought a Macbook and have just been installing Gearbox to use in conjunction with Logic Pro 9. However, upon installing and going to use it, despite being plugged in and the meter lights on the UX2 being lit, whenever I open Gearbox it cannot connect to it/doesn't recognise that it's even plugged in. I went into system preferences to look at the settings etc and on clicking the "Pod Xt Family USB" icon I got the message

"Can't open because it doesn't work on an intel based mac"

Please advise as I would like to use my UX2 with my Macbook.

Thanks

How can I use Pod Farm in Cubase SX 3?

support@line6.com — Sun, 22 Mar 2009 20:31:20 GMT

I have tried in several ways on how to load the plug-in but I still haven't really found how, I have loaded it by adding an effect channel on a track and it loads but it doesn't detects sound and I don't hear anything, I set the VST Audiobay to an ASIO UX1 (which I think is my pod studio device) and it seems that Cubase detects the sound I'm playing with my guitar but when I load Pod Farm it doesn't detects sound and therefore I can't hear anything. What am I doing wrong? How can I load my Pod Farm plug-in in Cubase correctly?

Monkey & Driver v 4.1.0 Mac OS X not work with POD Studio UX1

support@line6.com — Fri, 08 May 2009 14:47:54 GMT

I have problems with previous versions of Monkey (maybe with driver? I dont know. POD farm works correct.) New version of driver (4.1.0) have a same problem. Monkey doesn't recognise UX1, so I can't get my FX Junkie and so on... Question to line6: When you fix this bug?!

see thread: http://line6.com/community/thread/5622?tstart=0

Acid?

support@line6.com — Sat, 14 Nov 2009 18:43:19 GMT

I am looking into purchaseing Pod Farm. Is it compatible with Acid?

Pod Farm VST and RTAS plug-in freezes Pro Tools and Kore 2

support@line6.com — Thu, 22 Oct 2009 18:38:36 GMT

Hi,

I have been using Pod Farm without any problems for over a year in Pro Tools 7 and Pro Tools 8. I just switched from an Apple 5 to a MacPro 8-core. I uploaded the latest drivers and version 1.11. The Pod Farm stand alone works fine, but the VST plug-in causes problems in Native Instruments Kore 2 (the program freezes while launching, while it is scanning the Pod Farm plug-in) and the RTAS plug-in causes Pro Tools 8 to freeze while trying to open the Pod Farm plug-in. Please help, I have been trouble shouting for a day now, trying older versions, etc. Nothing seems to work and I am on a couple of deadlines.

Ableton Live Lite Line 6 Studio Edition

support@line6.com — Wed, 29 Apr 2009 10:03:13 GMT

Hi guys,

I am considering purchasing the Pod Studio UX2 for some quick and easy first-time home demo-ing. I really like the idea of the UX2 hardware, particularly the fact that it seems to be optimised for recording guitar, and the zero latency monitoring feature, but I have some queries about the bundled DAW software. I am reasonably familiar with Cubase but I have never used Ableton before. I wondered if anyone here could provide me with a few bits of specific info?

Does the version of Ableton that is bundled with Pod Studio support VST plug-ins? There are a number of VST plug-ins that I really like and would want to be able to use them if I can.

I read on the forums here that the 16 tracks you get with the UX2 is actually 8 real audio tracks and 8 midi tracks? Is this definitely the case and if so does that mean there is no way to get 16 real audio tracks in this version of Ableton?

Does anyone know how easy it is to move projects between Ableton and other DAW programs, such as Cubase? The reason I ask is that my band mates work in Cubase and we often email eachother small projects to work on when we are writing. I'd like to know if I'd be able to port audio tracks from Cubase into an Ableton project? I suppose I could do it on a "wav by wav" basis? Conversely can you export wavs so that my band mates can import back to Cubase?

Many thanks for your time and help. Apologies if I seem naive, I am still quite new to all this home recording business!

Rhydian

Windows 7 laptop

support@line6.com — Sat, 14 Nov 2009 12:16:58 GMT

Hi.

I have a Toneport KB 37, a variax acoustic 700 and workbench. I've bought a laptop in the summer to use as a dedicated homestudio. It had Windows Vista on it, the KB37 worked fine but the recording software was plagued with problems due to Vista's clumsiness. I gave up and waited for Windows 7 which promised to be better. It seems it is but I'm guessing I don't have the right drivers for Windows 7 and i can't seem to find them on your website.

Have I missed them?

Thanks

John

Gearbox and PODfarm the same license?

support@line6.com — Sun, 15 Nov 2009 13:40:29 GMT

My one license key for Gearbox and Pod Farm are currently connected to my X3L.

Can I have the license key attachted to my X3L for Pod Farm and

the same license key attachted to my XTL for Gearbox plugin?

I want to use both in one recording session.

KB 37 not being recognised when plugged in.

support@line6.com — Tue, 10 Nov 2009 21:13:58 GMT

I'am having problems installing my Toneport KB 37. On numerous occasions i have installed the software following the disc orders. For exapmle: My Gearbox version 3 states "Install this software BEFORE connecting your hardware. I install the gearbox along with the KB 37 divers and plug in when asked to towards the end of set-up. However my computer fails to recognise the toneport is plugged in. When plugged into my hub the KB37 does have two flashing lights. in the past i have tried using many downladable drivers to help solve my problem but to no joy. To be honest i'm not the most technically minded person so please help.

I have an Advent laptop, Windows Vista if that helps?

Cheers

Joe

Need A Support Ticket To Transfer Riffworks Licensed to Broken Toneport to New Pod Studio

support@line6.com — Wed, 11 Nov 2009 18:35:50 GMT

I see that when you need to transfer Riffworks from one device to another you need to deactivate it. My Toneport UX2 is completely fried. I see others have needed a Support Ticket in order to complete this kind of transfer. Pleasse issue a support ticket so I can use my purchased Riffworks Line 6 Edition software with my new Pod Studio UX2. Thanks.

Since my ux2 has died,

support@line6.com — Thu, 12 Nov 2009 01:04:03 GMT

Due to mysterious noises, glitches ect............What other interfaces work with pod farm?

pod farm not working as plugin on live 7.

support@line6.com — Wed, 11 Nov 2009 03:25:20 GMT

pod farm not working as plugin on live 7. sound is distorting/breaking up. problem is worse when "input source selector" is in "stereo". other plug ins are working fine.

Computer Blue Screens after upgrading Toneport Drivers

support@line6.com — Fri, 13 Nov 2009 23:32:11 GMT

Just purchased a Gear Box Plug In package (Gold Version) that includes a Toneport DI-G USB interface. After using the included CD to load Gearbox version 3 and the included Toneport V3.2.7.0 drivers - everything worked fine (both Gearbox and Podfarm).

I then used the Line 6 Monkey to upgrade Gearbox from R3.0 to R3.7 and the Toneport Drivers from V3.2.7.0 to V3.4.3.8. This worked the first time I reconnected the Toneport but after disconnecting and reconnecting once - the computer attempted to re-install the Toneport drivers and then blue screened. Now everytime I plug in the Toneport the computer tries to re-install the drivers and then blue screens.

I tried re-installing the V3 gearbox software and this allowed the Toneport drivers (V3.2.7.0) to be installed and seems to work. But as soon as I upgrade Gearbox and the Toneport drivers - the computer again blue screens (this has occured at least 10 times now).

I have also tried other USB ports on the same computer and end up with the same problem after upgrading. (i.e. the Toneport works the first time it is upgraded and then blue screens after being disconnected and reconnected).

Is this a known problem? Is there a work around?

pod farm crashes with dual monitors xp

support@line6.com — Mon, 16 Nov 2009 20:16:07 GMT

im using pro tools 8.0.1 with dual monitors with windows xp when i open pod farm as an insert it hangs on the right hand monitor but not on the left hand one. I can scroll through all the amps and everything when the plug in is opened on the left hand monitor but not on the right. Even if i put the plugin in the middle of the 2 screens the left hand side will scroll but the right wont. Has any one else had this problem also has any one had any plugins that conflict with pod farm ive been pulling my hair out with this for about 4 weeks. PLEASE HELP!

Thanks Raoul

Pod Farm 2 in Latest Sweetwater Catalog

support@line6.com — Wed, 28 Oct 2009 17:16:15 GMT

A new version of Pod Farm must be on the way. I received my Sweetwater holiday catalog in the mail yesterday (like a Sears Wish Book for musicians), and noticed a "new" item listed: Pod Farm 2, in platinum and regular. Picture was very small, not looking much different than the current version. Anyone care to elaborate??? Anxious to hear the upgrade pricing/options...

crackling noise coming from ux1 interface

support@line6.com — Sat, 07 Nov 2009 14:31:37 GMT

I have had my ux1 now for a few months. it worked well on windows xp, although it did crackle a bit but it was tolerable.

I recently bought a new laptop with vista premium and the noise that it produced was ridiculous!!

I got a windows 7 upgrade when i bought the laptop but even when that arrived it was still terrible

the noise is like a horrible crackling sound and you can just barely make out the sound of the audio im playing back underneith it.

This makes my ux1, pod farm and riffworks completely useless because they only work with line 6 interfaces.

since the ux1 is my only interface my sonar 7 is now useless too.

if its not fixed soon ill have to sell the line 6 and buy an m-audio or guitar rig usb interface which i didnt want to do.

what can i do to sort this problem out??

i need a reply asap please or this is the last line 6 product ill ever buy.

-ste

Pops/clicks in Vista-64

support@line6.com — Tue, 17 Nov 2009 04:03:41 GMT

I previously had Windows XP 32-bit installed with my KB37 TonePort and POD Farm software...seemed to run fine.

Then, I upgraded to Windows Vista 64-bit Home Premium and now I get periodic pops/cracks in the sound. These pop/cracks happen when using my guitar through the KB37 TonePort with POD Farm and even when just listening to MP3s. I believe the problem lies withing the ASIO drivers and how they interact with a Vista 64 environment...not 100% sure though.

I have tried the tweaks presented here http://line6.com/community/docs/DOC-1490 , but to no avail. Has Line6 identified the cause of the problem and have a "get-well" date and patch to fix this? I am deeply concerned with being able to continue use of this equipment and future Line6 purchases. It would be disappointing to have to look to other companies for my equipment & software. Your support is highly appreciated!

Regards,

Sixstringer6

Custom preset changes tone with different laptop

support@line6.com — Sat, 14 Nov 2009 08:59:48 GMT

I was using a tohsiba laptop connected to my tone port UX1 and was using it as a EQ in the effects loop of my amplifier. Now my laptop has changed and I set up my new laptop to authorize the tone ports using the line 6 monkey and after that the same preset is sound absolutely horrible. I have copied the file I created on the old laptop, I even recreated every parameter unit to unit and still it doesnt sound like the old one. I know that the DSP engine works in the UX1, but this has baffled me. I used the EQ to get a good smooth distortion with a mid boost, some thing like VAI and now I am missing it. I can get my old laptop, hence I am in a fix as I am in the middle of a session recording and my producer will be mad at me.

-any help will be apprecited.

-Solomon Thomas.

WHY DOESN'T MY PODFARM WORK WITH XT LIVE?

support@line6.com — Tue, 17 Nov 2009 00:06:12 GMT

tHE VERSION I DOWNLOADED SAYS IT WORKS WITH XT LIVE BUT WHEN I TRY TO RUN IT IT SAYS NO COMPATIBLE DEVICES CONNECTED AND LIST THE COMPATIBLE DEVICES. POD XT IS NOT ON THE LIST. IT SAID IT WAS COMPATIBLE WHEN I DOWNLOADED.

Windows 7 Driver

support@line6.com — Wed, 29 Jul 2009 10:48:16 GMT

Hello,

I've installed on my pc Windows 7 RC and I've installed the windows Vista driver for TonPort KB37 (POD Studio version 1.11) but I have a problem: there are many rustles. I know seven is not in a official version, but I would like to use my TonPort KB37 on this O.S. There is a driver (also in beta version) work fine on seven?

Thanks

Paolo.

POD farm fails to launch

support@line6.com — Mon, 09 Nov 2009 14:38:30 GMT

I have seen a few other people with the same problem as me, when I try to launch POD farm I get this message: "POD Farm failed to initialize L6TWXY framework. (Code0x80007401)"

I am running Vista 64 bit, that is the only thing that I think could be a problem as I had to download a new version of Gearbox for Vista 64 bit. I just downloaded POD farm today so I cannot understand why it would not have 64 bit support.

Can anyone give me some assistance please?

Thanks.

Issue with my Tone Port GX and ASIO settings

support@line6.com — Sat, 07 Nov 2009 14:44:59 GMT

Hi, i'm trying to output the sounds of Reason through the ASIO settings on my Toneport GX and it just won't work, i cant listen anything, when i set the Audio Card Driver to "Line 6 Tone Port GX" it works but with a lot of latency, i need less latency and i used to get that with Windows XP but i cant get it to work on Windows Vista, help please?

UX2 Tone Port with Pod Farm and Logic 9.01

support@line6.com — Thu, 19 Nov 2009 18:44:47 GMT

I have a couple issues with the UX2 on my Imac.

Monkey tells me that i have all the current drivers etc.

1) Although it works for the most part,

When opening Pod Farm as a stand alone, I always have to choose the UX2 if I start Pod Farm where it used to be able to find it.

2) If possible, How can i get the UX2 to record two inputs at the same time, on seperate tracks in logic 9 ?

for example: Mic 1 and Inst 1 (Gear box seemed to offer this, although I never tried it)

3) Is it possible yet to choose the UX2 inputs within the logic as the host app?

Thanks, Todd

Toneport UX8 Warranty.

support@line6.com — Fri, 13 Nov 2009 16:42:48 GMT

I posted a thread a few weeks ago about my toneport having sudden failures. The instrument inputs all of the sudden became extremely degraded. I haven't violated anything in the warranty. My toneport has been sitting in my rack since its arrival to my door in March. I am needing to get a new one or have it repaired soon so I can get back on recording, Since it was purchased in march and I have a 1 year warranty on it I would like to know how I can redeem my warranty and have a working interface once again. Thanks, Jake Davis. www.myspace.com/pyramidrecording

No Sound: Toneport DI-G

support@line6.com — Wed, 19 Aug 2009 19:33:00 GMT

Hello,

I have recently purchased a new Toneport DI-Gold. The program opens up and installs just fine, but when I proceed to plug in my guitar (which works on other amplifiers), I hear no sound. My guitar cord is brand new as well. I have installed all the latest drivers for the program, and done every update Line6 Monkey has to offer. I have checked to make sure that the USB drives are functional, as well as making sure the gearbox is using the sound card on my laptop for playback. My gear is registered, I have looked at threads for help, I have extensively read the PDF (though I may have missed something), and I am out of ideas. I have checked everything I can think of: my sound works, my headphones (should I choose to use them) work, and everything seems completely functional with the toneport. I am even considering setting it as my default speaker and buying a headphone adapter (size 1/4 inch) so I can plug into the toneport and listen directly from there. However, I don't want to have to do that.

I also feel it is important to let you know that the GearBox indeed detects my guitar: When I strum a note, it shows up on the meter, as well as on the tuner.

After running a compatibility check, everything passes but:

- the chipset (it says I may have limited privelages, but I doubt that means no sound)

- My processor, Intel(R) DuoCore P6800 @ 2.4GHz (I read from one of your support threads that I need not put too much weight on what the monkey says)

- Drive DMA mode (Apparently mine is in PIO, but I don't know how to change it. Perhaps the problem?)

I may be able to take into a different room and use it with a desktop for troubleshooting's sake, but it cannot stay there.

I am using a 2 month old dell laptop, with 32-bit version of vista.

Thanks,

Steve

ux2 no audio output

support@line6.com — Sat, 14 Nov 2009 17:07:07 GMT

my ux2 was working fine then I was runing ableton live and it just stop producing audio output in all programs the drivers register and it appears to be working when I run pod farm.

Snow Leopard and Toneport ux2

support@line6.com — Sat, 29 Aug 2009 21:02:36 GMT

Installed Snow Leopard and got a message that the toneport driver is not compatible with Snow Leopard. Now the clip lights on the tone port are flashing on and off. What to Do?

What if you have both a Toneport UX2 (w/Add On packs) and the Pod Farm iLok?

support@line6.com — Thu, 03 Sep 2009 21:53:45 GMT

I put up a reply in the previous thread but since it is considered answered I thought you techs might not check anymore.

For those of us who have now installed the new ilok ver and have a previous ver w/model packs which cant be accessed from our DAWs, whats our next step?

Thanks!

UX2 Loud noise when running pod farm

support@line6.com — Tue, 03 Nov 2009 08:05:52 GMT

i recently bought a pod studio ux2 about last week. i have been recording fairly well until about yesterday

everytime i load pod farm, i get a very loud noise at the outputs. this noise comes up on the level monitors in pod farm

and in adobe audition which i use to record. the noise does not come out to the phones output.

i have since tried reinstalling pod farm, updating drivers, reinstalling drivers and changing the usb ports of the device and properly configuring them

this loud noise overpowers any input i might want to record thus making it impossible to record anything other than the noise.

i have seen other posts similar to this and have also tried plugging and unplugging the usb ports. i have also tried turning the phantom power switch on and off a number of times before, during and after reconnecting.

the last thing i did before the problem arised was try to monitor my yamaha psr 1100 (basic midi keyboard) which i had also connected to my pc from adobe audition onto my ux2, which i had done a number of times before.

i bought this item in tom lee hong kong while on vacation and am now back in the philippines.

please help. i am completely at a loss. i dont know what to do.

if not, are there other programs which i can use to configure the ux2 other than pod farm? i dont know if this is a software or a hardware problem.

TonePort and PODfarm won't work in Logic Pro 8

support@line6.com — Fri, 12 Jun 2009 12:08:44 GMT

I sent this email 5 days ago, and it says in your help stuff you normally reply in 48 hours so I figure it must have slipped through the net.

Please could you help as I am really stuffed at the moment until this is sorted. Thank you.

I also cannot get Gearbox or POD Farm to work in Logic Pro 8. (Nor Live 7 on my iMac).
I have checked similar threads in the Line 6 forums, and if anything am more confused than before.
So please bear with me if I repeat things that others have said, I do so in the hope that giving such detail my help someone to help me.

I've owned Toneport UX2 and Gearbox for 2 years and used it in Ableton Live and Cakewalk Project5 on a PC with no problem. I now have an iMac, this is where the problems start.

All my software is up to date. (line6 and Apple)

Both Gearbox and PODfarm work as stand alone items, but not in a DAW.

GEARBOX in Logic Pro.
I plug in Toneport via USB.
I open an audio track and insert Gearbox. When the GUI opens it tells me 'Ready To Activate' in the bottom right. When Monkey opens, Gearbox is not in the list of programs that can be activated. Nor do I have a message telling me that anything needs to be activated.
PODfarm is in the list, but it is not ticked. I tick it and in the 'license code' box I type the word refresh, click 'Activate', it runs through the whole prossess, and then says 'Transaction Complete' but of course nothing has changed.

PODFARM in Logic.
I load PODfarm as above and get a box that informs me 'No Authorized Device. A required device is either not authorized or not connected', But surely toneport is already authorized.

GEARBOX and PODFARM in Live 7
If I can get this lot working in Logic I'm not too bothered about Live, but it would very useful, and I did buy the product intending to use it in more than one DAW.
I have tried the 'You Tube' run through, that didn't work either. It may work for a PC as on 'you tube', but not for an iMac.

Thanks for your patience,

Rosco

PODfarm not recognised in Cubase LE

support@line6.com — Thu, 12 Nov 2009 22:19:57 GMT

L.S.,

I own a POD X3 PRO and now try to get PODfarm working in Cubase LE. For reasons I don't understand Cubase can't find PODfarm however standalone PODfarm seems to work fine. I have tried to activate this application in Line6 Monkey, but as I do not have a licensekey I get "transaction failed code 80003024" (probably PODfarm is already activated as I own the POD X3 Pro). When I try to open PODfarm standalone I noticed it does not recognize the POD X# Pro; I need to choose another device (UX1 for instance).

I hope you can help me with this issue.

Kind regards,

T. van der Veen

How Do You Connect PC Speakers To UX2?

support@line6.com — Tue, 26 May 2009 12:56:23 GMT

Hi, I want to use the spare rear speakers for my Creative Inspire 5.1 5100 speaker system that is normally connected to my PC. As I said, I don't have the two rear speakers connected and instead have connected them to the analog outs of the UX2. The speakers themselves have phono outputs so I connected these to a phono-to-1/4 jack input and then plugged those into the analog outs of the UX2. I then set the UX 2 as my default soundcard for both playback and recording in XP's audio settings (I currently also have a Creative Soundblaster Audigy 2 soundcard as default but I just changed it around to the UX2) but I hear no sound coming through the speakers when I try to play a music file for example. I can see the needles on the two level gauges at the front of the UX2 moving around so I know that sound is going through but I just can't hear it via the speakers. I tried disabling my Audigy soundcard and restarting the PC and still get the same results. Am I doing something wrong? I've opened up Gearbox but there doesn't seem to be any setting for selecting the analog outs or anything.

This then leads me to another problem, once I get the speakers working and have the UX2 as my default soundcard, I then want to make use of the ASIO driver so that I can use my Behringer UMX49 USB keyboard as a midi controller in my M-Audio Session software. I have tried selecting the UX2 as the ASIO driver in Session but it always comes back with errors saying it is either already being used or isn't connected. I know that the UX2 has supports for Reason and Garageband amongst others but I just want to be able to play midi keyboard through Session as a piano rather than having to use my huge Yamaha non-midi keyboard for practicing (I am currently having piano lessons). Does Toneport not work well with M-Audio's Session software? If not does that mean I have to get another piece of software instead? My piano teacher has a Mac and Garageband as well as the UX2 and a midi keyboard and all of them seem to work in harmony and she has speakers connected to her UX2's analog outs and has no problems, I just want to be able to do the same.

Sorry for the very long post and all the questions but I really don't know what to do and the Gearbox manual is just a waste of time. Thanks for any help you can give.

POD Farm Plug-In "Breaks" when I open a project in SONAR

support@line6.com — Wed, 28 Oct 2009 14:54:06 GMT

I use a bunch (3-4) of instances of PFPI to re-amp dry guitar in most of my SONAR projects. Sometimes, when I save a project and re-open it, I find that when I press play, none of the guitar tracks going through POD Farms are audible; I don't mean unprocessed, I mean there is silence. When I trun off the plugin via the SONAR console's FX bin, the unprocessed guitar take comes through, but then I turn PF back on again and it disappears. Whenever this happens, the problem instance(s) of PFPI don't show any activity - no signal is registering on the input meters. It seems to happen with every instance in a project at the same time, and just as randomly as the problem seems to occur, sometimes they will all come back to life the next time the project is re-visited. Anyone else see this or have any idea whats going on? For reference, POD Farm is 1.11, SONAR is 8.3.1, and OS is XP 32-bit. Thanks a lot

input seems to be damaged on toneport ux2

support@line6.com — Fri, 13 Nov 2009 02:00:11 GMT

hello...my device was working properly up until an hour ago. i had a guitar plugged in the normal input...with my hand on the strings i grabed a speaker cord to plug into a monitor and when i grabbed the cord the it made a loud buzzing through the speakers. now the instrument inputs on the toneport seem to be damaged. is it possible that a current ran from my hand to the strings then back to the toneport frying something in the input section? if so what did it damage and how can i have it repaired. thanks for your help.

nick

ILok will not unlock Podfarm Platinum

support@line6.com — Fri, 09 Oct 2009 00:36:29 GMT

I recently bought the Platinum upgrade for my Podfarm along with an Ilok. I set upt he ilok and all of the drivers per the instructions. The ilok website shows my license and ilok to be as being setup correctly. However when I run pod farm I still only get the basic features and I can find no evidence that it even sees the ilok .

Any thoughts

how do i get my free editing software for podxt?

support@line6.com — Tue, 17 Mar 2009 00:35:13 GMT

i recently bought a secondhand podxt, it has been activated in my name, but i am having trouble finding the free software on the line6 website, it says it should come with guitarport sofware, which i cant find anyware, i asume its been replaced with something, except everything i download says i need to pay. where do i get the free software for it?

cheers

ps, i instaled line 6 edit, but it comes up with a java rror everytime i try to run it

POD Farm v 1.10 upgrade hangs my mac

support@line6.com — Sun, 26 Apr 2009 22:40:01 GMT

Dear Line6

I downloaded the lastest upgrade to POD Farm - now my mac hangs when I launch it and has to be re-booted. On one occasion it got as far as saying it didn't have an input despite my UX2 being connected.

Can you help?

Sandy McAfee

Scotland

IM HAVING TROUBLES!!!! PLEASE HELP!!!!!!!

support@line6.com — Sat, 08 Aug 2009 06:48:09 GMT

gday everyone,

I have just purchased a line 6 toneport ux8, and i am having trouble setting it up. I am running ableton live, and i wanna record a bit of guitar, HOW DO I DO THIS????? i am really upset and frustrated right now and i need some help, someone please help!!!

My Ux2 and pod farm wont work in logic express 7. !-HELP-!

support@line6.com — Sun, 02 Aug 2009 15:56:29 GMT

hey, I recently bought my line 6 studio UX2 from sounds live in newcastle england. It came with all the extras, reason, riff works, pod farm ect.. My Ux2 works great as i have been playing with logic express 7 laying down some live drums over dace music with it. I have went to use the pod farm plug in in logic express 7 and i always get this error message.

A required device is either not authorized or connected. POD Farms GUI will operate during this session but the plug in will not process audio. please connect your iLok or Line 6 hardware and restart the application.

The thing is, I just got my mac over a week ago and it meets all the spec needed to run pod farm. It also runs pod farm fine stand alone. I have regestered all my line 6 gear and software and also my logic.

why wont this work. it seems silly to be honnest as it works on its own but not in logic??

If any one can help ild be very grateful. thanks

Andrew

Input Problem when POD Farm startet (line 1 + line2) UX2 (red front)

support@line6.com — Wed, 10 Jun 2009 13:40:41 GMT

if i start my computer and then ableton (asio UX2) - so i have inputs 1/2 and 3/4 from the toneport to use ..... everything perfect. line 1 is the input 1/2 and line 2 is 3/4 - but if i start the POD farm (standalone version) from up this time line 1 is input 1/2/3 and line 2 is only 4. i also checked the same situation with the gearbox (standalone) - there is no problem - but i want to use the POD farm! please support me - thanks.

No Mic Signal from UX2

support@line6.com — Mon, 02 Nov 2009 20:44:32 GMT

Ok, first off i would like to apologise if there was another thread posted about this earlier, i just havent had time to thoroughly check them.

Ok, so i bought my lovely new UX2 the other day and i seem to have a problem with the mic input. Im using the instrument normal for my guitar fine and its showing up on cubase SX3, but every time i plug my SM58 into my toneport, there doesnt seem to be any signal at all. There is no movement from the level meters

I have configured the settings with cubase so its the main driver, and it works with the guitar, but when i try and create a new mono bus (i think im right) it still wont pick up the signal for my mic.

Do you think its a configuration problem in Cubase that im missing? i have read over the "Gearbox 3.5" Recording thing numerous times and i still get nothing. Im worried just in case it may be my mic (which i loaned out to a friend)

Please help, if you can

Hi, I have Line 6 UX1 with Pod Farm. I can sound Pod Farm with my guitar alone using the short cut on the desk top. Ableton Live 8 finds the VST plugin and lists and opens it; however, I can't get Pod Farm to sound in Live.

support@line6.com — Thu, 09 Jul 2009 21:29:03 GMT

I have Line 6 UX1 & Pod Farm. I can get Studio UX1/ Pod Farm to sound using the short cut on the desktop. Ableton Live 8 finds the POD VST Plug-in, lists it and opens it (as demonstrated in the support installation video for Ableton Live); however, I can't get Pod Farm to sound in Live 8; it doesn't seem to register the guitar input. What am I doing wrong?

Regards

John

HELP!!!!!!!!!!!

support@line6.com — Fri, 27 Mar 2009 15:51:52 GMT

getting no joy at all with GX. I've installed latest drivers, plugged in via USB Headphones plugged in and Still No sound Can anyone tell me what I'm doing wrong cos getting hacked off!!!!!!!!!!!!!!!!!!!!

The Triple Pack + Gearbox + UX1 issues!

support@line6.com — Tue, 20 Oct 2009 11:47:56 GMT

Hi!

Today I bought "The Triple Pack" that was advertised via e-mail for $ 39.95.

Purchase went smoothly and it said that it required Toneport UX1 with Gearbox.

When I try to activate with the license code, via Line6 Monkey, I get an error saying:

"Error! You can't install that asset!

It's probably an upgrade and you don't have the asset installed!"

I made sure everything with Gearbox was up-to-date, but it just won't work.

Is there any way to solve this or will I have to get a refund?

I have a Macbook Pro, if that makes any difference.

Single (!!!) licence transfer.

support@line6.com — Tue, 06 Oct 2009 06:27:53 GMT

I own lots of line6 gear. there's a podxt live, a variax, an old pod and the toneport ux-2.

when buying the podxt(live) there was the fx-suite included. a bit later I bought a bundle containing the metal and collectors pack AND the fx'es. now I want to transfer ONLY one of the fx packs to my toneport but there's only ONE fx suite shown in my account. the collector's classic and the metal shop has to stay on my podXT(live).

on the other hand: the ux-2 is delivered with the fx and the pod farm plugin http://line6.com/podstudioux2/ but didn't show up in my account after registration.so I transferred the pod farm plug from my podxt(live) to the ux-2, but lost the bass amps on my podxt.

please let me know how we can manage this?

but the most important thing of all is to get the fx-junkie on my ux-2, because most of the pod farm plugs miss the effects.

thanks for supporting

henry

POD Studio UX2 Footswitch support

support@line6.com — Sat, 18 Jul 2009 06:24:27 GMT

I have bought the POD Studio UX2, I also bought a marshall footswitch with it since I was under the impression that one will be able to

stomp control the effects in POD Farm.

I tried this but no matter what the configuration, it didn't work at all. The footswitch light turns on and off, sure, but that's it.

I started searching on the net and found that the current release of POD Farm does not yet support the footswitch inputs.

So my question is, when will this be implemented?

I find it strange that the UX2 is designed with footswitch inputs but it nowhere states that this is for future use and not currently implemented.

My current version of POD Farm is v1.11

Thanks for your assistance.

Rgds

Francois

I HAVE PROPELLERHEAD RECORD!?

support@line6.com — Sun, 13 Sep 2009 22:49:34 GMT

Upon opening Line 6 Monkey, I am alerted of some "new features". Once these "features" were installed, I found myself having a green checkmark on Propellerhead Record. Pretty cool I think...Only problem it asks for a license key and my purchase history doesn't have any propellerhead record key or forthat matter i just don't have one in general so....what gives? Do I or do I not have Propellerhead Record or is it just a checkmark to tell that IF I HAD Record, my amp models would be waiting...?

Thanks

Pod Farm, upgrade to premium?

support@line6.com — Fri, 19 Jun 2009 02:32:46 GMT

I've got the standard POD Farm and want to get the Premium authorization. Do have to buy it out right or can I upgrade to it at a cheaper price as I already have the standard authorization?

free custom tone downloads

support@line6.com — Fri, 22 May 2009 22:08:17 GMT

how or where can i get frre tones to download linto pod farm? i was able to do it with the gearbox software but i like using pod farm much more. thanks.

Will POD Farm $49 download replace gearbox standalone in my Toneport UX2?

support@line6.com — Sat, 14 Mar 2009 13:28:12 GMT

Hi,

I recently purchased a used UX2 Toneport,with the included Gearbox software. I'd like to upgrade to the PODFarm software,but I'm curious to know if it will replace Gearbox as my standalone application?

Footswitch requires two clicks to activate - UX2

support@line6.com — Tue, 07 Apr 2009 04:35:27 GMT

I have a Leem FS-101 that takes two clicks to set off the midi trigger in my Gearbox through UX2. Any ideas?

Distortions and power boots ??

support@line6.com — Tue, 27 Oct 2009 20:13:25 GMT

Hi,

I bought my POD Studio UX2 last week. It is attached only via USB, no power supply. It pretty frequently gives distortion sounds through headset and sometimes while playing with a MIDI control all power goes down for a second... Any idea if it is about a broken unit or? My audio setup seems to be in correct way.

Best regards,
Kimmo

Active bass with POD Studio UX1?

support@line6.com — Thu, 09 Jul 2009 15:58:08 GMT

Hi,

I'm looking at purchasing the UX1 primarily to record bass. The UX1 doesn't have a PAD input and I use an active bass. Not being an expert on these things I'm wondering if I'll suffer using the single non-PAD input on the UX1.

I know the UX2 has this option, but I'm looking to keep this as cheap as possible and think the extra features would be overkill at this stage in my recording adventure (complete beginner, in other words!).

Will the high output from my bass cause distortion?

Any help and advice would be greatly appreciated.

Jamie

Can't get amp models in Propellerhead Record

support@line6.com — Sat, 25 Jul 2009 10:02:05 GMT

I am using Propellerhead's Record (Internet verification version - RC4) pre-release version and it won't show my extra model packs in the Line 6 devices. Record tells me when i open it that my computer isn't authorized to use the Line 6 models. I go into Line 6 Monkey and push the authorize button - it authorizes fine. When i open Record i get the same message again. All of my updates are current in Line 6 Monkey. I am still using Gearbox, but that didn't seem to be a problem for others who were beta testin/using Record. I am also having no compatibility issues according to Line 6 Monkey. What could be my problem?

Thanks,

Billy

Win XP SP2

AMD X2 2200

2 GB ram

Toneport DI-G Latency Issues

support@line6.com — Sat, 30 May 2009 23:45:31 GMT

I received my Less than a year ago, like 10 months ago from musicians friends because it was in clearance for 99.99. The toneport Latency was great with my laptop, having it on the second tick mark to flawlessly proccess my guitar, with absolute no latency at all, even with recording, my guitar signal would be picked up and sent through all my software with no issue at all. Starting maybe 3 months ago, I noticed i started to get pops here and there after a software update, fine i said shoving it off so i would slide the buffer to the right to deal with the pops. Unfortunately now, two weeks ago a set the slider to the extreme far right for the largest buffer, and now i get pops and clicks every other 5 notes on my guitar while doing a scale run, and i get clicks every other 2 seconds having it set as my soundcard for my windows media player to the point where i don't use the toneport at all. There is no pattern at all with the clicks, it is steady for 5 secs, then it goes into click, audio 2 secs, click, audio 1 sec, click. I only used the toneport to record maybe 10 songs, and that was in the first two months i had it. I used the toneport to play my music through using the WMP all the time though, and now i can't use it at all with the clicks and what not. There has gotta be someone there to help me, my cpu usage is always like at 2% with a great system. I don't even care about latency recording issues, the toneport itself is having latency issues and proccessing sound. Some1 please help, sucks because this truly sounds like a hardware issue with my toneport. I've tried updating, reinstalling gearbox to the newest version and even going back to the installation cd to see if it would work and I am still getting Latency issues. The Installation CD is vers 3.0.

I run Windows Xp Sp.2, with a Intel Duo Core 1.83 Ghz proccessor. The only problem with my computer is that it doesn't want to instal Windows networks frame 1.0 or 1.1, i forget, but i have all the rest, would that be the issue, but i don't understand how the Latency has just gotten worse, and worse, and worse overtime. It is the most frustrating thing, to have something you enjoy, than slowly crap out on you overtime. Please help.

Recording drums with UX8 and Sony ACID

support@line6.com — Thu, 02 Jul 2009 15:55:12 GMT

Hey, I'm having a lot of trouble with recording drums. I use sony ACID and Pod Farm V1.03 as a stand alone program (mostly because I haven't tried using it as VST). But basically everything that can go wrong has....don't get me wrong, I love Line 6 gear but I just can't seem to get it right.

I've tried everything I can think of, I want to use my 5 mics but the most inputs I can get a signal from is 3. In acid I have the track I want to record set to "Stereo - Input 5/6" (This is because it's the only way i can get more than one channel to record) which sounds okay because it records 3 channels in stereo. While that sounds pretty good and I should just get used to having only 3 channels, it records in stereo with one channel panned to the left, another panned to the right and the other in the centre. The first thing I did was went to the driver settings and panned all of the channels to the middle....nothing happened. I'm about ready to send my UX8 back. I'm probably doing something very obvious wrong but yeah, i'm out of ideas, i've tried everything and I'm really desperate.

Is it just a matter of using Pod Farm as a VST? Would that make any difference?

If anyone can help me with this I would appreciate it so much. If anyone who uses ACID happens to see this can you please run me through how you do it, I'd be so very greatful....I just want to record an EP and it's impossible to do with no drums....

como debo configurar la UX2 con SONAR 7???

support@line6.com — Sat, 04 Apr 2009 15:11:35 GMT

Hola a todos, tengo problemas de latencia con la UX2, tengo un muy buen computador pero la latencia no se aparta de mi sombra, como deberia configurar la UX2 con SONAR 7 para poder sacarle el 100% a esta interface??

gracias

Problem with Pod Studio UX2 in Windows 7/32bit (blinking clip lights)

support@line6.com — Thu, 29 Oct 2009 09:39:46 GMT

Hi!

I read the forum and saw that some of you have problems with your line 6 products in windows 7 but i didnt find a similar problem to mine. So when i connect the ux2 via USB to my computer it doesnt work, it wont get recognized neither by the computer or line 6 monkey, and the only thing that is working are the clip lights that are blinking. Does someone have a similar problem, did you fix it? Thank you for the answers!

Bye Kalas

UX2 putting out crackling sound & audio dropping out

support@line6.com — Fri, 24 Jul 2009 03:40:21 GMT

When I plug my headphones into my UX2 all I get is loud crackling and popping. The sound of the guitar is faint by comparison, even at high volume, and the sound of the guitar is dropping in and out, almost like a really bad tremelo effect. I've never had this problem before in the year or so that i've had the UX2. I didn't drop it or anything like that either so it's surprising that it would quit like this

Unable to determine noise source using UX1

support@line6.com — Sat, 01 Aug 2009 10:07:09 GMT

Hi.

After several months of the UX1 running smoothly, I am now experiencing very loud Buzz/popping through my pc speakers?(especially bad when playing through the overdriven guitar sounds). I imagined that it was a problem to do with drivers or the USB port which became corrupted.

I have a Sony Vaio laptop, running XP version 2002, service pack 2. I have however tried loading the Gearbox program and the UX1 device, onto 2 other laptops, as well as playing on a different guitar, in order to pinpoint the noise source, with no avail?! The same noise is still heard... Last night I downloaded Pod Farm 1.11, but the same issue occurs. I have also downloaded the new UX1 driver and USB patches from your site, but once again the annoying buzz persists! I'm all out of ideas and hope that you can help.

Regards,

Andrew (the infamous Pinkfrog)

Using POD Farm with ilok and Pod XT Pro

support@line6.com — Mon, 09 Nov 2009 05:54:26 GMT

Hi.

I have POD farm authorised to both my Pod XT Pro, and also the standard version authorised to my ilok. My problem is when Pro Tools HD starts, it automatically uses the ilok version to authorise Pod Farm instead of my Pod XT Pro which means i can't use any of my model packs installed on my XT Pro (i have all of them)

How can i tell Pod Farm to use the XT Pro to authorise instead of the ilok?

cannot hear any sounds from PODfarm/UX1

support@line6.com — Sat, 18 Apr 2009 01:32:16 GMT

I just install the UX1 and did the updates and all that... I can see on the main PODfarm screen that it detects everytime I hit a string on the guitar, so that part is working, but I can't hear anything out of my speakers. I tried a few things control panel and changed the device to UX1, but still no luck. I'm pretty good with computers and I have a good computer, but this one has me stumped. Thanks for any help!

Line 6 pod studio gx problem!!

support@line6.com — Tue, 03 Nov 2009 19:10:16 GMT

Hi all,

I have a problem with my Pod Studio GX. I've installed it on my PC and it works fine, but my Macbook Pro doesn't detect it and I can't do anything. I've tried reinstalling all the drivers and programs, but it still doesn't work. Does anybod know how to fix this problem?

Cheers,

Lysy87

lost my guitarport have an ilok. and i want to transfer my packs from this web-sight how do i do this

support@line6.com — Fri, 04 Sep 2009 20:00:24 GMT

lost my guitarport have an ilok. and i want to transfer my packs from this web-sight how do i do this with out my guitarport.

ux8 crashes windows

support@line6.com — Sun, 26 Jul 2009 18:04:59 GMT

i recently got a ux8, i installed it on windows xp and its seemed to work ok as a stand alone application through pod farm and gearbox. however when i open cubase sx3 the whole computer freezes immediatly and the ux8 clips lights flash from side to side (indicating a loss of the usb connection) i have to switch the power off to my computer and reboot. It does sometimes, but rarly crash without cubase open. i have reinstalled all the line 6 software, cubase software, disabled onboard drivers, unplugged all other usb connections but it still seems to happen all the time.

I use a dual boot system and have founds that it works fine in windows 7 64 bit, however all my vst software is on xp. any ideas?

Midi Foot Controller? Pod Studio UX2 / Pod Farm

support@line6.com — Tue, 28 Apr 2009 05:35:16 GMT

I have purchased the UX2, installed Pod Farm and everything works great. I have been using riffworks for the last year for all my recording. So I popped in the Abelton Live Lite disk that came with UX2, and everything installed and is recording guitar great. Quick question:

I am trying to get my midi (M-Audio keyboard O2) set up in Abelton, and I can't seem to get it. Says that the UX2 needs a foot controller for Midi? Where do I get this? I don't see one listed anywhere. How is this going to work with my keyboard? I am confused since I don't need this set up when I use it in Reason.

Any help is appreciated.

Thanks

Rummy

trying to install Tone Port UX2 driver/hardware onto new Vista 64 laptop

support@line6.com — Sat, 18 Jul 2009 22:58:08 GMT

I have a new PC that meets all syst. req and then some....vista 64 bit...downloaded all line 6 monkey and latest drivers.

the Line 6 driver will not load correctly/the device is not detected on plug in.

I am plugging direct into usb port (again, brand new computer)

Have gear box, riff works all installed fine.

Have tried numerous times.

PLEASE advise!
thanks

Steph

Toneport ux1 interface, how to open

support@line6.com — Sun, 15 Mar 2009 15:58:11 GMT

Hello,

is there a way to safely open the interface, there are no screws...

Thanks

Toneport KB37 and Mac OS X problem

support@line6.com — Sun, 10 May 2009 23:25:59 GMT

my question regards using Toneport KB37 with Mac OS X...I've installed the driver from the net, but when running Garage Band I can't find detailed audio preferences to select mic 1 and mic 2, line 1, line 2 etc....the only inputs avail are mono 1 -4 and stereo 1/2 stereo 3/4, none of which allow the mic's to be sending signal. I'm used to running my KB37 with PC Windows and now embarking on Mac...Any advice would be greatly appreciated!

No Output on POD XT Pro

support@line6.com — Sat, 14 Mar 2009 11:48:03 GMT

Having used done the lates line 6 updates on line i have now, no utput on my XT Pro. NO headphone output or any other

Please advise.

Regards,

Line 6 Toneport KB37

support@line6.com — Fri, 01 May 2009 15:44:25 GMT

I want to sell my Toneport KB37 Can the rights to the software be tranferred to the new owner or only the hardware...?

FXJunkie + POD Farm Conundrum.edit

support@line6.com — Mon, 07 Sep 2009 20:04:38 GMT

I own a PODXT live for shows/jam space. Months later, I bought a UX2 for home computer use/recording. A few months later, after buying ableton Live, I bought POD FARM PLUGIN. Now the UX2 comes w3ith FXJunkie, and Pod Farm is free. Can I download FXjunkie for my UX2, refund my paid FARM, and download the FREE POD Farm? Is there a way of doing this without destroying my ableton live tracks that Ive used pod farm with already? *this post has been edited after hours of looking through forums* Thank you very much for your help in advance, I have many line6/propellerhead products and would love to get the most out of them!

Message was edited by: Blackbane

Downloading UX2 driver problems (HTTP 403 Forbidden??)

support@line6.com — Fri, 19 Jun 2009 13:15:50 GMT

Hi all,

after registering my toneport UX2, i kept trying to download the drivers form Line 6 Monkey, but i keep getting the same error message 'HTTP 403 Forbidden' so what am is upposed to do since the gear won't work unless i install the driver,

Thank you,

Purchase refund

support@line6.com — Fri, 10 Jul 2009 14:42:02 GMT

I was just wondering if you offer refunds on podfarm upgrades?as i have accidently just purchased the power pack which i already have, while i meant to purchase the triple pack deal. Any help will be much appreciated.

Thanks

Scott

Pod Farm Work with other interfaces?

support@line6.com — Thu, 07 May 2009 12:42:56 GMT

Hello. My name is Taylor and I am fairly new into the recording game. I really don't have the cash for high level recording amps so modeling software seems the best idea. I have done a fair amount of research and I'm kinda confused about one issue. Will the pod farm software work with external interfaces other than the line 6 brand stuff?

I am thinking about purchasing a Presonus Firepod Firewire Interface (for more versatility in recording drums) and the Pod Farm Platinum software. Can I use the interface (external non-proprietary) to send my signal to the Pod Farm software to multi-track in adobe audition 3.01 for windows?

monkey hangs while @ activate features

support@line6.com — Tue, 13 Oct 2009 21:52:04 GMT

it's got a full blue bar but if I try to exit it tells me it's not done and could mess up my machine.

2 hrs. it's just sitting there

amd 1.8

2 gb ram

win xp

bought it to use with record.

I really want to know if I should force a quit or not??

Can't Activate My Pod Farm Platinum

support@line6.com — Mon, 27 Jul 2009 20:19:58 GMT

Hi there,

I purchased a Pod Farm Platinum stand alone, however when I open the Pod Farm stand alone software, none of the Platinum guitar amps, cabs or anything is there, also it looks like I'm not even allowed to active these features. Please I need assistance ASAP!

Thanks

Etienne Venter

No Authorized Device on Mac

support@line6.com — Mon, 12 Oct 2009 06:53:21 GMT

I get this message every time I open a Project in Logic Pro 9.0.1 that uses Pod Farm Platinum plugin with a Toneport DI (used only as a dongle).

It's been happening since Logic 8.0.2 and from OS 10.4.9 thru 10.5.8.

It's happened the entire time I've had the PodFarm / Toneport DI combo

I hit play and notice all my guitar and bass sounds are dry (no podfarm sound).

So, I open one of the Podfarm plugins and this message is plastered over the plugin interface.

Also, at the bottom of the plugin interface is this:

I've searched the Forum and tried a different USB cable and every USB port (5) on my computer with nothing plugged in but keyboard and mouse...and it's still the same.

What is very interesting, is that disabling Core Audio in Logic and then re-enabling it fixes the problem every time.

This makes me think it's not a USB overload (too much USB stuff hanging out of your computer) or a faulty USB cable or USB port (I've tried them all).

Something about disabling and then re-enabling Core Audio fixes it for me.

I'm glad i have a workaround, but it is a Major Drag to have to wait for Logic to load everything twice.

Does anyone, especially LINE6, have any insight into what I'm finding with the Core Audio thing?

Pod Farm: 1.11

Driver: 4.2.4

USB Firmware: 1.0.2

Line 6 Monkey: 1.30

Mac Pro 2x 2.66 GHz Dual-Core Intel Xeon with 5 GB RAM, OS X 10.5.8,

Logic Pro 9.0.1 & Logic Pro 8.0.2, RME FireFace 400, UAD-1 PCIe & UAD-2 duo

POD Farm / Gear Box / Pedals consolidated

support@line6.com — Fri, 27 Mar 2009 15:07:18 GMT

Following a very useful and prompt response to my last post, though I'd have another go. In using the KB37 and after reading various posts are all these statements correct:

1) PODFarm does not support footswitches or expression pedals of any kind?

2) Gearbox does, and will suppost ANY footswitches or pedals?

A somewhat trivial extension of 2 above is this: would gearbox support this device?

[ M- Audio Black Box Pedal Board ] - http://www.m-audio.com/products/en_us/MAudioBlackBoxPedalBoard.html

i.e. would it allow it to be used as 2 independent footswitches and an expression pedal simulataneously?

Thanks in advance

Robert

I need help with my license keys!

support@line6.com — Sun, 22 Mar 2009 15:13:07 GMT

Hy guys, i need you help with this one

I have aquired a second Toneport UX1 and have successfully registered the serial number to my account.

I have also purchased the license key for Pod Farm Plug-in. (i am considering buying the Metal Shop and Fx Junky model packs providing this following problem is sorted out)

I have a Macbook AND a Windows PC and wish to have Pod Farm Plug-in running on BOTH computers simultaneously. I have been successful in activating the license key on my macbook but sadly when i tried to activate Pod Farm license key on my windows pc, it said that it was already registered to TonePort UX1 - ESN 1664363

Is there any way possible for me to use the same license key on both computers without having to buy it again.

The reason why I have 2 of the Toneport UX1 is so that I can be running both computers simultaneously with a toneport plugged into my Macbook and the other toneport plugged into my Windows PC (this helps to get work done faster in my home studio)

How can i successfully use the same Pod Farm Plug-In License Key on both devices without purchasing a second license key. (I think that its ridiculous that i have to buy the exact same thing a second time)

Hope you can help me.

Best Regards

Alex

Pod Farm 1.11 doesn't recognize UX8 upon startup, must open a second time

support@line6.com — Wed, 01 Jul 2009 01:10:55 GMT

Hi All,

This one is strange... When I open Pod Farm the first time, I get the 'No device recognized' dialog, and then Pod Farm shows 'no authorized device, audio processing is disabled' at the bottom. Then when I close and reopen the program, the UX8 is shown as correct, and everything works.

Any ideas?

- David

How do I turn on phantom power on the XU1,

support@line6.com — Mon, 04 May 2009 10:08:27 GMT

I purchased based on the pictures and the advice of Betta Music, all indications where for a condenser mic even in al illustrations, how do I turn on the phantom power or should it be automatic as stated by the sales team.

high pitch noise on toneport ux8

support@line6.com — Wed, 08 Jul 2009 23:44:04 GMT

I just bought a ux8 and when i plug my powered yamaha speakers in to the analog outs (using both trs and ts cables) i get a high pitch noise both through the speakers and headphones. the problem goes away if i connect the ux8 to my home stereo via spdif. the problem only seems to occur when i have an audio application open... be it wmplayer or sonar. is this a known issue?

older kb37 with a noob user!

support@line6.com — Wed, 05 Aug 2009 13:46:36 GMT

hi im a complete newbie to this....

I have just updated with 'monkey'....am on a macbook....so came with gearbox etc...

so monkey has given me pod farm, which i am liking!!...

thing is...with version i have downloaded ...to i need to purchase the $49 pod farm upgrade?...so i can use in logic etc.

im just confused to weather i have a bog standard version of pod farm, or the same version that the new kb37 are retailed with.

also the new ones come with fx junkie.....is this available for older kb37s or do i need to pay...

just seems the pod farm i have dl'd from here is thin on the ground ...not much to play with amp or room wise...

any advise would be great....as was prev used to just pluggin in my boss gt6 to my firewire mixer...and away i went...

cheers

moogie

help please....i cant even get it reconised in garage band ......keyboard is working fine.....

cant even figure out if this version is daw compatable.....surley i would see it in my instrument selection somwhere...

please help im rubbish

TonePort Latency

support@line6.com — Fri, 17 Jul 2009 02:27:38 GMT

Hi, I want to buy a TonePort KB37, but before buying it I would like to know which is the minimum latency when running native plug-ins like the ones that comes with Live!, or the native effects on Nuendo or Waves, etc.
I´ll be wainting for your answear.
Thank you.
Emiliano Robles.

Gearbox transfer from X3L to Studio GX

support@line6.com — Thu, 30 Jul 2009 23:40:34 GMT

Hi,

A while back I purchased the gold gearbox package to go with my X3L.

Just before buying gearbox I asked (on the old forum) about being able to transfer it if I changed pods.

So I've just bought a studio gx and when I followed the transfer instructions if shows gearbox as working with the GX but with lots of amp models missing.

I'm guessing the full gold package didn't transfer?

Any thoughts?

I don't want to have to pay again to get the models I was using when the X3L acted as a dongle?

Many thanks

John

studio gx

support@line6.com — Sun, 08 Nov 2009 15:35:22 GMT

hi, i got sound from the lineout of studio gx but cant get sound from my computer output , is that ok or something wrong with the setting , please help me ....

UX2 Plug-in Logic Pro 8 not Working

support@line6.com — Tue, 05 May 2009 23:06:03 GMT

Hello,

I've bought the Pod Studio UX 2.
I've got a macbook pro with Logic Pro 8 on it.

I've installed Pod Farm and all latest drivers: (Line 6 Monkey Update says:)

Drivers 4.1.0

USB Firmware 1.02

Gearbox NO

POD Farm 1.11

RiffWorks 2 Line 6 Edition NO

Line 6 Monkey 1.27

In the Optional Add-Ons tab of Line 6 Monkey

FX Junkie and POD Farm are Marked with a 'v'.

My UX2 is activated and recognized and in Logic Pro 8 I can hear the computer sound through the UX2 with a headphone.

The Audio Device (Core Audio) in Logic is enabled and the UX2 Device is selected.

The standalone POD Farm software works with my guitar. I can see a signal and I hear my sound with all the Amps/Effects available.

THE PROBLEM:

I want to use my UX2 as a plug-in for Logic. (3 questions)

Do I have to pick 'New software instrument track' or 'New audio track'?
When I pick one I select the plug-in as an insert. Is that correct?

When I do I can see the plug-in (I get the pop-up screen with all the amps and effects etc.). But I don't get a signal from my guitar.

So the standalone version works but the plug-in doesn't get the signal from my guitar.

What can I do?????

Please help!!!

Thanks

Patrick

Seeking a refund for Pod Farm

support@line6.com — Wed, 15 Jul 2009 05:22:42 GMT

Hi,

Yesterday I payed for a Pod Farm plug-in licence $99. After getting confused with this iLok business (when expecting a straight download) I reaalised i had made a mistake. I have a Toneport UX2 and can purchase it for $49 through the line 6 monkey.

Can you please cancel this purchase and refund my credit card so i can purchase Pod Farm through the line 6 monkey to use with my Toneport UX2. Sorry for the trouble I was confused.

Thank you

Much appreciated

Steve

UX1 constantly crackeling

support@line6.com — Tue, 31 Mar 2009 05:45:27 GMT

Hi, i have just purchased a POD Studio UX-1 and from day 1 it's had a constant crackeling when i open the POD farm. I took the specs sheet to the computer guy when i bought it ( new ) so i don't think it's a compatability issue. I have downloaded all the software upgrades, and the store where i got it from have no idea. It's been 3 months now and i'm itching to use it! My computer is a Hp running Windows Vista Home Premium, AMD Turion X2 Dual-Core Mobile RM-70, ATI Mobility Radeon HD 3450.

LIne 6 Studio Power Supply

support@line6.com — Thu, 05 Nov 2009 14:08:54 GMT

Hi line 6 I am about to purchase a studio ux1 or 2. I live in Ireland. If I purchase online from a dealer in USA will it work here in Ireland or will there be a problem with the power supply?

TonePort UX8 LEDs flash when I exit iTunes on Mac OS X

support@line6.com — Thu, 02 Jul 2009 13:11:49 GMT

Here's a weird one... when I exited iTunes on my mac, the Toneport's VU Meter LEDs started flashing like the device wasn't plugged in. It was still generating sound, but still, it was weird. Is there any way to fix that? I use iTunes a lot, and that behavior will drive me crazy.

Thanks!

- David S.

POD Farm sounds for 'fat' strat

support@line6.com — Sat, 28 Mar 2009 16:15:10 GMT

Anyone found any settings on POD Farm you like for a fat strat? I love the 'bite' I get with the switch selection between 1 and 2 and 2 and 3, the 'between' pickups selection for the strat. Played a Les Paul most of my life but have been really enjoying this strat for the past few years. Much lighter too!!! thanks

Custom preset changes tone with different laptop

support@line6.com — Sun, 15 Nov 2009 09:16:42 GMT

I changed my laptop, and copied all the custom tones I had created. Now the same patches sound different. is there any processing done by the laptop that is responsible for deterioration of sound quality ?.... this is very strange. Need help ASAP as I am in themiddle of recording an album.

-regards,

six-stringer.

Spidervalve into UX2

support@line6.com — Thu, 20 Aug 2009 12:58:08 GMT

Hello there,

can i run my spidervalve hd100 into my ux2 ?

Must the gtr be connected to the head, right?

Thx a lot.

Upgraded Line6 POD Farm and lost my Logic plugin settings

support@line6.com — Tue, 28 Apr 2009 19:44:13 GMT

When I upgraded to the current version of POD Farm, my Logic Pro 8.0.2 sessions have all lost their POD farm plugin settings and instead load the default plugin setting. And if I try to load saved Logic settings from the droplist, the same thing happens.

Did Line6 give any thought to how this would impact Logic users? I have effectively lost all my POD Farm settings in all my current productions. I think I'm going to have to restore the old version of the plugin from my backup drive. Looks like I'm stuck on an old version because Line6 treated the upgrade like it's a brand new plugin. Am I upset with Line6 for this? You betcha.

Any thoughts?

POD Farm vs. GearBox? What's the difference?

support@line6.com — Sun, 15 Mar 2009 18:51:33 GMT

I'm just wondering if the Pod Farm plug-in does anything differently than GearBox that would justify having both.

I have the Pod XT live, all 5 model packs, Riffworks, GearBox Plugin, and a Guitar Port Online subscription.

Needless to say, I'm a line 6 junkie. (2 amps, and pod 2.0 as well).

The stand-alone PodFarm I have (email promotion - it seems I don't qualify for the free upgrade that works as a plug-in) doesn't work with the XT live, so all I can tell is that the interface is awesome, and looks easy.

So, does it do anything the GearBox plug-in doesn't?

At $50 bucks, seems cheap enough to try, but will it be redundant?

As always, Thanks in advance

Is Toneport UX1 compatible with a 64 BIT OS?

support@line6.com — Fri, 03 Jul 2009 09:48:17 GMT

I'm about to buy a latop from Dell who now only provide the option to get Windows Vista 64 BIT. Will my Toneport UX1 be compatible with this operating system?

downgrading driver necessary for pod farm plug in to work with podxt

support@line6.com — Sat, 31 Oct 2009 22:35:36 GMT

Found a solution to my problem:

http://line6.com/community/message/88108#88108

The idea to re-install Pod Farm was good, but not because I had the wrong version of Pod Farm or the Pod Farm plug in.

Rather, the current Pod Farm installer ALSO contains drivers for the PodXT and several other devices. Those drivers are actually OLDER than the current, standalone drivers you can download.

BUT, I was desperate, and after re-installing the current versions of the software and drivers, I took a gamble and installed those older PodXT drivers from the Pod Farm installer and viola! The PodXT is working as a dongle/the Pod Farm Plug In is now working, in Cubase.

You know whats really funny: I actually had a similar problem and solution before and forgot about the need to AVOID the current PodXT drivers! I found this on a separate machine, with a different DAW, DI input, etc. And I guess in my mind that was an anomoly.

But the truth is, that was the solution on my main rig, as well. Doh! Only took me a week to figure it out.

Is there a plan to release new drivers that don't have this problem? Near as I can tell, the only difference between the two driver versions I am using is a fix for the UX2 device.... so I'm not missing much. But who knows whether later there might be something more significant, like when PodFarm standalone is revised to work with a PodXT as a dongle (for example).

Input Output Gain Knobs Still Don't Work in V 1.11

support@line6.com — Mon, 04 May 2009 03:30:13 GMT

I have updated to version 1.11 and my input output gain knobs still revert back to max everytime I close and re-open my DAW. I'm using Sonar Home Studio Version 4.

Please provide any insight you can. Thanks.

Dell Vostro 200, Toneport DI. Pod Farm Platinum V1.11

White Noise.. Why?

support@line6.com — Tue, 17 Mar 2009 17:08:14 GMT

I use a fairly new macbook pro with 3g memory. I use Cubase studio 5, and I can upload all the softsynths I have without using much of the VST performance.

I use a USB Line6 UX2 sound card. The problem is that that when I play, everything suddenly peaks in an explotion of white noise!! It doesn´t happen every time I hit a note, but maybe after every 20th note I play. It´s really annoying!! Can someone tell me how I set up my UX2 so that it works with Cubase studio 5? Please?

Before I loose my mind? Love Jon Martens (Vocals and production in The Pussyclub)

Pod Farm Plug-In Not Working

support@line6.com — Sat, 09 May 2009 17:41:34 GMT

I recently purchased the Pod Farm Plug-in to use with my Toneport UX2 within Apple Garageband and Logic Pro. However, when I try to access the Pod Farm plug-in within either application, I get a "No Authorized Device: a required device is either not authorized or not connected..." dialog box. Then Pod Farm comes up but it does not function.

The stand-alone version of Pod Farm does work with my UX2, and I have confirmed via Line 6 Monkey that all updates are installed and the UX2 is registered and authorized.

However, I still can't get the Plug-in to work.

Please advise,

Scott

Dual Tone/Dual Output

support@line6.com — Sat, 04 Apr 2009 08:46:33 GMT

Hey,

does anyone know if its possible to output pod farm plug in to seperate tracks when in dual tone mode?

Problem with Ux2 Downloads

support@line6.com — Thu, 07 May 2009 07:07:49 GMT

Not to long ago i bought the line 6 pod ux2 It (Supposedly comes with fx junkie and gear box and more ) I cant Even get the line 6 monkey everytime i click download it takes me to a blank page . I wrote the friendly people at line 6 support and never got a responce Thanks for the support. If someone knows how to get these downloads i really could use the help . Thanks Joe

No audio/garbled audio with Toneport UX1

support@line6.com — Thu, 04 Jun 2009 13:26:17 GMT

Hi, everyone. I've got a Toneport UX1 connected to my new Mac Pro. I installed the drivers and connected the cables properly and selected the UX1 as the audio input and output device in the OSX audio preferences. When I turn on my Mac, I don't get any sound out of the Toneport. This is the case whether I'm trying to record my electric guitar in Garageband or just playing a song in iTunes.

I can get audio eventually, but it's a real pain. If I unplug the USB cable from the Toneport, I hear audio from the Mac's internal speaker. Then, I plug the USB cable back into the Toneport and I get audio from its output over the speakers, but it's garbled and unlistenable. If I restart the system, then I get normal audio out of the Toneport and I can use iTunes and Garageband. I have to go through this procedure every time I start the system or wake it up from hibernation.

Can anybody offer any suggestions?

Tone port Ux2

support@line6.com — Tue, 14 Jul 2009 23:17:13 GMT

Hello

My names Stephen Herlihy

I purcahsed a toneport Ux2 in August of 2007.

I'm Having Major Problems Lately with the product.

It's definely Physical damage not software.

Once I Arm a track to record the levels automaticly rise high. Causing feedback and making it impossible to record music.

I was wondering am I still in Warrently ?

Is it possible to open the Toneport? Its seemed clipped shut and impossible to fix

Please contact me A.s.a.p. as my recording business suffering

Thanks

Strange noise when opening any audio application on macosx

support@line6.com — Fri, 10 Apr 2009 18:19:54 GMT

Hello,

I have received new speakers today (adam A7, connected on output 1/2) and wanted to watch a movie using my ux8 as audio output and I noticed a noise (with some kind of periodicity pattern) that is really annoying. I tried several things and discovered that this noise appear when I try to use the UX8 in any audio application.

If no application is on and the ux8 connected and on, nothing strange

If I open any application (podfarm/vlc/itunes/sound preferences) then the sound comes.

this sound really disturb me.

UX2 won't use POD X3L as dongle for POD Farm Plugin

support@line6.com — Tue, 03 Nov 2009 00:34:39 GMT

I just bought a POD Studio UX2 b/c I needed a better mic input than what's in my POD X3 Live and I need to be able to record 2 mic inputs at the same time. I also bought it so I don't have to deal w/ the X3L audio drop outs.

What I'm trying to do is use the UX2 as my soundcard in Sonar 7 and 8.5 and have my POD X3L connected as a dongle, so I can use everything in the POD Farm plugin.

The problem is that the POD Farm plugin is only letting me select what the UX2 has in the POD farm Stand Alone.

Sonar only lets me select one soundcard at a time, so I have the UX2 selected.

I am able to use both of my PreSonus soundcards and my POD X3L as a dongle and get access to everything in the POD Farm Plugin.

Please help.

Thanks,

Lou

New UX2 Died! Any ideas?

support@line6.com — Wed, 08 Apr 2009 09:05:23 GMT

I set my new UX2 up and it played fine for 30 minutes. I even visitied the web site and downloaded Gear but then it carckled and died. No signal at all being picked up from the guitar - changed leads and guitars but same result. I uninstalled the software and then re-installed but same problem. Anyone got any ideas or the same problem.

My kb37 isn't find as midi keyborad but work as sound card :/

support@line6.com — Wed, 24 Jun 2009 16:57:07 GMT

Hello, those day I was trying to record some stuff using midi but now (and I've not nothing apparently), my kb37 isn't found by reason or ableton live as midi input but is work to record my guitar, or as a simple sound card for my pc... Need some help!